* without it, do_configure fails:
| Checking for 'x11' : not found
| The configuration failed
* inherit distro_features_check
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This extends the dependencies on pointer.h to fix following error:
| ./sysinfo.sh arm-poky-linux-gnueabi-gcc ...
| In file included from misc.h:36:0,
| from misc.c:23:
| nmglobal.h:29:21: fatal error: pointer.h: No such file or directory
| #include "pointer.h"
| ^
| compilation terminated.
| make: *** [misc.o] Error 1
| make: *** Waiting for unfinished jobs....
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This fixes the Makefile so the client.txt file is copied from the
original source tree. This fixes the out of tree build error.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* Update recipe:
- update SRCREV to latest release, 2.18
- switch back to master branch
- increase verbosity (pass V=1 to EXTRA_OEMAKE) to make debugging easier
* Drop patches:
- fix-lib64-can-not-be-shiped-in-64bit-target.patch
replaced by LIBARGS definition. the build system allows to override libdir
using LIB32 and LIB64 variables
- 0001-install-perl-lib-to-directory-perl-instead-of-perl5.patch
replaced by a one-liner to fixup perl module directory hardcoded to perl5
* Refresh skip-checking-LIB32-and-LIB64-if-they-point-to-the-s.patch
- only disable the error to skip the check
* Add patches:
- 0001-aarch64-fix-cross-compilation.patch - submitted upstream
allow to override CC and use it for aarch64 case like the other arch
- 0001-aarch64-fix-page-size-not-properly-computed.patch - submitted upstream
fix typo on MB variable (MB -> $MB) and add the missing linker variants
(aarch64elfb, aarch64linux, aarch64linuxb)
- 0001-replace-lib-lib64-hardcoded-values-by-LIBDIR32-LIBDI.patch
submitted upstream. replace lib/lib64 hardcoded values by LIBDIR32 and
LIBDIR64 variables
* Remove patches that aren't applied in the recipe (they're all merged
upstream and available in 2.18 release):
- libhugetlbfs/files/aarch64-support.patch
- aarch64-unit-test-fixes.patch
- add-PROT-NONE-to-the-mprotest-test.patch
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Changes:
- use BPN to fix multilib builds
- drop the fileop-arm.patch since the issue is already
fixed in the new version.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Changes:
* use BPN in the file name in SRC_URI.
* install binaries in bindir and sbindir instead of base_bindir and base_sbindir.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This version provides better ethernet performance
Patch is required for man page portion of build
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Changes:
- rename SUMMARY with length > 80 to DESCRIPTION
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Fix the below QA warning when building 64bit target:
| WARNING: QA Issue: lmbench: Files/directories were installed but not
| shipped
| /usr/lib
| /usr/lib/libmbench.a
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The 'config' script which gets run returns '../scripts/CONFIG.<machine>', so
the current value was '${datadir}/lmbench/../scripts/CONFIG.<machine>', which
is obviously not ideal. Remove the $SHAREDIR prefix, as the relative path will
work from the scripts dir where lmbench-run runs. With this, we can install
a custom CONFIG.qemux86 into ${datadir}/lmbench/scripts/, for example.
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
/opt should never be used for packages built by OE, so install the tests in a more standard location.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
*libhugetlbfs depends on perl, and perl installs a directory 'perl'
and make a symlink 'perl5' to it. So just install perl libs in
libhugetlbfs to directory 'perl' instead of 'perl5'. This can avoid
the following error:
| CalledProcessError: Command 'tar -cf - -C .../perl/5.14.3-r1/sysroot-destdir
| -ps . | tar -xf - -C .../tmp/sysroots/t4240qds'
| returned non-zero exit status 2 with output
| tar: ./usr/lib/perl5: Cannot create symlink to `perl': File exists
| tar: Exiting with failure status due to previous errors
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
*Hard coded path makes the script impossible to run out of source tree.
*After 'make install', we can use hugeadm utility under DESTDIR.
