The NetworkManager meson.build is searching for iptables and nft by
passing absolute paths to meson's find_program. The result is that it
locates tools on the host machine when they exist at those locations. If
they don't, it uses default locations. This often works out, but in some
cases, such as when the host uses a merged usr scheme and the build
target does not, the paths will be incorrect and the tools won't be
found at runtime.
These could be PACKAGECONFIG options, but since they have fallback
values, completely disabling the use of either iptables or nft would
require patching the meson.build or setting a bogus location.
Note that this meson.build file follows the same pattern elsewhere, but
most cases are already covered by PACKAGECONFIG options.
Signed-off-by: Jim Broadus <jim@thruwave.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
(cherry picked from commit 7c44094532)
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
If 'ppp' packageconfig option is enabled, but the build system does NOT
have pppd binary installed, the build fails with:
| Has header "pppd/pppd.h" : YES
| Program pppd /sbin/pppd /usr/sbin/pppd found: NO
|
| ../NetworkManager-1.36.2/meson.build:570:4: ERROR: Assert failed: pppd required but not found, please provide a valid pppd path or use -Dppp=false to disable it
This is due to meson trying to look for the 'pppd' binary in the build
system when it should not. If the build system does not contain pppd,
the build fails.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
0001-do-not-ask-host-for-ifcfg-defaults.patch refreshed for new version
Changelog:
==========
* When the list of plugins is not specified via "main.plugins" in
NetworkManager.conf and no build-time default is set with
"--with-config-plugins-default" configure argument, now all known
plugins found in the plugin directory are loaded (and the built-in
"keyfile" plugin is preferred over others).
* Preserve external ports during checkpoint rollback
* Fix removal of ovsdb entry when an OVS interface goes away
* Fix DNS configuration for WWAN connections
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
* Gtk4 version of the editor plugin is now available (for use with Control
Center of GNOME 42 or later).
* Update Catalan, Croatian, Czech, Hebrew and Slovenian translations.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Fix installed-vs-shipped error of networkmanager:
| ERROR: networkmanager-1.36.0-r0 do_package: QA Issue: networkmanager:
Files/directories were installed but not shipped in any package:
| /usr/lib/firewalld
| /usr/lib/firewalld/zones
| /usr/lib/firewalld/zones/nm-shared.xml
| Please set FILES such that these items are packaged. Alternatively if they
are unneeded, avoid installing them or delete them with in do_install.
| networkmanager: 3 installed and not shipped files. [installed-vs-shipped]
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
- Allow to compile nmcli with libedit (alternative to gplv3 readline)
- Support iwd as well as wpa-supplicant for wifi
- Make vala build-time dependency optional
- Split all plugins into packages. By default all packages are installed
acc. to features in the PACKAGECONFIG but it's now possible to build
images where only some plugins are installed.
- Move FILES:networkmanager to last position to increase the FILES
priority of other packages.
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
- Switch to meson build-system
- Removed 0003-install-firewalld-to-var-libdir-rather-than-hardcod-.patch
nm-shared.xml gets installed into /usr/lib/firewalld/zones where also
firewalld installs its xml files. Not 100% sure this is as it was
before but it seams to be consistent with firewalld.
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Overview of changes since NetworkManager-1.34
=============================================
* The handling of Layer 3 configurations has been substantially reworked.
While this is mostly internal change, it results in more robust
behavior when addressing information from multiple sources (DHCP,
manually configured, VPN) need to be applied simultaneously.
Overall performance and memory use have also slightly improved.
* Manually configured addresses can no longer expire even if the same
addresses are also obtained dynamically.
* Code for systemd-based DHCP and DHCPv6 clients has been updated from
upstream.
* NTP servers obtained via DHCPv6 are now exposed on the DBus API, visible
in nmcli and available for use by dispatcher scripts.
* 5G NR (New Radio) modems are now supported.
* The "rd.znet_ifnames" kernel command line option is now honored on
network bootups on an IBM s390 platform.
* Wi-Fi P2P support does now work with the IWD backend, in addition to
wpa_supplicant backend.
* Support for special route types have been added: "prohibit", "blackhole"
and "unreachable".
* Routes managed by routing daemons are now ignored. This is done to
address a performance bottleneck on specialized routers.
