configure the systemd unit file dir, otherwise it will be auto-checked
by 'pkg-config --variable=systemdsystemunitdir systemd', but if systemd
is not built firstly, and the the unit file will not be installed, and
lead to below error:
ERROR: Function failed: SYSTEMD_SERVICE_lldpd value lldpd.service does not exist
and disable sysusersdir, since sysuser is not used currently.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
There is a build failure while rebuilding postfix
...
| NOTE: make -e MAKEFLAGS= OPT= DEBUG= OPTS= clean
| make -f Makefile.in MAKELEVEL= Makefiles
| (echo "# Do not edit -- this file documents how Postfix was built for your
machine.";/bin/sh makedefs) >makedefs.tmp
| No <db.h> include file found.
| Install the appropriate db*-devel package first.
| Makefile.in:31: recipe for target 'Makefiles' failed
| make: *** [Makefiles] Error 1
| Makefile:21: recipe for target 'Makefiles' failed
| make: *** [Makefiles] Error 2
| ERROR: oe_runmake failed
| ERROR: Function failed: do_configure (log file is located at tmp/work/
core2-64-wrs-linux/postfix/3.0.2-r0/temp/do_configure/log.do_configure.12848)
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
ccdv is an internal tool to reduce the deluge Make output
to make finding actual problems easier and it is intended
to be invoked from Makefiles only, it doesn't work for the
cross compiling, so compile it with $BUILD_CC and
corresponding CFLAGS.
And I think we don't need to enable it by default to
reduce our Make output, so add a PACKAGECONFIG for it
but disable it by default.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
It hardcoded to assign vmail's userid and groupid with 5000,
which caused the following useradd/groupadd is increased from
5000 at do_root time. Such as 'tracing' group id is 5001
(tracing group is added in lttng-tools).
It is better to allocate it dynamically.
BTW, you may google to find the hardcoded 5000 in following site:
https://help.ubuntu.com/community/PostfixVirtualMailBoxClamSmtpHowto
In its main.cf, it also hardcoded virtual_uid_maps and virtual_gid_maps.
...
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
..
But in meta-oe's main.cf_2.0, it assigned virtual_uid_maps and
virtual_gid_maps with a search.
...
virtual_uid_maps = static:`grep vmail /etc/passwd | cut -d ":" -f 3`
virtual_gid_maps = static:`grep vmail /etc/passwd | cut -d ":" -f 4`
...
So please feel free to forget 5000.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Don't enable GNU atomic operations for all targets, it fails on
powerpc and mips:
AtomicWord.h: undefined reference to `__sync_fetch_and_add_8'
collect2: error: ld returned 1 exit status
Refer to https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56300:
There is no hardware support for 8 bytes atomic operations on
32-bit MIPS targets.
The 32-bit PowerPC fails as well.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1. fix the building failure when host is gcc5
2. fix the building failure when DEBUG_BUILD is 1 by removal of -Werror
Remove -Werror, since it is suitable to develop only; otherwise when
gcc adds -O0 option to compile codes, the error will be generated
since the warning:
//# warning _FORTIFY_SOURCE requires compiling with optimization (-O)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1. Remove the squid-change-ksh-referen*.patch which is not needed, since
3.5.7 did not use ksh by default.
2. Update the checksum of COPYING,since the date in it has been changed.
3. Define BUILDCXXFLAGS, otherwise the target gcc options -std=c++11 will
add into it, and lead to building failure since host gcc maybe not
support "-std=c++11"
4. Assume to support GNU atomic operations by default, the running check
on cross-compile setup does not work
5. enable basic auth by checking the DISTRO_FEATURE, and the default
dependency on db, opensasl and openldap nis have been set, so enable
them by default.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
atftp fails to build with gcc 5.2:
git/tftp_def.h:54:14: warning: inline function 'Strncpy' declared but never defined
git/argz.c:44:8: error: redefinition of 'argz_next'
GCC 5 defaults to -std=gnu11 instead of -std=gnu89. The semantics of
inline function changes. Pass '-std=gnu89' to gcc to compile atftp.
Ref:
https://gcc.gnu.org/gcc-5/porting_to.html
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Delete ptpd-add-dpaa-etsec-support.patch.The reason is the following:
- The ptpd-add-dpaa-etsec-support.patch does not suitable for new version.
- The upstream didn't accept this patch.
Signed-off-by: Lei Maohui <leimaohui@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
OpenSAF uses OpenHPI if available. If openhpi happens to be in
PACKAGECONFIG from the build, turn on support in OpenSAF and add it to the
DEPENDS list.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1) WARNING: The recipe opensaf is trying to install files into a
shared area when those files already exist,so set
--libdir=${libdir}/opensaf
2) Add systemd service file plmcboot.service and plmcd.service.
Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1.Remove postfix-add-db6-support.patch which is not needed,
since it is backported from upstream.
2.update install.patch and makedefs.patch that context changes.
3.Install smtp-sink which listens on the named host (or address) and port.
It takes SMTP messages from the network and throws them away.
Ref: http://www.postfix.org/smtp-sink.1.html
Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Bitbake is likely to require this parameter in future, add
the default value.
Patch generated with the command:
sed -e 's:\(getVar([^,()]*\)\s*):\1, False):g' -i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
daemon_directory is set to /usr/lib/postfix which causes daemon postfix
fails to start on 64 bits target if enable multilib. Set daemon_directory
with libexecdir to fix it.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
SECTION has been used inconsistently throughout the recipes in this layer.
Convert them to all use the same convention.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
We should set group of ${localstatedir}/lib/postfix to 'nogroup' not 'postfix',
actually it's done at the below, so remove this useless code.
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
pcap-config should not be used for determining how to build against
libpcap in a yocto environment.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Specifying the plugin directory with a trailing '/' hit this failure in
the install rule:
... snip ...
install-exec-local: $(INSTALLOSX)
@if test "$(plugindir)" != "$(prefix)/lib/sasl2"; then \
echo "********************************************************"; \
echo "* WARNING:"; \
echo "* Plugins are being installed into $(prefix)/lib/sasl2,"; \
echo "* but the library will look for them in $(plugindir)."; \
echo "* You need to make sure that the plugins will eventually"; \
echo "* be in $(plugindir) -- the easiest way is to make a"; \
echo "* symbolic link from $(plugindir) to $(prefix)/lib/sasl2,"; \
echo "* but this may not be appropriate for your site, so this"; \
echo "* installation procedure won't do it for you."; \
echo "*"; \
echo "* If you don't want to do this for some reason, you can"; \
echo "* set the location where the library will look for plugins"; \
echo "* by setting the environment variable SASL_PATH to the path"; \
echo "* the library should use."; \
echo "********************************************************"; \
fi
Work around that.
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
postfix should be started by default, so that the root user can
receive mail, and if init is not systemd, it is started by default
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
iscsid is installed into ${sbindir}, which is /usr/sbin, not /sbin/,
so fix it in /etc/iscsi/iscsid.conf
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
The default configuration for OpenSAF creates /run and /var/lock during
install time. Tweak the recipe to use ${localstatedir} as other recipes
do, and clean up at the end of do_install.
Swap the hard-coded SRC_URI with ${SOURCEFORGE_MIRROR} while we're at it.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Roy Li
Hongxu Jia
Jackie Huang
Li Xin
Joe Slater
Wenzong Fan
Fabio Berton
Kai Kang
leimaohui
Ross Burton
Tudor Florea
Joe MacDonald
Richard Purdie
Szombathelyi György
Robert Yang
Bian Naimeng