If the gssapi libraries are compiled before cyrus-sasl, configure will call
AC_TRY_RUN to check if gssapi libraries support SPNEGO, but calling AC_TRY_RUN
will fail on cross-compile environment.
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
* Add origin and Upstream-Status to patches
* Set SUMMARY instead of DESCRIPTION
* Add ${PN}d to PACKAGES instead of atftpd to be consistent with the
rest of the recipe
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* Fix stripped file QA warning
* Add proper headers to patches (and split makefile.patch into two
parts, one of which may be upstreamable)
* Use PV in SRC_URI instead of hardcoded version
* Move SRC_URI checksums up next to SRC_URI
* Set SUMMARY instead of DESCRIPTION
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* This change is only aesthetic (unlike indentation in Python
tasks).
* Some recipes were using tabs.
* Some were using 8 spaces.
* Some were using mix or different number of spaces.
* Make them consistently use 4 spaces everywhere.
* Yocto styleguide advises to use tabs (but the only reason to keep
tabs is the need to update a lot of recipes). Lately this advice
was also merged into the styleguide on the OE wiki.
* Using 4 spaces in both types of tasks is better because it's less
error prone when someone is not sure if e.g.
do_generate_toolchain_file() is Python or shell task and also allows
to highlight every tab used in .bb, .inc, .bbappend, .bbclass as
potentially bad (shouldn't be used for indenting of multiline
variable assignments and cannot be used for Python tasks).
* Don't indent closing quote on multiline variables
we're quite inconsistent wheater it's first character on line
under opening quote or under first non-whitespace character in
previous line.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
* Apply all patches from ftp.kernel.org/pub/linux/daemons/autofs/v5/patches-5.0.8/
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
When systemd is in distro features we need to translate it
into the appropriate PACKAGECONFIG flag
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
Building without systemd enabled results in:
WARNING: QA Issue: autofs: Files/directories were installed but not shipped
/lib
/lib/systemd
/lib/systemd/system
/lib/systemd/system/autofs.service
fix that in the PKGCONFIG way.
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
* Backport patch to make yp optional, which uclibc doesn't provide.
* Create patch to include linux/nfs.h instead of nfs/nfs.h.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
I took recipe from OE classic, updated, cleaned and got it build. I use
it only as build dependency - did not checked binaries from ${PN}-bin.
There are RPATH problems to solve:
WARNING: QA Issue: package cyrus-sasl-bin contains bad RPATH
/home/hrw/HDD/devel/canonical/aarch64/openembedded/build/tmp-eglibc/sysroots/genericarmv8/usr/lib
in file
/home/hrw/HDD/devel/canonical/aarch64/openembedded/build/tmp-eglibc/work/aarch64-oe-linux/cyrus-sasl/2.1.26-r0/packages-split/cyrus-sasl-bin/usr/sbin/saslpasswd2
WARNING: QA Issue: package cyrus-sasl-bin contains bad RPATH
/home/hrw/HDD/devel/canonical/aarch64/openembedded/build/tmp-eglibc/sysroots/genericarmv8/usr/lib
in file
/home/hrw/HDD/devel/canonical/aarch64/openembedded/build/tmp-eglibc/work/aarch64-oe-linux/cyrus-sasl/2.1.26-r0/packages-split/cyrus-sasl-bin/usr/sbin/pluginviewer
WARNING: QA Issue: package cyrus-sasl-bin contains bad RPATH
/home/hrw/HDD/devel/canonical/aarch64/openembedded/build/tmp-eglibc/sysroots/genericarmv8/usr/lib
in file
/home/hrw/HDD/devel/canonical/aarch64/openembedded/build/tmp-eglibc/work/aarch64-oe-linux/cyrus-sasl/2.1.26-r0/packages-split/cyrus-sasl-bin/usr/sbin/sasldblistusers2
WARNING: QA Issue: package cyrus-sasl contains bad RPATH
/home/hrw/HDD/devel/canonical/aarch64/openembedded/build/tmp-eglibc/sysroots/genericarmv8/usr/lib
in file
/home/hrw/HDD/devel/canonical/aarch64/openembedded/build/tmp-eglibc/work/aarch64-oe-linux/cyrus-sasl/2.1.26-r0/packages-split/cyrus-sasl/usr/lib/sasl2/libsasldb.so.3.0.0
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
As of 5.0.6, it appears that changes were introduced so that if you
compile with openldap disabled and openldap headers are not available,
then autofs fails to build.
