When the host system provides pcap-config, the configure scripts
detect that and add a bogous CPPFLAG:
checking for pcap-config... /usr/bin/pcap-config
checking if we want to build with libpcap support... yes, pcap-config
...
PCAP_CPPFLAGS = -I/usr/include
Which down the line can lead to compile errors due to wrong headers
being included. Fix this issue by using --with-pcap-config=no which
prevents detection using pcap-config but does "guessing", which works
fine for OE.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
This solves the following warning:
WARNING: QA Issue: squid rdepends on libnetfilter-conntrack, but it isn't a
build dependency? [build-deps]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. Fix radvd.service to start daemon correctly.
2. Make the daemon run under 'radvd' user by default.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
make write_behind to return 0 if a empty file is written, to
distinguish a true writing failure[on which the write_behind
will return -1], then the annoying wrong log will disappear.
____
|Error code 3: Disk full or allocation exceeded
-----
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This reverts commit b2eb21a5fbcb065e84ed582e87de21bdc3082f00.
It make 3d8520a0b411[tftp-hpa: add error check for disk filled up]
unable to work
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
postfix 2.11.1 adds overriding config check. In postinstall script, it
calls command newaliases to read configure file main.cf_2.0.
config_directory is set in config main.cf_2.0, but it is an overriding
config and warning shows when build an image:
WARNING: log_check: There is a warn message in the logfile
WARNING: log_check: Matched keyword: [warn]
WARNING: log_check: newaliases: warning:
/buildarea3/kkang/poky/qemuarm-build/tmp/work/qemuarm-poky-linux-gnueabi/core-
image-minimal/1.0-r0/rootfs/etc/postfix/main.cf, line 27: overriding
earlier entry: config_directory=/buildarea3/kkang/
poky/qemuarm-build/tmp/work/qemuarm-poky-linux-gnueabi/core-image-minimal/1.0-r0/rootfs/etc/postfix
Remove config_directory setting in main.cf_2.0 to avoid this warning.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Fix pkg_postinst to not exit if "$D" is not empty.
Otherwise, postinsts from update-rc.d.bbclass would not run and the
symlinks under /etc/rc?.d/ would not be created.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The package provides the server daemon for the iSCSI protocol, as
well as the utility programs used to manage it. iSCSI is a protocol
for distributed disk access using SCSI commands sent over Internet
Protocol networks
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add systemd service for for radvd.
The unit is disabled by default, just as Fedora20 does.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
With the feature that checking the disk filled up, the return value of
function write_behind was checked and used to detect the disk status.
While for empty file, without data being written, this function will
return -1 thus the disk filled up error was miss-raised. Fix it.
Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add a little processing to find correct directory
for source upstream.
Update LIC_FILES_CHKSUM since the latest package
doesn't include a COPYRIGHT file anymore.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1. Uprev it to 5.1.0, add remove the unneed patches
2. fix a building failure since not include stdarg.h
3. using pkg-config to check xml and krb5
4. force STRIP to empty to not strip the file
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
WARNING: QA Issue: vsftpd: Files/directories were installed but not shipped
/run
/run/vsftpd
/run/vsftpd/empty
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Postfix is Wietse Venema's mail server that started life at IBM
research as an alternative to the widely-used Sendmail program.
Postfix attempts to be fast, easy to administer, and secure.
The outside has a definite Sendmail-ish flavor, but the inside
is completely different.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
AR is defined as "ar cq" in MCONFIG.in, then "cq" is no longer needed in
Makefile of common and libs subdir.
#grep AR MCONFIG.in
AR = ar cq
#
#grep AR common/Makefile
$(AR) $(LIB) $(OBJS)
#
But MCONFIG maybe not able to be generated by MCONFIG.in, common/Makefile
allows this condition [Note the - before include]
#grep MCONFIG common/Makefile
-include ../MCONFIG
#
then AR from building environment is used, but it not included the parameter
"cq", and lead to below error, so add the "cq" to AR to fix this issue.
i586-wrs-linux-ar libcommon.a tftpsubs.
i586-wrs-linux-ar: two different operation options specified
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* These recipes all use pkg-config in some way but were missing
dependencies on the tool, this patch adds them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
In ascii mode, if the CR and LF was separated into different transfer
blocks, This LF will be just dropped instead of replacing the previous
CR. Add a checking on the first character to fix it.
Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
It needs autotools-brokensep, otherwise do_install error:
install: cannot stat `vblade-20/vblade': No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
It needs autotools-brokensep, otherwise do_install error:
make: *** No rule to make target `install'. Stop.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Otherwise do_configure failed:
sed: can't read configure.in: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
It needs autotools-brokensep, otherwise do_configure error:
sed: can't read sasldb/db_berkeley.c: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
It needs autotools-brokensep, otherwise do_compile error:
proftpd-1.3.4b/include/version.h:1:24: fatal error: buildstamp.h: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* when sysv script is removed QA warn is shown:
atftp-0.7.1+gitAUTOINC+be3291a18c: atftp: Files/directories were installed but not shipped
/etc
empty dir doesn't cost much, so just include it
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
When run 'service radvd stop' in case radvd is not started/running,
we'll get warnings like this:
Stopping radvd: no /usr/sbin/radvd found; none killed
/etc/init.d/radvd: warning: cannot restore settings
radvd.
We could by pass these OPs by just check if the service is running
or not so eliminate possible warnings.
Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Changes:
- rename SUMMARY with length > 80 to DESCRIPTION
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Update radvd to version 1.9.8
* remove change-scanner-dependency.patch which is merged
* add 'status' subcommand for radvd.init
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Use /bin/false as the login shell, just like what Ubuntu does,
otherwise there might be secure issue; add /var/lib/ftp as user
ftp home-dir.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
When ntpd starts, it will create a daemon to connect this invalid server,
and fail, then ntpd will create other daemon to connect the local-only
(127.127.1.0) server.
The users should be aware that they need to configure the correct ntp
servers, a invalid server will lead to a redundant daemon, so it is better
to comment this example server to wait user to configure
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
/var/run/ is more suitable to store pidfile for OE, and this fixes
"/etc/init.d/proftpd stop" failure too, since this script assumes
the pidfile is under /var/run
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Proftpd is meant to be a system user, not a normal user of the
system so lets pass the correct parameters to the system.
Just add --system param when creating ftp group.
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
If we build a project without systemd support on a system that has systemd
enabled, the following QA items get flagged:
/lib
/lib/systemd
/lib/systemd/system
/lib/systemd/system/autofs.service
Trying to keep the solution to the problem as contained as possible in a
way that may be accepted up-stream by adding an optional parameter to the
--with-systemd flag.
Signed-off-by: Joe MacDonald <joe@deserted.net>
* Remove all PR = "r0" from all .bb files in meta-oe repo. This was done
with the command sed -e '/^PR.*=.*r0\"/d' meta*/recipes*/*/*.bb -i
* We've switching to the PR server, PR bumps are no longer needed and
this saves people either accidentally bumping them or forgetting to
remove the lines (r0 is the default anyway).
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
`/etc/init.d/populate-volatile.sh update' only needs to run in case
of an on-target installation. And it should have a prerequisite that
the script is executable.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
saslpasswd2 is used by an administrator to set a user's sasl password,
setting a default one in pkg_postinst in not only unnecessary but also
inappropriate.
Besides, running saslpasswd2 takes a significant amount of time to finish,
so this pkg_postinst will make the first boot take longer time.
According to the above two reasons, the patch remove the pkg_postint.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
While making use of the cyrus-sasl library an external application
will most likely include sasl.h which will cause compilation failures
if steps haven't been taken to define size_t. This should not be the
responsibility of the application building against the sasl library
but rather handled already in sasl.h. Here we ensure sasl.h has the
proper includes to have size_t defined before it is used.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
The tftp-hpa package installs /var/lib/tftpboot and tftpd-hpa is
configured to use that directory, but the default points at /svc/tftpboot.
Correct that so the default points to a location that exists when the
package is installed.
Signed-off-by: Joe MacDonald <joe@deserted.net>
If ${D}/run doesn't exist, the following statement will have non-zero
exit code, which leads to do_install failure.
test -d ${D}/run && rmdir ${D}/run
Modify it to use the if statement to make the do_install task succeed
no matter ${D}/run exists or not.
Also, this patch removes the unused /var/run directory. Leaving that
directory there will result in /run directory created before splitting
package, which in turn lead to 'installed-vs-shipped' QA error or QA
warning.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
"test -z ${PAMLIB}" in do_install() may report error if ${PAMLIB}
has space chars. This commit added double quotes to wrap it in
case of errors.
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Stefan Agner
Jackie Huang
Chong.Lu@windriver.com
Chen Qi
Roy.Li
Kang Kai
zhangxiao
Hongxu Jia
Robert Yang
Joe Slater
Wenzong Fan
Franklin S. Cooper Jr
Richard Purdie
Martin Jansa
Liang Li
Matthieu CRAPET
Qiang Chen
Joe MacDonald
Mark Asselstine