Bump version of u-boot from 2021.10 to 2022.01, as at it, take
the chance to squash some patches and reduce the number of
them.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Not that we're not forcing TAP networking the SSH connections work, so
we can run the full test suite.
We have to skip parselogs currently as there is an error:
software IO TLB: Cannot allocate buffer
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
There's no need to set append in the extlinux.conf, as the kernel will
pull the settings passed from runqemu via the DeviceTree.
By explicitly setting append here the kernel doesn't look in the DT, and
the extlinux.conf hardcoded a TAP network configuration which meant that
networking fails for runqemu using slirp.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The default root device is /dev/vda, because typically a bare filesystem
is mounted there.
However, qemuarm64-secureboot uses a disk image with partitions, so this
should be /dev/vda2. Currently this works because qemuarm64-secureboot
has an extlinux.conf which explicitly sets the root device, but we're
working at removing that.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Rename the fragment that installs a SSH daemon to 'sshd' instead of the
generic 'packages'.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
When using -machine=virt,secure=on KVM cannot be used and will cause an
error, so forcibly disable the use of KVM.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
As we're in a CI environment there's no need to generate unique SSH keys
on boot. Installing the pregenerated SSH keys means they don't need to
be generated, which saves a reasonable amount of boot time due to the
lack of entropy if virtio-rng isn't available.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add a new recipe for SCP Firmware 2.10.
As we're late in the release cycle, keep 2.9 in the tree so that BSPs
that can't be tested in time can stay with 2.9 for now.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
In preparation for SCP Firmware 2.10 being integrated, make this append
version-specific so that BSPs can select which SCP release they have
been tested with.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
A virtio-rng is available from FVP_BaseR_AEMv8R version 11.17, so add
to the device tree and enable the correpsonding FVP configuration flag.
This improves the boot time and removes the following warning in the
boot log:
random: udevd: uninitialized urandom read (16 bytes read)
Issue-Id: SCM-4304
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Ic935d0b935e21965a489a55db09c4a5f9ac51366
Signed-off-by: Jon Mason <jon.mason@arm.com>
$datadir is for architecture-independent files, and a compiler is not
that.
Install to $libexecdir, and clean up the installation commands whilst
there.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update corstone500 documentation to reflect the new build
infrastructure (kas) and the in tree run of the fvp using the
runfvp command.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add kas and ci, including testimage support for corstone500
platform. And for all to work add also the FVP setup.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add final wic image that is provider by corstone500-image
target. As at it, remove unnecessary specific filesystem
types.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Now that we have the wic_nopt class in meta-arm we can add the
the wks file to create the final image for this platform.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Machines which don't have working network stacks in a FVP can still run
a useful testimage, because it will validate that the machine will boot
to a login prompt on the console.
However, we can't set TEST_SUITES to "" because testimage assumes that
was a mistake, so add a no-op test case for use in these situations.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Currently this just executes the runfvp tests, but we can extend it over
time.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Split the base local.conf configuration into base (absolutely needed)
and setup (typical configuration). This is needed as oe-selftest needs a
minimal configuration to execute in, for example doesn't inherit
rm_work.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Until testimage tells the controller the basename of the image, make sure
to strip all suffixes from the image name to get the base name, not just
one. Machines such as corstone500 have images called .wic.nopt, so just
stripping one isn't sufficient.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Check for telnet on startup to avoid mysterious failures later when
telnet isn't available.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
runfvp could encounter an error but the exit code remained as 0.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We were accidentally assigning instead of adding to INHERIT.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The 64-bit fvp-base machine uses the upstream fvp-base-recv devicetree,
but fvp-base-arm32 was accidentally using the old
fvp-base-gicv3-psci-custom that we patch into the kernel.
As the only difference between these platforms at a "hardware" level is
whether the cores boot in 32- or 64-bit mode, they should both use
fvp-base-revc.
This isn't trivial as devicetree files need to be under the correct
arch/ directory, so we need to symlink into arch/arm the right files
from arch/arm64.
This has several improvements, but primarily virtio networking works so
we can now use testimage with fvp-base-arm32.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
fvp-base pulls in features/net/net.scc, so fvp-base-arm32 should too.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add more helper variables for the FVP version to help construct URLs.
If PV is 1.2.3, then VERSION is 1.2 and BUILD is 3.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Use wildcards in the FVP_ARCH assignment, as older FVPs use _GCC-6.4
whilst newer FVPs use _GCC-9.3.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the Arm GCC source to the latest version. Also, update the GCC
patches to apply cleanly, removing those that are no longer relevant.
Add the CVEs from Sumit Garg's series.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Create a job artifact containing all of the task logs if the job fails.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Explicitly enable use of CRC instructions: we configure fvp-base to have
armv8.4 cores, but the default uboot config disables crc (see uboot 51d8367d8).
Keep fvp-base-arm32 on 2021.10 as the arm32-specific patches need
rebasing, and a trivial rebase doesn't boot successfully.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The bulk of the FVP_* variables are common, so move them into
fvp-common.inc.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
If the FVP fails to boot, the last 20 lines may just be a stack trace.
Show the last 200 lines for further context.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Set PV to 2.9.0+git instead of 2.9+git so the version comparisons are
reliable.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit remove meta-arm-image from the yml file and adds
necessary image configuration to meta-arm-bsp/recipes-bsp/images.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
- Removes upstreamed patches for optee-examples
- Fixes optee-examples installation
- Includes new python3-cryptography dependency
- Removes older cryptography backend dependencies
- Fixes python3-cryptography to work with openssl
- Keeps optee-client and optee-os v3.1.4 for corstone1000 compatibility
Tested on qemuarm64-secureboot via optee-examples and xtest -l 15
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alhe@linux.microsoft.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The use of pyasn1 was replaced with python3-cryptography in mcuboot
ebd050. This is part of mcuboot 1.3.1 onwards, and TF-M 1.5.0 uses
mcuboot 1.8.0.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Corstone500 and Corstone1000 use wic_nopt.bbclass. This commit creates
this class for Corstone500 and Corstone1000 in meta-arm classes to remove
the need for meta-arm-image repo.
Signed-off-by: Emekcan Aras emekcan.aras@arm.com
Signed-off-by: Jon Mason <jon.mason@arm.com>
To make it easier for users to test and evaluate the FVP, including
testing inbound network connections, enable the openssh SSH server by
default and map to port 8022 on the host.
Update fvp-baser-aemv8r64 documentation accordingly in new "Networking"
section.
Issue-Id: SCM-3881
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I88329731418e198e2ef5d3449bfb38fde5ae77bb
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit includes :
- Rebased and fixed N1SDP kernel 5.4 PCIe quirk patches to apply on 5.15
- Removed 5.10 kernel recipe for N1SDP
- Dropped RT kernel support, as it is no longer supported on N1SDP
Signed-off-by: Xueliang Zhong <xueliang.zhong@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Rui Miguel Silva
Ross Burton
Satish Kumar
Peter Hoyes
Ross Burton
Harry Moulton
Vishnu Banavath
Jon Mason
Emekcan Aras
Alejandro Enedino Hernandez Samaniego
Xueliang Zhong