Since autofs no longer depends on openldap, remove the dependency.
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
Reference: http://www.spinics.net/lists/autofs/msg00139.html
Loading autofs module is #ifdef'ed in the source, so
there is no need to check for /proc (which is only used
to load module) or modprobe. Both modprobe and /proc
are always in the fixed location so there's no need to
check for these to start with.
Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
* Autofs was being inherited from systemd. This class is only
present in meta-systemd. So bitbake was giving parse error
about systemd class. So removed systemd from inherit and
removed SYSTEMD_PACKAGES and SYSTEMD_SERVICE.
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
"beginline" is the correct parameter name. Checksums have been updated
where necessary (i.e. if the beginning line was something other than the
default of 1).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
As of OE-Core commit id 406bd38b4232f9f399ef5ffe0b4fac72ed605a23
libexecdir has been changed to ${libdir}/${BPN}. As we are already
deleting ${libdir}/proftpd which is the same as ${libdir}/${BPN} in this
case, introduce a check to see if ${libexecdir} still exists before
attempting to remove it possibly a second time. This will handle if
libexecdir is set to its original value or a custom value in the distro
config.
Based on a patch by Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
This was originally from OE-Classic. Improvements over the OE-Classic
recipe for reference:
* Update to 1.3.4b
* Add workaround for proftpd host IP resolution
* Add initscript, borrowed from Debian with some modifications for
compatibility and handling for hardcoded paths
* Use autotools.bbclass and remove unnecessary configure options
* PARALLEL_MAKE = "" is no longer needed, the bug was fixed in 1.3.3c
* Set SUMMARY (which sets DESCRIPTION) and base it on the short
description from the website
* Use useradd.bbclass to add ftp user/group
* Add HOMEPAGE
* Add/fix description in some patches and improve recipe indentation
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
Some of this work was done by Dexuan Cui <dexuan.cui@intel.com> and
Kevin Strasser <kevin.strasser@linux.intel.com>.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to version 20
* Add LIC_FILES_CHKSUM
* Make LICENSE more accurate
* Set SUMMARY (which sets DESCRIPTION)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to 1.9.1
* Add libdaemon to DEPENDS as needed by 1.9+
* Remove empty config file (not really of much use and there's an
example config in the -doc package anyway)
* Use useradd.bbclass to create user
* Handle hardcoded paths in initscript
* Add LSB headers to initscript (borrowed from openSUSE)
* Set custom LICENSE as it's BSD-Style but not actually one of the
standard BSD variants
* Add LIC_FILES_CHKSUM
* Set SUMMARY (which sets DESCRIPTION)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to 5.2
* Add patches from Fedora
* Add DESCRIPTION and better SUMMARY
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
* Update ALTERNATIVE_* definitions
* Handle hardcoded paths in initscript
Much of this was done by Joe MacDonald <joe.macdonald@windriver.com>.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
The patch adjust-daemon-name.patch is to change the daemon name
ptpd2 back to ptpd, which broke some functionality:
root@qemu0:~# ptpd -g
Error: 1 ptpd daemon(s) detected in parallel, but we were not expecting any. Exiting.
so drop it and use the default daemon name ptpd2.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Martin Jansa
Roy.Li
Paul Eggleton
Joe MacDonald
Andreas Oberritter
Khem Raj
Marcin Juszkiewicz
Randy MacLeod
Amy Fong
yanjun.zhu
Noor Ahsan
Jackie Huang