Set TEST_TARGET so that all FVP machines use the new FVP target out of
the box, instead of attempting to use qemu.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
All FVPs can use virtio networking devices, so enable virtio in all of
the FVP kernels.
Remove our fvp/fvp-virtio.cfg as there's cfg/virtio.scc we can use.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch adds config parameters to support virtio_net user networking by
default fvp-baser-aemv8r64 and updates the documentation to remove the old
instructions about setting up tap networking.
Issue-Id: SCM-3536
Signed-off-by: Hugo L'Hostis <hugo.lhostis@arm.com>
Change-Id: I4f3b74c5ba8b8e0b4205fca643a35affbe50a18c
Signed-off-by: Jon Mason <jon.mason@arm.com>
Updating the linux kernel version to 5.14 for fvp-baser-aemv8r64.
Signed-off-by: Hugo L'Hostis <hugo.lhostis@arm.com>
Change-Id: Iad76939460a32d8e34212e86a45905ffd51deb60
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch adds instructions to fetch and build previous versions of the
software stack for fvp-baser-aemv8r64 instead of the ongoing
development.
Signed-off-by: Hugo L'Hostis <hugo.lhostis@arm.com>
Change-Id: I430196c0ca80c7f1e4b9f8349cdc957c86f384ee
Signed-off-by: Jon Mason <jon.mason@arm.com>
Enable user-mode networking with virtio out of the box. This way port
forwarding can be configured easily without needing to setup host tap
ports.
Moving forward this may be controlled more by runfvp with the machine
configuration simply saying what configuration parameter to use (in this
case, bp.virtio_net), but this is a good starting point to iterate from.
Change-Id: I0b610df87c7dd2c8e3e213daaa967618babbdc7c
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Pass bp.ve_sysregs.exit_on_shutdown=1 so that the FVP exits if the
emulated machine shutsdown, which is typically the desired behaviour.
Change-Id: Id2f92df4af67ca5cadc645948eccf9c93af3f8f9
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
By removing the verbose and debug kernel command line parameters from the grub
menu entries we prevent the console printing unnecessary messages and slowing
down the boot process.
Issue-Id: SCM-3027
Signed-off-by: Hugo L'Hostis <hugo.lhostis@arm.com>
Change-Id: Ieb68c606b7ed5b20191f6989aea84963b8cda778
Signed-off-by: Jon Mason <jon.mason@arm.com>
This pins the rt kernel to the same version as the standard kernel.
Poky has recently upgraded to 5.13, which has not yet been validated
on the n1sdp.
Issue-Id: SCM-2987
Signed-off-by: Kamil Dziezyk <kamil.dziezyk@arm.com>
Change-Id: Ie53c27e46f529f5e5dc5a6a6b32d2c021ca22651
Signed-off-by: Jon Mason <jon.mason@arm.com>
Android has deprecated ION and moved to dmabuf instead.
Update the kernel configuration accordingly.
Also, enable "CONFIG_DEVFREQ_THERMAL" as this is required by
the GPU libraries
Signed-off-by: Anders Dellien <anders.dellien@arm.com>
Change-Id: I7ee3659792984f71cf818ef175d7e5ecc25c6d93
This pins the rt kernel to the same version as the standard kernel.
Poky has recently upgraded to 5.13, which has not yet been validated
on the fvp-baser-aemv8r64.
Issue-Id: SCM-2987
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Id7cd02bb9610d82adbe590777517649596d32172
Signed-off-by: Hugo L'Hostis <hugo.lhostis@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This makes them common with TC1 and also adds support for FFA v1.1.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
* change Changelog to Change Log.
* change armv8r64 to Armv8-R64.
* ensure all log entries have a period.
* change the order of the entires to highlight key release features.
Issue-Id: SCM-2987
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Id77ec01c455ac8954a965af8659421cc485e4778
Signed-off-by: Jon Mason <jon.mason@arm.com>
* Add missing net-tools to apt-get install list
* Use export to set FVP_BASE_R_AEM_TARBALL_URI and
FVP_BASE_R_AEM_EULA_ACCEPT and make kas build its own command.
* Change bp.hostbridge.interfaceName=tap0 to
bp.virtio_net.hostbridge.interfaceName=ta0 for runfvp, so that the
FVP can access the external network.
Issue-Id: SCM-2987
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: If9052400d2ae199861bc00ce119d28069f476f7e
Signed-off-by: Jon Mason <jon.mason@arm.com>
The wording implied they were limitations of the architecture, so
rewrite to make clear they are software restrictions.
