Adding support for the new Arm corstone700 platform family.
The current supported corstone700 machine is corstone700-fvp.
The changes are as follows:
- Making some adjustments to the mmio timer and to the cortex-a5
designstart platform to share as much as possible between this
platforms.
- Disabling the use of the mmio_timer driver and enabling the
arch_timer driver.
The mmio_timer tries a direct access to the Armv8-A CNTFRQ generic timer
frequency register through memory mapping. This can not be done because
this register is only accessible through memory mapping under a secure
mode only. u-boot runs in non secure Hypervisor mode. To read the counter
frequency u-boot should use the mrc instruction to read the CNTFRQ system
register. The arch_timer driver reads the CNTFRQ register using the mrc
instruction.
- adding bootx command to start XiP images
Change-Id: I40f5e91cfb8865e2904b0f5ac9920df75705b593
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit allows the external-system firmware to be used on the
corstone700 platform.
Change-Id: I746a970dcdceee60d91152e4315afa072ca843d3
Signed-off-by: Rui Miguel Silva <rui.silva@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit adds support for trusted-firmware-a to the corstone700
platform.
The trusted-firmware-a runs on the host processor.
Change-Id: I70ae2715e640bf50c756229a734dcb663c2d8e4d
Signed-off-by: Rui Miguel Silva <rui.silva@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit enables kernel v5.6 for corstone700 and configures the kernel
using configuration fragments. The current available machine is
corstone700-fvp.
Change-Id: I43371f9ef0277e9bd82bc73c7911df5a99e5f59d
Signed-off-by: Rui Miguel Silva <rui.silva@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add recipe that allows building the external system firmware.
The external system is a Cortex-M3 platform provided by the partners
and intended to implement the sensor/realtime part of the IoT system.
Change-Id: I271eafcc90e44efb8090f8b2cc1c8acfd15eb929
Signed-off-by: Rui Miguel Silva <rui.silva@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This layer may want to ship older versions of software than oe-core for
some BSPs (such as u-boot), but we don't want to force those downgrades
on everyone else. Unfortunately because the meta-arm layers have
priority 6, any recipe in this layer wins over newer versions in oe-core:
for example with an older release of u-boot in meta-arm, simply adding
meta-arm to BBLAYERS will result in qemux86 downgrading u-boot.
Solve this by lowering meta-arm's priority to match oe-core, so that
recipes are treated equally and the usual version ordering applies.
Change-Id: I6de7a6b493e71b8b88862018b9fa35608342c1b2
Signed-off-by: Ross Burton <ross.burton@arm.com>
Using tag names in SRCREV means a network operation every build, and
loss of reproducible builds if the tag moves.
Change-Id: I583e723925314a4a36a9ac1b6c932dbcf99e7da4
Signed-off-by: Ross Burton <ross.burton@arm.com>
The trusted-firmware-m build doesn't use mbedtls (just mbed-crypto), so
don't fetch it.
Change-Id: Idc7fe211a8a667262a59d1e8106e486fb96498bd
Signed-off-by: Ross Burton <ross.burton@arm.com>
This is part of the test instrumentation that we don't currently build.
A future recipe or patch can enable this properly and ensure it is
tested.
Change-Id: I02584920b00085dfe4efbff166684c5717f6cdf5
Signed-off-by: Ross Burton <ross.burton@arm.com>
Move B up a level so the build tree is entirely separate from the source
tree.
Use [cleandirs] to ensure that B is present and empty when rebuilding,
and remove now redundant code.
Finally add some comments to explain why trying to use cmake.bbclass is
pointless.
Change-Id: Ic8ddc08c46b9e945023e0b0a6e4ca1a6294b726b
Signed-off-by: Ross Burton <ross.burton@arm.com>
Add cpio.gz to IMAGE_FSTYPES for compressed RAM filesystem support
Change-Id: Ia81563976069666f762492e56b1a706a4ee0c173
Signed-off-by: Prabin CA <prabin.ca@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
grub-mkimage is used make a bootable image of GRUB,
grub-efi dependency in added to conf file.
Change-Id: I3afde13902cf396c47fd3ddea01d09cafd2a996d
Signed-off-by: Prabin CA <prabin.ca@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
- Update linux-arm inc for including sgi575
- Add machine conf to add image dependency
for Linux components
Change-Id: I26c539793b73a3f4a31e40daa4272904a1751b3e
Signed-off-by: Prabin CA <prabin.ca@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
- Add bbappend recipe to build ARM-TF and UEFI firmware
for SGI575.
- Add machine conf to add image dependency
for ARM-TF components.
Change-Id: I1f9dcc8877aa929c50bffd0b437e8f51527f3d45
Signed-off-by: Prabin CA <prabin.ca@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
- Add bbappend recipe to build SCP and MCP firmware
for SGI575.
