meta-arm/meta-arm-autonomy/classes/xenguest-image.bbclass

# This class must be used to create, extend or pack a xenguest image.
# It is using xenguest-mkimage tool to do operations

DEPENDS += "xenguest-mkimage-native"

#
# Xenguest image parameters
# All the following parameters can be modified in local.conf or on recipes
# inheriting this class
#

# Guest memory size in MB
XENGUEST_IMAGE_MEMORY_SIZE ??= "512"

# Guest number of vcpus
XENGUEST_IMAGE_NUM_VCPUS ??= "1"

# Guest auto boot during init, set to 1 to have guest started during init or
# to 0 if the guest should not be auto started
XENGUEST_IMAGE_AUTOBOOT ??= "1"

# Partition containing the root file system
# Xen will actually add root=${XENGUEST_IMAGE_ROOT} to your guest kernel
# command line
# You can let this empty if the root filesystem is specified in an other way
# and have root= option added to the command line for example or if you don't
# need a root filesystem mounted for your guest (initrd for example)
XENGUEST_IMAGE_ROOT ??= "/dev/xvda1"

# Guest kernel command line arguments
XENGUEST_IMAGE_CMDLINE ??= "earlyprintk=xenboot console=hvc0 rw"

# Extra commands to add to xenguest-image when creating the image
XENGUEST_IMAGE_EXTRA_CMD ??= ""

# Kernel binary
# This value is used by the xenguest image type but is declared here to have
# all variables in the same place
# If this value is empty no kernel will be added to the image
XENGUEST_IMAGE_KERNEL ??= "Image"

# Size of the disk to create (if 0 no disk will be created and rootfs will not
# be included in the xenguest image)
XENGUEST_IMAGE_DISK_SIZE ??= "${@ '4' if not d.getVar('INITRAMFS_IMAGE') else '0'}"

#
# XENGUEST_IMAGE_DISK PARTITIONS is used to describe the partitions to setup
# and their content.
# It must be set to a space separated list of entries with each entry having
# the format num:sz:fs:[file] where:
# - num is a partition number
# - sz is the partition size in Gigabit
# - fs is the filesystem to use for the partition
# - file is optionally pointing to a file to use as content of the partition
#   Please check image_types_xenguest.bbclass for rootfs handling of files
#
# Default value creates a partition 1 using the full disk, formated with ext4
# and containing the root filesystem produced by Yocto
XENGUEST_IMAGE_DISK_PARTITIONS ??= "1:${XENGUEST_IMAGE_DISK_SIZE}:ext4:rootfs.tar.gz"

# XENGUEST_IMAGE_NETWORK_BRIDGE can be set to 1 to have a network interface
# on the guest connected to host bridged network. This will provide the guest
# with a network interface connected directly to the external network
XENGUEST_IMAGE_NETWORK_BRIDGE ??= "1"

# Sub-directory in wich the guest is created. This is create in deploy as a
# subdirectory and must be coherent between all components using this class so
# it must only be modified from local.conf if needed
XENGUEST_IMAGE_DEPLOY_SUBDIR ?= "xenguest"

# Directory in which the xenguest should be deployed
# a sub-directory named ${XENGUEST_IMAGE_DEPLOY_SUBDIR} will be created there.
# This should be set to:
# - ${DEPLOYDIR} (default) if creating or extending the xenguest for a normal
#   recipe.
# - something in ${WORKDIR} if you need to clone and manipulate an image
XENGUEST_IMAGE_DEPLOY_DIR ??= "${DEPLOYDIR}"

#
# Wrapper to call xenguest-mkimage
# It is using XENGUEST_IMAGE_DEPLOY_DIR and XENGUEST_IMAGE_DEPLOY_SUBDIR
# to find the image to operate on
#
# Usage: call_xenguest_mkimage [operation] [args]
call_xenguest_mkimage() {
    local cmd="${1}"
    local img="${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}"
    shift