Issue-Id: SCM-2987
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I79ca1ac7cdce709015de1c539a6ec7fe1650d384
Signed-off-by: Jon Mason <jon.mason@arm.com>
The base version is 2.8.0, so these should be 2.8.0+git.
Change-Id: Ief7c3176e46f6ec8b4549375f9be776a7ffbd4d7
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Temporary hack to allow for things to continue to work, while waiting
for the platforms to migrate to a newer kernel.
Signed-off-by: Jon Mason <jon.mason@arm.com>
The Linux kernel entries for corstone700 are not much more than any
other BSP. Migrate them to the common file for easier development and
debugging.
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch was upstreamed in 5.10.54.
Change-Id: Iacf6345c4d4ffa8e512e2f812876fdd50a057f96
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add support for all of the Cortex-R CPUs currently supported in GCC.
Having to get creative here to properly use the GCC extensions.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add information about PSCI support as well as known issues and limitations.
Also, update the fvp-baser-aemv8r64 kas config file to fetch the layers under
the layers directory and pin poky to a stable build revision.
Issue-Id: SCM-2989
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Change-Id: I8e2b30ba708f6ff7fdf43f29eede0e65aa3685ca
Signed-off-by: Jon Mason <jon.mason@arm.com>
The same patches are used by tc0 and tc1. Hence rename the folders
that contain the Total Compute patches to be called "tc". The
artifacts image is used by both tc0 and tc1, hence renamed to
tc-artifacts-image.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: Ib0b4fbca9a009c432c1e6696c5437a7d24a25d1f
Signed-off-by: Jon Mason <jon.mason@arm.com>
No testing is being done against older branches. Only have the
compatibility set to honister to prevent any issues.
Signed-off-by: Jon Mason <jon.mason@arm.com>
sgi575 already has the defconfig entry in the include file. Remove the
redundant entry from the machine config file.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Using recipes-kernel/linux/linux-yocto_5.4.bb as a guide, format the
kernel recipes to match. This enables easier diffing and updating.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Correct an override syntax issue with the kernel and move the relevant
kernel entries from the machine config to the kernel include file to
match the other machines in meta-arm-bsp
Signed-off-by: Jon Mason <jon.mason@arm.com>
Recent changes in the 5.4 kernel are preventing the juno patches from
applying. Temporarily pin the kernel to the version prior to this until
the patches can be rebased.
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch adds a device tree entry and kernel configs to enable file
sharing between the host and the FVP using the virtio P9 device
component.
Issue-Id: SCM-2299
Signed-off-by: Hugo L'Hostis <hugo.lhostis@arm.com>
Change-Id: Icd757e3c6281e5e84985a3caac72e860a4aeee7f
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch adds support for runfvp to fvp-base-r:
- Add necessary parameter to the fvp-baser-aemv8r64.conf
- Add fvp-base-r-aem bb file
- Add kas support
Issue-Id: SCM-2953
Signed-off-by: Hugo L'Hostis <hugo.lhostis@arm.com>
Change-Id: I252b445297f2d61a90e3cd8f0ec1816890cf733b
Signed-off-by: Jon Mason <jon.mason@arm.com>
This SHA contains fix for SVE and AMU extension
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Iefa3e8f9bee41098ea49304d88dc04df74ddcb9c
Signed-off-by: Jon Mason <jon.mason@arm.com>
This SHA contains fix for IRQn type conversion issues
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: I10cc4729df3e12c549413f40d390c24f318c4577
Signed-off-by: Jon Mason <jon.mason@arm.com>
This includes the initial version of ffa driver and optee driver
support for FF-A to ACK 5.10
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: I8a2c6d0e26422bd2183f3c1f370b0c08eeba7c1e
Signed-off-by: Jon Mason <jon.mason@arm.com>
Set Shared Peripheral Interrupts (SPIs) for PMUIRQ so that profiling
tools (such as perf) can use PMU events.
Issue-Id: SCM-3164
Signed-off-by: Qi Feng <qi.feng@arm.com>
Change-Id: Idcfee3f33d9f9e15578405dd39be4f434f3faa06
Signed-off-by: Jon Mason <jon.mason@arm.com>
fvp-baser-aemv8r64.wks is identical to fvp-base.wks, so just reuse it.
Change-Id: Ib7db425b35cfd68494beb167fe167c46cdd32b3d
Signed-off-by: Ross Burton <ross.burton@arm.com>
Ross Burton
Hugo L'Hostis
Kamil Dziezyk
Anders Dellien
Peter Hoyes
Usama Arif
Jon Mason
Diego Sueiro
Arunachalam Ganapathy
Qi Feng
Ross Burton