If a repo manifest is updated so that project B is placed within a
project A, and if project A had content in new B's location in the old
checkout, then repo sync could break depending on checkout order, since
B can't be checked out before A.
This change introduces checkout levels which enforces right sequence of
checkouts while still allowing for parallel checkout. In an example
above, A will always be checked out first before B.
BUG=b:325119758
TEST=./run_tests, manual sync on ChromeOS repository
Change-Id: Ib3b5e4d2639ca56620a1e4c6bf76d7b1ab805250
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/410421
Tested-by: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Greg Edelston <gredelston@google.com>
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Gavin Mak <gavinmak@google.com>
Prior to this change RepoChangedException would be caught and re-rasied
as a different exception. This would prevent RepoChangedException
handler from running in main.py
Bug: b/323232806
Change-Id: I9055ff95d439d6ff225206c5bf1755cc718bcfcc
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/407144
Tested-by: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Most times a repo sync after some time (week+) results in a bunch of
messages, which are not very useful for average user:
- discarding 1 commits
- Deleting obsolete checkout.
Bug: N/A
Test: repo sync
Change-Id: I881eab61f9f261e98f3656c09e73ddd159ce288c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/397038
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Tested-by: Tomasz Wasilczyk <twasilczyk@google.com>
In the case of a project being removed from the manifest, and in the
path in which the project used to exist, and symlink is place to another
project repo will start to warn about partial syncs when a partial sync
did not occur.
Repro steps:
1) Create a manifest with two projects. Project a -> a/ and project b -> b/
2) Run `repo sync`
3) Remove project b from the manifest.
4) Use `link` in the manifest to link all of Project a to b/
Bug: 314161804
Change-Id: I4a4ac4f70a7038bc7e0c4e0e51ae9fc942411a34
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/395640
Reviewed-by: Gavin Mak <gavinmak@google.com>
Tested-by: Matt Schulte <matsch@google.com>
Commit-Queue: Gavin Mak <gavinmak@google.com>
When a new shared project is added to manifest, there's a short window
where objects can be deleted that are used by other projects.
To close that window, set preciousObjects during git init. For
non-shared projects, repo should correct the state in the same execution
instance.
Bug: 288102993
Change-Id: I366f524535ac58c820d51a88599ae2108df9ab48
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/390234
Commit-Queue: Josip Sokcevic <sokcevic@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
If a KeyboardInterrupt is encountered before an error is aggregated then
the context surrounding the interrupt is lost. This change aggregates
errors as soon as possible for the sync command
Bug: b/293344017
Change-Id: Iac14f9d59723cc9dedbb960f14fdc1fa5b348ea3
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/384974
Tested-by: Jason Chang <jasonnc@google.com>
Commit-Queue: Jason Chang <jasonnc@google.com>
Reviewed-by: Gavin Mak <gavinmak@google.com>
Per discussion in go/repo-error-update updated aggregated and exit
errors for sync command.
Aggregated errors are errors that result in eventual command failure.
Exit errors are errors that result in immediate command failure.
Also updated main.py to log aggregated and exit errors to git sessions
log
Bug: b/293344017
Change-Id: I77a21f14da32fe2e68c16841feb22de72e86a251
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/379614
Reviewed-by: Aravind Vasudevan <aravindvasudev@google.com>
Tested-by: Jason Chang <jasonnc@google.com>
Commit-Queue: Jason Chang <jasonnc@google.com>
An investigation go/git-repo-shallow shows a number of problems
when doing a shallow git fetch/clone. This change introduces an
environment variable REPO_ALLOW_SHALLOW. When this environment variable
is set to 1 during a repo init or repo sync all shallow git fetch
commands are replaced with partial fetch commands. Any shallow
repository needing update is unshallowed. This behavior continues until
a subsequent repo sync command is run with REPO_ALLOW_SHALLOW set to 1.
Bug: b/274340522
Change-Id: I1c3188270629359e52449788897d9d4988ebf280
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/374754
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Tested-by: Jason Chang <jasonnc@google.com>
If interrupt signal is sent to repo process while sync is running, repo
prints stack trace for each concurrent job that is currently running
with no useful information.
Instead, this change captures KeyboardInterrupt in each process and
prints one line about current project that is being processed.
Change-Id: Ieca760ed862341939396b8186ae04128d769cd56
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/357135
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
repo sync progress bar is misleading. Many bug reports mentioned that
repo is stuck at the repo that is currently displayed in the progress
bar. Repo sync actually shows what repository is the last processed.
This change makes that obvious.
Change-Id: I962bf0bc65af7ac0ed98db86e9144f07d9e1f96f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/357134
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
This can potentially show up when sync'ing projects with submodules
that are not declared in the manifest as well as the internal
'.repo/repo' project, which is likely not desirable from a user
standpoint.
Change-Id: I93d7fcd6e3fd1818357ea4537882a864dea9942c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/355920
Reviewed-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Michael Kelly <mkelly@arista.com>
If syncing in _FetchOne fails with GitError, sync_result does not get
set. There's already a separate local variable for success; do the same
for remote_fetched instead of referring to the conditionally defined
named tuple.
This bug is originally caused by a combination of ad8aa697 "sync: only
print error.GitError, don't raise that exception." and 1eddca84 "sync:
use namedtuples for internal return values".
Change-Id: I0f9dbafb97f8268044e5a56a6f92cf29bc23ca6a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/354176
Tested-by: Karsten Tausche <karsten@fairphone.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
Do not use a progress bar when not doing GC, and restrict activity in
that case to only repairing preciousObject state.
This also includes additional cleanup based on review comments from
previous changes.
Change-Id: I48581c9d25da358bc7ae15f40e98d55bec142331
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/353514
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
REPO_AUTO_GC was introduced as a way for users to restore the previous
default behavior, since the default changed at the same time as the
option was added. As such, it should be marked as deprecated, and
removed entirely in a future release.
Change-Id: Ib73d98fbea693e7057cc4587928c225a9e4beab2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/353734
Reviewed-by: Sam Saccone <samccone@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Josip Sokcevic
Greg Edelston
Jason Chang
Yiwei Zhang
Tomasz Wasilczyk
Matt Schulte
Jason R. Coombs
Daniel Kutik
Jason R. Coombs
Mike Frysinger
Aravind Vasudevan
Gavin Mak
Michael Kelly
Karsten Tausche
LaMont Jones