* Handling of IP addressing and routing information is now slightly
more efficient and uses less memory. This is apparent on systems with
large amount of IP configuration information.
* It is now possible to start NetworkManager without root user privileges.
This is experimental doesn't necessarily result in a working daemon.
NetworkManager service already drops many of capabilities available
to the root user.
* WPA3 Wi-FI network security have been improved by enabling new H2E (hash
to element) method for generating SAE password element.
* It is now possible to select the default Wi-Fi backend (wpa_supplicant or
IWD) at build-time.
* Replies from broken DHCP servers that send duplicate address or mask
options are now handled gracefully.
* Bridge support has gained the possibility of turning off MAC ageing.
* "configure-and-quit" mode and nm-iface-helper have been removed.
* A number of bugs that could cause NetworkManager to crash in rare
conditions have been fixed.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
=========
* initrd: wait for both IPv4 and IPv6 with "ip=dhcp,dhcp6".
* core: better handle sd-resolved errors when resolving hostnames.
* nmcli: fix import WireGuard profile with DNS domain and address
family disabled.
* ndisc: send router solicitations before expiry.
* policy: send earlier the ip configs to the DNS manager.
* core: support linking with LLD 13.
* wireguard: importing wg-quick configuration files with nmcli
no longer sets a negative, exclusive "dns-priority". This plays
better with common split DNS setups that use systemd-resolved.
Adjust the "dns-priority" to your liking after import yourself.
* NetworkManager no longer listens for netlink events for traffic
control objects (qdiscs and filters).
* core: add internal nm-priv-helper service for separating privileges
and have a way to drop capabilities from NetworkManager daemon.
* bond: add support for setting queue-id of bond port.
* dns: support configuring DNS over TLS (DoT) with systemd-resolved.
* nmtui: add support for WireGuard profiles.
* nmcli: add aliases `nmcli device up|down` beside connect|disconnect.
* conscious language: Deprecate 'Device.Slaves' D-Bus property in favor of new
'Device.Ports' property. Depracate 'nm_device_*_get_slaves()' in favor of
'nm_device_get_ports()' in libnm.
* nmcli: invoking nmcli command without arguments will now show 'default'
instead of null address in route4 or route6 section.
The following changes were backported to 1.32.x releases between 1.32.0
and 1.32.12 are also present in NetworkManager-1.34:
- 1.32.12:
* Fix wrong order of addresses when restarting NetworkManager.
* Preserve the IPv6 ff00::/8 route added by kernel in the local table,
necessary for multicast communication.
* Fix emitting the signal for changed metered status of devices.
* Fix applying the ethtool autonegotiation and speed settings.
* initrd: fix crash parsing plain '=' without key.
* cloud-setup: use suppress_prefixlength rule to honor
non-default-routes in the main table.
- 1.32.10:
* core: fix the order of IPv6 addresses changing on service restart.
* initrd: add command line option to configure link autonegotiation
and speed.
* ifcfg-rh: fix crash when parsing invalid DNS address.
* ifcfg-rh: extend ifup/ifdown scripts to work with connection profile
names.
* udev: also react to "move" (and "change") udev actions in our rules.
- 1.32.8:
* firewalld: configure zones on "Reloaded" signal.
* core: fix wrong MTU for bridge interfaces.
* cloud-setup: fix gateway address for Aliyun cloud.
- 1.32.6:
* core: fix adding stale local routes when address changes.
* initrd: tag generated profiles with origin in user data.
* core: introduce "allowed-connections" option to disallow
profiles on a device. This allows to filter out profiles
that originate from initrd.
* core: introduce "keep-configuration" device option to forcefully
activate a profile on start.
* dhcp: handle filename/bootfile_name DHCP option and write it to
device state file for initrd/kickstart.
* initrd: add "ib.pkey=" command line option
- 1.32.4:
* core: remove stale entries from "seen-bssids" and "timestamp"
files in "/var/lib/NetworkManager".
* bond: support the peer_notif_delay option.
* core: add ipv[46].required-timeout option to wait for IP
configuration while activating.
* core: send ARP announcements when there is carrier.
* core: start DHCPv6 when a prefix delegation is needed for shared
mode.
