Upstream change 26d97acc71379ab6702fa54a23b6542a3f51779c changed the
IMAGE_LINK_NAME to have IMAGE_NAME_SUFFIX and breaks the automatic
finding of the image by name. Work around here until upstream fix can
be added.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Change u-boot and machine config to default to booting a compressed
initramfs. This allows for easier testing. A compressed image is
needed as the image is too big for the storage, and the error notifying
of such is vague.
Signed-off-by: Jon Mason <jon.mason@arm.com>
To setup juno to use either u-boot or edk2 in CI, abstract out the
relevant parts and setup the parts to allow for it to be done
dynamically.
Signed-off-by: Jon Mason <jon.mason@arm.com>
The default kernel is now 5.15, so remove the preferred version
assignment.
The mailbox patches went upstream in a different form, so we can drop
the patches and drop in a customised Devicetree file required to use the
new drivers.
In the future we can possibly drop the devicetree patch if it is provided
by firmware, but for now this is known to work.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
So that all possible combinations are built, add edk2-firmware to the
default image dependencies too.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Most BSPs don't need a specific release of TF-A, so add a bbappend for
TF-A 2.6 and remove the preferred version assignments.
Notable exceptions are TC0/TC1 and Corstone1000, which both are currently
using intermediate SHAs pre-2.6:
- TC0/TC1 fails to build with TF-A 2.6 as the binary doesn't fit in the
specific space.
- Corstone1000 patches need to be rebased on top of 2.6
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
There's no need to use virtual/trusted-firmware-a, as there's only one
provider of trusted-firmware-a: trusted-firmware-a.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update to TF-A v2.5 and MBED TLS 2.26, and all machines using 2.4 to the
newer version. Also, n1sdp was using an intermediary SHA, but is now
updated to the latest (which includes that intermediary SHA).
Change-Id: Ia5ec3cecf9090fd5f5da28efff4c1d6cce1efc19
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add new recipe for SCP version 2.8.0 and remove the old 2.7.0 recipe.
Change TC0 and N1SDP to use the latest tag, and not their previous
intermediate SHA (which are in the 2.8.0 release).
Change-Id: Id3f0af549790969ce6fd3b315f94177726f24d73
Signed-off-by: Jon Mason <jon.mason@arm.com>
Move scp-firmware version to 2.7 for juno platform
Change-Id: I7ff1132c1e6a6fee047a268da2d991f81074e672
Signed-off-by: Damodar Santhapuri <damodar.santhapuri@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Move trusted-firmware-a version to 2.4 for juno
Change-Id: Ib6e6e5537a7ecb2246d3f96b4beb8893cea605dc
Signed-off-by: Damodar Santhapuri <damodar.santhapuri@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Explicitly select scp-firmware 2.6 in all the machines that use it.
Change-Id: I83d3214fff05e7cbbf182f1215e67da42ceb68f1
Signed-off-by: Ross Burton <ross.burton@arm.com>
The u-boot 2020.07 temporary recipe is a copy of 2020.04, and brought
with it a limitation in the recipe to only be used on certain hardware.
Remove this limitation so that it can be used where needed.
Change-Id: I5b99e92f3f440812ebc1fc550e6b860e6530e9b7
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit includes
1. Move from linux-linaro-arm 4.9 to linux-yocto 5.4
2. MHU patches for SCMI
3. add patch to remove stale configs in v5.4
Observed the below error in kernel boot
[ 7.177114] arm-scmi firmware:scmi: mbox timed out in resp(caller: scmi_power_state_set+0x78/0xc0)
[ 7.197984] arm-scmi firmware:scmi: mbox timed out in resp(caller: scmi_power_state_set+0x78/0xc0)
[ 7.201125] smsc911x 18000000.ethernet eth1: SMSC911x/921x identified at 0xffff800012a70000, IRQ: 8
[ 7.206968] arm-scmi firmware:scmi: mbox timed out in resp(caller: scmi_power_state_set+0x78/0xc0)
[ 7.206978] arm-scmi firmware:scmi: mbox timed out in resp(caller: scmi_power_state_set+0x78/0xc0)
[ 7.216073] arm-scmi firmware:scmi: message for 5 is not expected!
Change-Id: I4651a142bcee06ba95faa315e3caaf871f406b5a
Signed-off-by: Damodar Santhapuri <damodar.santhapuri@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add basic recipes for TF-A versions 2.2 and 2.3. Also, rearrange fields
in the various TF-A recipes to make them uniform and move the
do_compile_prepend to the inc file.
Change-Id: I85e4ac7bdc44ed85449e40fd2c94d73bf3e7d9e8
Signed-off-by: Jon Mason <jon.mason@arm.com>
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Add the firmware-image-juno recipe to produce the Firmware Image for
Juno to be copied to the Configuration microSD card instead of the
trusted-firmware-a recipe.
Include the firmware-image-juno recipe in the EXTRA_IMAGEDEPENDS
only for juno MACHINE.
Change-Id: I316c70f22d57a3d85cc40386f1961ecd23edc865
Issue-Id: SCM-754 SCM-888
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Reviewed-By: Bertrand Marquis <bertrand.marquis@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Remove all variables, settings and operations specific to Xen from
meta-arm-bsp.
These implementations will be added later in another separate layer.
Change-Id: I971a6898f985f5ec7264da5ad5e4b6436067e3dd
Issue-Id: SCM-769
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
A user of the BSP layer may decide to use the machine
configuration but a different kernel.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Do not try to add distro features from juno machine definition.
Modify juno documentation to mention usbhost and usbgadget in case
someone use a distribution not activating them by default.
Change-Id: I7fc44c9921ce3fdbf069fd5354f37bb2ec38ac53
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
In order to have SCMi or HDMI support, the Juno BSP must use
the Linaro kernel instead of the standard Yocto one.
Change-Id: Ib53cb81a074439e9a4018bf356d749c7fd0a5d5a
Signed-off-by: Vineeth Raveendran <vineeth.raveendran@arm.com>
Exceptions will be cases involving overrides, machine specific
varible expansion and cases where variable modification needed to be
done after all += operations.
Change-Id: I7c76a77949d0a012238d488d5a75c489c54abf68
Signed-off-by: Vineeth Raveendran <vineeth.raveendran@arm.com>
Add Yocto support for Juno development board:
- add machine definition
- add kernel configuration
- add u-boot patch to get the environment from a file in flash
- add trusted firmware extension to produce a firmware image
- add ifupdown interfaces to start eth0 and eth1 on startup
Change-Id: I5046166cf1cc9e80a57815ef6bfb0cbb263a704e
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Jon Mason
Ross Burton
Damodar Santhapuri
Diego Sueiro
Daniel D?az
Bertrand Marquis
Vineeth Raveendran