    echo "xenguest-mkimage $cmd $img $@"
    xenguest-mkimage $cmd $img $@
}

#
# Create an initial xenguest image.
# This is a task which must be added in a recipe inheriting deploy
# It is using XENGUEST_IMAGE_MEMORY_SIZE, XENGUEST_IMAGE_NUM_VCPUS,
#  XENGUEST_IMAGE_AUTOBOOT, XENGUEST_IMAGE_ROOT, XENGUEST_IMAGE_EXTRA_CMD,
#  XENGUEST_IMAGE_CMDLINE, XENGUEST_IMAGE_DISK_SIZE and
#  XENGUEST_IMAGE_DISK_PARTITIONS to customize the initial guest
#
xenguest_image_create() {
    if [ -z "${XENGUEST_IMAGE_DEPLOY_DIR}" -o \
        -z "${XENGUEST_IMAGE_DEPLOY_SUBDIR}" ]; then
        die "Configuration error: XENGUEST_IMAGE_DEPLOY_DIR or XENGUEST_IMAGE_DEPLOY_SUBDIR is empty"
    fi

    rm -rf ${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}

    mkdir -p ${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}

    # Create the image
    call_xenguest_mkimage create --xen-memory=${XENGUEST_IMAGE_MEMORY_SIZE} \
        --xen-vcpus=${XENGUEST_IMAGE_NUM_VCPUS} \
        --xen-root=${XENGUEST_IMAGE_ROOT} \
        ${XENGUEST_IMAGE_EXTRA_CMD}

    # add command line
    if [ -n "${XENGUEST_IMAGE_CMDLINE}" ]; then
        call_xenguest_mkimage update --xen-clean-extra
        for arg in ${XENGUEST_IMAGE_CMDLINE}; do
            call_xenguest_mkimage update --xen-extra=$arg
        done
    fi

    # create disk if needed
    disksize="${XENGUEST_IMAGE_DISK_SIZE}"
    if [ -z "$disksize" ]; then
        disksize="0"
    fi
    if [ $disksize -gt 0 ]; then
        # setup disk size
        call_xenguest_mkimage update --disk-reset-config --disk-size=$disksize

        diskparts="${XENGUEST_IMAGE_DISK_PARTITIONS}"
        if [ -n "$diskparts" ]; then
            for arg in $diskparts; do
                call_xenguest_mkimage update --disk-add-part=$arg
                partnum="$(expr $partnum + 1)"
            done
        fi
    fi

    if [ "${XENGUEST_IMAGE_AUTOBOOT}" = "1" ]; then
        call_xenguest_mkimage update --set-param=GUEST_AUTOBOOT=1
    else
        call_xenguest_mkimage update --set-param=GUEST_AUTOBOOT=0
    fi

    if [ "${XENGUEST_IMAGE_NETWORK_BRIDGE}" = "1" ]; then
        call_xenguest_mkimage update --set-param=NETWORK_BRIDGE=1
    else
        call_xenguest_mkimage update --set-param=NETWORK_BRIDGE=0
    fi
}

#
# Clone the current xenguest from deploy to manipulate it locally
# This is required if you need to change things before packing an image
# To set the local directory where to clone you must set
# XENGUEST_IMAGE_DEPLOY_DIR if you don't want to use do_deploy to modify the
# image
#
xenguest_image_clone() {
    if [ -z "${XENGUEST_IMAGE_DEPLOY_DIR}" -o \
        -z "${XENGUEST_IMAGE_DEPLOY_SUBDIR}" ]; then
        die "Configuration error: XENGUEST_IMAGE_DEPLOY_DIR or XENGUEST_IMAGE_DEPLOY_SUBDIR is empty"
    fi

    if [ ! -f ${DEPLOY_DIR_IMAGE}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}/guest.cfg ]; then
        die "xenguest-image: ${DEPLOY_DIR_IMAGE}/${XENGUEST_IMAGE_DEPLOY_SUBDIR} does not contain a valid guest"
    fi

    rm -rf ${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}
    mkdir -p ${XENGUEST_IMAGE_DEPLOY_DIR}
    cp -rf ${DEPLOY_DIR_IMAGE}/${XENGUEST_IMAGE_DEPLOY_SUBDIR} \
        ${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}
}

# Helper function to retrieve rootfs file if present in one partition
# This can return an empty string or rootfs.tar[.COMP]
def xenguest_image_rootfs_file(d):
    disksize = d.getVar('XENGUEST_IMAGE_DISK_SIZE')
    # if disksize is 0, we don't create anything
    if not disksize or disksize == '0':
        return ""
    # Find first partition with file=rootfs.tar*
    partlist = d.getVar('XENGUEST_IMAGE_DISK_PARTITIONS')
    if partlist:
        for partdesc in partlist.split():
            partelems = partdesc.split(':', 3)
            if partelems[3]:
                if partelems[3].startswith('rootfs.tar'):
                    return partelems[3]
    return ""