* firewall: fix nftables backend to create "ip" table for
IPv4 only.
* initrd: set required-timeout of 20 seconds for default IPv4 configuration
to opportunistically wait for IPv4.
* ifcfg: log warning about invalid keys in ifcfg files.
* ifcfg: reject non-UTF-8 from ifcfg files.
* nmcli: show DNS SEARCH field in device information.
* cloud-setup: add support for Aliyun cloud.
- 1.32.2:
* hostname: prefer IPv4 addresses for reverse DNS lookup.
* dhcp: ignore unauthenticated FORCERENEW messages with
internal, systemd-based DHCPv4 plugin (CVE-2020-13529).
This plugin is not used, unless the undocumented dhcp=systemd
option was set.
* cloud-setup: preserve IP addresses, routes and rules from
currently active connection profile.
* Various bugfixes and performance improvements.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
===============================================
NetworkManager-1.32.8
Overview of changes since NetworkManager-1.32.6
===============================================
* firewalld: configure zones on "Reloaded" signal.
* core: fix wrong MTU for bridge interfaces.
* cloud-setup: fix gateway address for Aliyun cloud.
===============================================
NetworkManager-1.32.6
Overview of changes since NetworkManager-1.32.4
===============================================
* core: fix adding stale local routes when address changes.
* initrd: tag generated profiles with origin in user data.
* core: introduce "allowed-connections" option to disallow
profiles on a device. This allows to filter out profiles
that originate from initrd.
* core: introduce "keep-configuration" device option to forcefully
activate a profile on start.
* dhcp: handle filename/bootfile_name DHCP option and write it to
device state file for initrd/kickstart.
* initrd: add "ib.pkey=" command line option
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This is the result of automated script (0.9.1) conversion:
oe-core/scripts/contrib/convert-overrides.py .
converting the metadata to use ":" as the override character instead of "_".
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Upgrade to release 1.30.2:
- 0004-fix_reallocarray_check.patch removed because the current
version of nm already includes boths malloc.h and stdlib.h
- musl/0002-Fix-build-with-musl.patch removed because the commit
c50da167bc of nm solves the build issue with musl
- musl/0001-Fix-build-with-musl-systemd-specific.patch modified
to avoid conflicts when applied to current version of nm
- musl/0003-Fix-build-with-musl-systemd-specific.patch renamed
to musl/0002-Fix-build-with-musl-systemd-specific.patch and
modified to avoid conflicts when applied to current version of nm
Signed-off-by: Vinicius Aquino <voa.aquino@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Open vSwitch support is enabled by default in NetworkManager, but only
useful in the context of several virtualisation environments, e.g. Xen,
KVM, OpenStack and more. Therefore, the ovs PACKAGECONFIG is now disabled by
default.
The jansson dependency is only required for Open vSwitch and teamsdctl
support in NetworkManager. As there is no libteamsdctl recipe around
(and no teamsdctl PACKAGECONFIG), make it dependent on the ovs
PACKAGECONFIG.
Signed-off-by: Nicolas Jeker <n.jeker@gmx.net>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Introduce PACKAGECONFIG[nmcli] to make building the nmcli utility which
depends on GPLv3 licensed readline library optional.
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Linux Wireless Extensions (Wext) support is enabled per default in
NetworkManager. Having Wext enabled without enabling WiFi support, too,
doesn't make much sense. Therefore, instead of creating a separate
PACKAGECONFIG flag, 'wext' was added to the already existing 'wifi'
flag.
Signed-off-by: Nicolas Jeker <n.jeker@gmx.net>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* Build tested on aarch64 glibc/musl
* 0003-Fix-build-with-musl-for-n-dhcp4.patch has to go. Grepped nm code for
seed48_r / mrand48_r => no findings
* Since this is a huge version bump no detaile release notes are provided here
* Have tried to move to meson build few months ago but it turned into huge
efforts and ended without success. Maybe situation changed but let's postpone
for now
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
nmcli depends on libreadline which is licensed under GPLv3.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Since networkmanager: upgrade 1.22.10 -> 1.22.14, it added a new
build option 'firewalld-zone', while enabling multilib, there is
a QA issue
...