- Add machine conf to add image dependency
for SCP-firmware components
Change-Id: Ic888ee11178979e5ec068f85a5e0d7f2cabb7f5e
Signed-off-by: Prabin CA <prabin.ca@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
The mbedtls repository has had some branch/tag pruning so the tags we
were using are no longer on 'master'. Set the right branch name so the
fetch is successful.
Change-Id: I07dc7045cd7784b7e93e14c3a24721a22b79da8a
Signed-off-by: Ross Burton <ross.burton@arm.com>
It appears that the mbedtls team have moved the SHA which
meta-arm was using from master branch. It is still present
in mbedtls-2.16 branch so this is now used.
Change-Id: If24915b1a1dc889d55b359863943439c76f6ca85
Signed-off-by: Prabin CA <prabin.ca@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
- Remove scp-firmware-juno_19.06.bb
- Enable v2.6 support for juno
- Add juno machine specific to scp-firmware
- Use romfw_bypass as scp_bl1.bin
Change-Id: Ib3f92e170a4e5701f6c6d18695541eae763de464
Signed-off-by: Damodar Santhapuri <damodar.santhapuri@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Use the FW_INSTALL variable to select which firmware
binaries should be installed in the target.
Change-Id: I6bffa3db9adc27a5ee43b316a12a758c48acb43f
Signed-off-by: Damodar Santhapuri <damodar.santhapuri@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
When building musca s1 and b1, the many warnings are seen. As an
example:
NOTE: Multiple providers are available for virtual/kernel (linux-dummy, linux-linaro-arm, linux-mainline, linux-stable)
Consider defining a PREFERRED_PROVIDER entry to match virtual/kernel
NOTE: Multiple providers are available for runtime kernel-base (linux-linaro-arm, linux-mainline, linux-stable)
Consider defining a PREFERRED_RPROVIDER entry to match kernel-base
NOTE: Multiple providers are available for runtime kernel-image (linux-linaro-arm, linux-mainline, linux-stable)
Consider defining a PREFERRED_RPROVIDER entry to match kernel-image
NOTE: Multiple providers are available for runtime kernel-image-zimage (linux-linaro-arm, linux-mainline, linux-stable)
Consider defining a PREFERRED_RPROVIDER entry to match kernel-image-zimage
...
Add linux-dummy as the PREFERRED_PROVIDER to the musca inc file to
silence these.
Change-Id: I80eee816b51aa028f9f2ceb03ac137f9c5f8b461
Signed-off-by: Jon Mason <jon.mason@arm.com>
The current arm-none-eabi-gcc supports all the flags that oe-core uses,
so we can remove this.
Noticed because due to the override it wasn't actually being used.
Change-Id: I09aa8c5d427fa3877f9947a0508c36a4f060ae68
Signed-off-by: Ross Burton <ross.burton@arm.com>
Firmware is machine-specific, so set PACKAGE_ARCH.
Change-Id: Ib3247d04eaacd2b4240a1e11353f06ebd381a4c6
Signed-off-by: Ross Burton <ross.burton@arm.com>
This enables extra ttys that are required by sysvinit 2.96 used
in dunfell.
Change-Id: I4ee0d1a3ec98665fd19cb8022b66c53c3d559499
Signed-off-by: Usama Arif <usama.arif@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
The standard canned WKS files like mkefidisk.wks doesn't allow
us to set custom grub.cfg hence a new wks file is created on the
lines of mkefidisk.wks to accept custom grub.cfg as config parameter
to bootloader command.
The custom grub.cfg allows user to select from different boot options
(acpi, devicetree for single and multi chip).
IMAGE_BOOT_FILES is updated to package n1sdp dtbs for single and multi chip
as part of the final image.
Change-Id: I29a64d0bd50d72d912cdcd99dbc593388be786bb
Issue-Id: PLATFORMS-3134
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
N1SDP supports both single-chip and multi-chip environment.
- Updated SHA to latest TFA patchset to add support for both DTS files
- generate dtbs for both single and multi-chip environment
- Migrate N1SDP to use trusted-firmware-a version 2.3 as base line
Change-Id: I4b92e1680750041421fb9fbc9cef448250581f94
Issue-Id: PLATFORMS-3134
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Use the default one from trusted-firmware-a_2.3
Change-Id: I496db01818b172b109e8dab04e39a66bafd35a2d
Signed-off-by: Usama Arif <usama.arif@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
It appears that the mbedtls team have moved the SHA which
meta-arm was using from master branch. It is still present
in mbedtls-2.18 branch so this is now used.