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
*TESTS_64 is empty, install will fail due to missing file operand.
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Running systemd-tmpfiles --update without specifying a configuration
file results in all tmpfiles.d configuration files being processed.
/usr/lib/tmpfiles.d/systemd.conf creates /run/nologin on boot to
prevent non-root users from logging in while the system is booting.
If systemd-tmpfiles --update is run after the system has started,
it will still create /run/nologin which would prevent non-root users
from logging in with the message "System is booting up.".
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Create /run/lmbench on startup using populate-volatiles.sh and
tmpfiles.d for systemd.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add a recipe for glmark2, which is an OpenGL 2.0 / OpenGL ES 2.0 benchmark.
Signed-off-by: Diego Rondini <diego.ml@zoho.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* This change is only aesthetic (unlike indentation in Python
tasks).
* Some recipes were using tabs.
* Some were using 8 spaces.
* Some were using mix or different number of spaces.
* Make them consistently use 4 spaces everywhere.
* Yocto styleguide advises to use tabs (but the only reason to keep
tabs is the need to update a lot of recipes). Lately this advice
was also merged into the styleguide on the OE wiki.
* Using 4 spaces in both types of tasks is better because it's less
error prone when someone is not sure if e.g.
do_generate_toolchain_file() is Python or shell task and also allows
to highlight every tab used in .bb, .inc, .bbappend, .bbclass as
potentially bad (shouldn't be used for indenting of multiline
variable assignments and cannot be used for Python tasks).
* Don't indent closing quote on multiline variables
we're quite inconsistent wheater it's first character on line
under opening quote or under first non-whitespace character in
previous line.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
*fix bug that can not find CONFIG file
|error: run ./results|./results: line 15: .: CONFIG.p2041rdb: file not found
* update CONFIG file path
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* fixes:
lmbench-3.0-a9: lmbench: Files/directories were installed but not shipped
/usr/man
/usr/lib/lmbench
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
glibc 2.16 added aligned allocation support to stdlib and those
function clashes with the local implementation done in tiobench. We
fix it using a '_' prefix on those.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
* The package were not versioning the sources as the files had no
version on its name. We workaround it mangling the DL_DIR;
* We now dynamically check if the machine has or not neon feature and
set COMPATIBLE_MACHINE.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
* Import the nbench-byte recipe from the oe-classic git repo at
git://git.openembedded.org/openembedded commit id:
* 6fe7cef27069415f2eba36bc640cf59013d4979b
* Update LICENSE checksums
* Tested on an AM335x EVM which is the same processor as the
beaglebone.
* Original Author:
* Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
* Modifications by:
* Koen Kooi <koen@openembedded.org>
* Martin Jansa <Martin.Jansa@gmail.com>
* Chris Larson <chris_larson@mentor.com>
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
This is an import of memtester from OE classic,
commit ID: 5671855bfba71575e4919c4b5fc9c5dcb8052612
Fixes to recipe:
* Added patch header to Makefile.patch
* Corrected order of variables and added HOMEPAGE to recipe
* Removed the line, S = "${WORKDIR}/memtester-${PV}" as its the default
* Removed new-line at end of recipe
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
* Imported from oe.dev commit id 0ff10ecb88de73074ae4857046643cef15dc4e97 and c10c33f86903c93611023197a7f812459c2dfe2d.
* Combined .inc and bb file from oe.dev and made a single bb file.
* Removed EXTRA_OECONF_append_epia = " --disable-threads" while importing as this should go in epia layer.
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Martin Jansa
Otavio Salvador
Lauren Post
Fathi Boudra
Khem Raj
Jackie Huang
Matthieu CRAPET
Koen Kooi
Ting Liu
Christopher Larson
Chunrong Guo
Jonathan Liu
Diego Rondini
Paul Eggleton
Christopher Larson
Koen Kooi
Zhenhua Luo
Tom Rini
chase maupin
Joel A Fernandes
Noor Ahsan