ERROR: QA Issue: networkmanager: Files/directories were installed but not shipped in any package:
/usr/lib/firewalld
/usr/lib/firewalld/zones
/usr/lib/firewalld/zones/nm-shared.xml
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
================================================
NetworkManager-1.22.14
Overview of changes since NetworkManager-1.22.12
================================================
This is a new stable release of NetworkManager. Notable changes include:
* ifcfg-rh: handle "802-1x.{,phase2-}ca-path". Otherwise setting this
property silently fails and a profile might accidentally not perform
any authentication (CVE-2020-10754).
* ifcfg-rh: handle 802-1x.pin properties.
================================================
NetworkManager-1.22.12
Overview of changes since NetworkManager-1.22.10
================================================
This is a new stable release of NetworkManager. Notable changes include:
* Fix a bug preventing lease renewal in the internal DHCP client.
* Add a new build option 'firewalld-zone'; when enabled,
NetworkManager installs a firewalld zone for connection sharing and
puts interfaces using IPv4 or IPv6 shared mode in this zone during
activation. The option is enabled by default.
Note that NetworkManager still calls to iptables to enable
masquerading and open needed ports for DHCP and DNS. The new option
is useful on systems using firewalld with the nftables backend,
where the iptables rules would not be sufficient.
* Support changing the MTU of OVS interfaces.
* Better handle a restart of ovsdb process.
* Support the 'no-reload' and 'trust-ad' resolv.conf options.
* Various minor bug fixes and improvements.
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
>From [1]:
=======================================================
NetworkManager-openvpn-1.8.12
Overview of changes since NetworkManager-openvpn-1.8.10
=======================================================
* The auth helper in external UI mode can now be run without a display
server. Future nmcli version will utilize this for handling the
secrets without a graphical desktop.
* libnm-glib compatibility (NetworkManager < 1.0) is disabled by default.
It can be enabled by passing --with-libnm-glib to configure script.
Nobody should need it by now. Users that still use this are encouraged
to let us know before the libnm-glib support is removed for good.
* Add support for the following OpenVPN options: tls-version-min,
tls-version-max, compress.
* Support inline CRL blobs during import.
* Allow option mssfix to be set to zero.
* Update Catalan, Czech, Danish, Dutch, Friulian, Hungarian,
Indonesian, Italian, Polish, Serbian, Spanish, Swedish and Ukrainian
translations.
[1] http://ftp.gnome.org/pub/gnome/sources/NetworkManager-openvpn/1.8/NetworkManager-openvpn-1.8.12.news
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
- rebased patches
- added two more small patches
- Option --enable-polkit-agent is not available with current NM, removed
- Option --with-libnm-glib is not available with current NM, removed
- New package NM-cloud-setup for new experimental cloud setup feature
- NM tries to re-license from GPL to LGPL, added LGPL to LICENSES
- Removed empty packages libnmutil libnmglib libnmglib-vpn
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The 84-nm-drivers.rules is not required for systemd-udevd versions
v210 and later. The file has been split into a separate file so
distributions with a new enough systemd version can drop it. See
also:
https://github.com/NetworkManager/NetworkManager/commit/1e0375826252abf9aab2aef273a2a24cd08c9f42
I noticed this while investigating into a warning show during
bootup:
/usr/lib/udev/rules.d/84-nm-drivers.rules:10 Invalid value "/bin/sh -c
'ethtool -i $1 | sed -n s/^driver:\ //p' -- $env{INTERFACE}" for PROGRAM
(char 24: invalid substitution type), ignoring, but please fix it.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Remove a generated file with always changing hash from LIC_FILES_CHKSUM.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It is no longer necessary to introduce a potential security
vulnerability for fixing the musl build.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This brings the networkmanager in sync with how systemd-resolved and connman
work. Additionally this allows it to function with a read-only rootFS.
Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Jim Broadus
Javier Viguera
Yi Zhao
Wang Mingyu
Kai Kang
Khem Raj
Adrian Freihofer
Oleksandr Kravchuk
zangrc
Andreas Müller
Martin Jansa
Vinicius Aquino
zhengruoqin
Nicolas Jeker
Christian Eggers
Hongxu Jia
Adrian Bunk
Stefan Agner
Otavio Salvador
Laszlo Toth
Drew Moseley