When we start with sysvinit, watchquagga uses quagga init script to
monitor zebra daemon. But we need not do this in systemd environment.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* The variables (SAVANNAH_MIRROR)
are defined in oe-core/meta/conf/bitbake.conf.
* MIRRORS in quagga and libunwind is removed.
because the MIRRORS of savannah is globally defined
in oe-core/meta/classes/mirrors.bbclass
Signed-off-by: Changhyeok Bae <changhyeok.bae@lge.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
When build quagga, it shows QA warnings:
WARNING: QA Issue: ELF binary '/home/build/poky/build/tmp/work/i586-poky-linux/quagga/0.99.21-r2.0/packages-split/quagga-bgpd/usr/sbin/bgpd' has relocations in .text
WARNING: QA Issue: ELF binary '/home/build/poky/build/tmp/work/i586-poky-linux/quagga/0.99.21-r2.0/packages-split/quagga-ripngd/usr/sbin/ripngd' has relocations in .text
The configure script tests compiler whether support option '-fPIE'. If
support, it pass option '-fPIE' to compiler then cause these QA
warnings.
Disable configure script to check option '-fPIC'.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
The Function and CPPFunction had been removed by in readline 6.3, use
the new functions to replace them.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
Once babald becomes a background daemon, it should not output information to
stdout, so need to close stdout.
In fact, other daemons close their stdout when they run into background, like
ospfd, isisd and bgpd, by calling daemon() which is in lib/daemon.c
Closing the stdout can fix a tee hang issue { #/usr/sbin/babeld -d |tee tmp }
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
According to DISTRO_FEATURES to add pam support for quagga, and import
configure file from Fedora.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Change the default config file for making watchquagga can startup successful
Signed-off-by: Bopeng Liu <Bopeng.Liu@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
commit 27ba970b9("quagga/ripd: Fix two bugs after received SIGHUP signal")
introduces an regression: ifp->connected list is cleaned up when ripd is
restarting, however, for interface addresses which are not specified in
ripd configuration file, they are never to be added into ifp->connected
again, this will lead to some abnormal behavior for route advertising.
Instead of cleaning up the ifp->connected list to avoid duplicated
connected address being added into this list, we can check this
condition during interface address adding process and return early
when an identical address has already been added.
Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Use /bin/false as the login shell, just like what Ubuntu does,
otherwise there might be secure issue.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
This patch mainly involves two changes.
1. Create necessary files at do_install task. Add these configuration
files to the CONFFILES variable.
2. Move the `chmod' and `chown' commands to do_install task.
After these two changes, qugga can run successfully at rootfs time.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
There are two problems for ripd implementation after received
SIGHUP signal:
1). ripd didn't clean up ifp->connected list before reload
configuration file which makes the same advertise packet
being sent multiple times(depends on how many SIGHUP was recieved).
2). ripd reset ri->split_horizon flag to RIP_NO_SPLIT_HORIZON
during restart which is different from the flag when ripd is
firstly started up, leading to unnecessary route to be advertised.
[YOCTO #5266]
Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Correct the warning:
quagga-0.99.21: The /usr/share/info/dir file is not meant to be shipped in a particular package.
Simply remove the installed 'dir' file if info docs are installed.
Signed-off-by: Joe MacDonald <joe@deserted.net>
1. quagga should depend on iproute2, since ip from busybox is not sufficient
2. fix a typOS(should chmod, not chown)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
When interface goes down, and there are some static routes that are
made with ip route, they are going to be deleted from kernel fib.
That's what kernel does by default. But they are not going to be
deleted from zebra's fib. They will be declared inactive.
This issue was originally discussed in [1] and a patch was proposed.
[1] http://www.gossamer-threads.com/lists/quagga/dev/22609
Signed-off-by: Aws Ismail <aws.ismail@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
* This change is only aesthetic (unlike indentation in Python
tasks).
* Some recipes were using tabs.
* Some were using 8 spaces.
* Some were using mix or different number of spaces.
* Make them consistently use 4 spaces everywhere.
* Yocto styleguide advises to use tabs (but the only reason to keep
tabs is the need to update a lot of recipes). Lately this advice
was also merged into the styleguide on the OE wiki.
* Using 4 spaces in both types of tasks is better because it's less
error prone when someone is not sure if e.g.
do_generate_toolchain_file() is Python or shell task and also allows
to highlight every tab used in .bb, .inc, .bbappend, .bbclass as
potentially bad (shouldn't be used for indenting of multiline
variable assignments and cannot be used for Python tasks).
* Don't indent closing quote on multiline variables
we're quite inconsistent wheater it's first character on line
under opening quote or under first non-whitespace character in
previous line.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
1. Quagga's tcp-md5 has been renamed to linux24-tcp-md5
2. net-snmp needs to have mib-modules=smux enabled to enable
quagga to support snmp. Make the net-snmp option dependent
on the DISTRO_FEATURE snmp.
3. Misc: install the sample conf files for quagga. Also,
Make sure that the post install script is being run
on the target rather than during the rootfs creation
stage.
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Aws Ismail <aws.ismail@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
* Update to 0.99.21
* Fix SRC_URI to point to a working download location
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
* Add old gentoo patch to fix libcap linking errors
* Put binaries in sbindir
* Use useradd.bbclass to create user/groups
* Handle hardcoded paths in initscript
* Add LSB headers to initscript (borrowed from debian)
* Tidy up packaging and directory references
* Add SUMMARY
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Chong.Lu@windriver.com
Roy Li
Yue Tao
Robert Yang
Changhyeok Bae
Kai Kang
Hongxu Jia
Bopeng Liu
Xufeng Zhang
Chen Qi
Joe MacDonald
Martin Jansa
Aws Ismail
Paul Eggleton