The image wasn’t autoloading kernel modules even though
`KERNEL_MODULE_AUTOLOAD` populated `/etc/modules-load.d/`. In this
configuration `/etc/init.d/rcS` only executes runlevel scripts from
`/etc/rcS.d` (and `/etc/rc5.d`), and `modutils.sh` was also missing.
This change:
* Includes the loader by adding `modutils-initscripts` to
`CORE_IMAGE_EXTRA_INSTALL`.
* Enables SysV init by appending `sysvinit` to `DISTRO_FEATURES`,
ensuring the `S*` start links in `/etc/rcS.d` (and `/etc/rc5.d`)
call `/etc/init.d/modutils.sh start` during boot.
**Result:** entries in `/etc/modules-load.d/*.conf` now load
automatically at boot.
**Verification**
* Before: `lsmod` empty after boot; manual `modprobe` needed.
* After: `lsmod` shows target modules; `dmesg` contains module init logs.
Signed-off-by: Hugues KAMBA MPIANA <hugues.kambampiana@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
- Add 'CAPSULE_SELECTED_COMPONENTS' to enable filtering of firmware
components during capsule generation. Only components listed in
'CAPSULE_SELECTED_COMPONENTS' will be included in the final capsule
image.
- Introduce CAPSULE_EXTRA_ARGS to allow passing additional arguments.
'--capflag PersistAcrossReset' to retain capsule across reboots.
- Payload selection is now controlled via the KAS YAML configuration
(corstone1000-image-configuration.yml), allowing per-image control
over which firmware components are included.
- With the introduction of multiple payload support, 'CAPSULE_VERSION'
no longer represents the firmware version itself but is instead
used for naming the capsule and assigning a common version to all
payloads to simplify testing.
- Use EDK2 tool to switch from single FMP capsule generation to multiple
FMP capsules using a JSON-based configuration. This removes the need
for manually combining firmware images into a .nopt image.
- Remove legacy nopt image creation logic, as each firmware binary is
now handled individually. Components no longer need to be merged.
Deploy task was removed with nopt logic.
- Generate dummy.bin for EDK2 tool compatibility. EDK2 requires
at least one input file for each payload.
- Added dependency on to to ensure images are signed before capsule
generation.
- Add CAPSULE_LOWEST_SUPPORTED_VERSION to
corstone1000-image-configuration.yml.It in the same file where
the firmware version (FW_VERSION) is defined, ensuring a unified
location for version-related metadata. This value was chosen to
be equal to the firmware version to represent a downgrade
scenario (from version 6 to version 5) during testing.
- CAPSULE_HARDWARE_INSTANCE is set to "1" by default (instead of 0),
indicating the first hardware.
Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The external-system component was marked as a dependency for the
corstone1000-recovery image regardless of whether external-system was
requested or not. This ensures that is no longer the case.
Signed-off-by: Frazer Carsley <frazer.carsley@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Includes TS and PSA dependency for firmware image build.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add corstone1000-recovery-image image based on core-image-minimal
while disabling the testimage task which is irrelevant in case of
an initramfs bundle.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Currently, only the Corstone-1000 platform uses the capsule generation
class. Corstone-1000 uses U-Boot instead of EDK2. With this change,
the dependency on EDK2 was removed.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
install the external system binaries under /lib/firmware
The kernel's remoteproc subsystem expects the firmware file to be under /lib/firmware
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Currently, only the Corstone-1000 platform uses the capsule generation
class. Corstone-1000 uses U-Boot instead of EDK2. With this change,
the dependency on EDK2 was removed.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The 2 Corstone-1000 kas files files are updated following the
multiconfig changes. The pinned commits have been commented out and
the default branch changed to master to allow the file to build valid
images.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