Change-Id: Ie932f446067767e85a25583b1bdc02b4739e323f
Signed-off-by: Usama Arif <usama.arif@arm.com>
Signed-off-by: Prabin CA <prabin.ca@rm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Also refactor fvp-common.inc to contain definitions shared
between fvp-base, fvp-base-arm32 and foundation-armv8
Change-Id: I3634c3fefa8d793d0bcf5fcfd7458e6dbd2a6622
Signed-off-by: Anders Dellien <anders.dellien@arm.com>
Add trusted-firmware-a recipes for v1.5. While old, there are platforms
that are still using this older version.
Change-Id: Id40414ad58fd274af86203bb2c8d449e18a10c7a
Signed-off-by: Jon Mason <jon.mason@arm.com>
There's a rare build race where mk/conf.mk.tmp is written to before mk/
exists. Add an explicit mkdir so that this directory is sure to exist.
Change-Id: I4e907f395679da9354d386301e7bf5da46afdbaf
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Since gem5-arm64 machine implementation was moved from meta-arm-bsp to
meta-gem5, we need to move the specific machine settings to
meta-arm-autonomy/dynamic-layers/meta-gem5.
Change-Id: I773189e7e1ee2ca77e569dcec2d92ecfb93d3719
Issue-Id: SCM-1133
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add build-time dependencies to ensure the required components
(TFA, SCP, UEFI EDK2) are built and available before
the task to create wic image gets initiated.
Change-Id: I3789c8d1a44984a26d31ddd8ddd5d16f4d58c7d3
Issue-Id: PLATFORMS-3134
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
When XENGUEST_IMAGE_NETWORK_TYPE="nat", add the option to set NAT port
forward to have access to the guest from the external network.
The port forward is applied per guest by the 00-xenguest-nat-port-forward.hook
script which is called by /etc/xen/scripts/vif-post.d/00-vif-xenguest.hook.
The ports can be customised by the XENGUEST_IMAGE_HOST_PORT and
XENGUEST_IMAGE_GUEST_PORT variables.
Change-Id: I49492f5ac881fd3cc38838ce24d1d4160a4e65df
Issue-Id: SCM-1019
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Introduce the private/internal network support for xenguest by using NAT
and applying the proper iptables rules to allow the guest to have access
to the external network.
The XENGUEST_NETWORK_TYPE variable was introduced to allow the user to
setup the xenguest network type between "bridge" (default), "nat" and
"none".
Change-Id: I919e5b0fd0809093698b9dec3a9503b598b54828
Issue-Id: SCM-1019
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
To properly set the iptables rules to be applied when configuring the
network between the host and guest we need to have the netfilter.scc
kernel feature and following kernel extra kernel configs:
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
Change-Id: I6f3ff9e8db5d359efba5fb3ead04703f4f2ec88b
Issue-Id: SCM-1019
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch introduces two fixes for the vif-nat script:
1- Setting the hostname is failing because the "$XENBUS_PATH/domain"
doesn't exist anymore. To fix this we set it to dom$domid.
2- Copy temp files used to add/remove dhcpd configurations to avoid
replacing potential symlinks.
Change-Id: I5f2ed917c15bbe1c6ff9ec3cc9ad2fc4e1c0fb60
Issue-Id: SCM-1019
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
By default kernel defconfig is not enabled to support Realtek adapter driver
required to get ethernet working on N1SDP. This patch enables the CONFIG_R8169
to add the support.
Issue-Id: PLATFORMS-3134
Change-Id: I218ca8e0011db7f02329e103c1dea1350ccc3c28
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The kernel defconfig has removed enabling of CONFIG_EXTRA_FIRMWARE,
disabling the CONFIG_EXTRA_FIRMWARE isn't required.
Change-Id: I032b1aa7dd84c63f6aece5f24dbab43d14da278c
Issue-Id: PLATFORMS-3134
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This is 2.6.0, not 2.6.
Also bump the SRCREV to match N1 SDP so that the core code is the same,
that BSP uses a newer commit.
Change-Id: I83168aa5973d83e4d93869019d91c05daf1e71e9
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Instead of an arbitrary commit, set the base recipe to build the 2.6.0
release.
Change-Id: Iec78c6ed903edfd020cca1222770d8ec018ae78a
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This doesn't care what specific version is being appended, so use a
wildcard.
Change-Id: I5e3a46c42616f8dfa62a20549c03b60e24fe8b20
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This repository is no longer fetched explicitly by bitbake so remove the SRCREVs.
Change-Id: I2de11d354f1f708de941485d5cc4463d53e6018e
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Abdellatif El Khlifi
Rui Miguel Silva
Ross Burton
Prabin CA
Damodar Santhapuri
Jon Mason
Usama Arif
Khasim Syed Mohammed
Anders Dellien
Diego Sueiro