Correct the usage of alternative link and target:
ALTERNATIVE_LINK_NAME[name] = "target"
ALTERNATIVE_TARGET[name] = "target"
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
The default ntp.conf file does the right thing but one of the comments is
a bit misleading based on the active parts of the file changing a few
times. Update the comment to accurately describe what is happening in the
configuration file and what a user should do next.
Signed-off-by: Joe MacDonald <joe@deserted.net>
When ntpd starts, it will create a daemon to connect this invalid server,
and fail, then ntpd will create other daemon to connect the local-only
(127.127.1.0) server.
The users should be aware that they need to configure the correct ntp
servers, a invalid server will lead to a redundant daemon, so it is better
to comment this example server to wait user to configure
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
tcpreplay - a suite of GPLv3 licensed tools for UNIX operating systems
which gives you the ability to use previously captured traffic in libpcap
format to test a variety of network devices.
Signed-off-by: Zongchun Yu <Zongchun.Yu@freescale.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
/var/run/ is more suitable to store pidfile for OE, and this fixes
"/etc/init.d/proftpd stop" failure too, since this script assumes
the pidfile is under /var/run
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
According to DISTRO_FEATURES to add pam support for quagga, and import
configure file from Fedora.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Change the default config file for making watchquagga can startup successful
Signed-off-by: Bopeng Liu <Bopeng.Liu@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
commit 27ba970b9("quagga/ripd: Fix two bugs after received SIGHUP signal")
introduces an regression: ifp->connected list is cleaned up when ripd is
restarting, however, for interface addresses which are not specified in
ripd configuration file, they are never to be added into ifp->connected
again, this will lead to some abnormal behavior for route advertising.
Instead of cleaning up the ifp->connected list to avoid duplicated
connected address being added into this list, we can check this
condition during interface address adding process and return early
when an identical address has already been added.
Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Use /bin/false as the login shell, just like what Ubuntu does,
otherwise there might be secure issue.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
If ntpd script is being called by a non-root user using sudo,
it will fail as follows:
/etc/init.d/ntpd restart
Stopping ntpd: /etc/init.d/ntpd: line 29: start-stop-daemon:
command not found
done
Starting ntpd: /etc/init.d/ntpd: line 24: start-stop-daemon:
command not found
done
This is because /etc/init.d/ntpd calls start-stop-daemon which
is in /sbin (not in the default path for non-root users)
Explicitly configure the PATH to include /sbin.
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Reworked to set PATH instead of hardcode the location of start-stop-daemon
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
We don't have a proper help2man so building the manpages fails; just
disable building them to fix this as we do elsewhere.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Proftpd is meant to be a system user, not a normal user of the
system so lets pass the correct parameters to the system.
Just add --system param when creating ftp group.
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
*snort - a free lightweight network intrusion detection
system for UNIX and Windows
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
While multilib enabled on qemux86-64, accel-ppp-lib should be installed to
'${baselib}/accel-ppp', but the accel-ppp's CMakeLists.txt hardcoded
to install to 'lib/accel-ppp', such as:
...
INSTALL(TARGETS log_file
LIBRARY DESTINATION lib/accel-ppp
)
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
A minimum dnsmasq version of 2.5.9 is required deal with IPv6 link local
addresses. So instead of just going to the minimum version, we can go
all the way to 2.6.3.
As part of this update, the following changes have been made in addition to
the pure version update:
- PR is dropped in favour of PRSERVER functionality
- dhcp_release is added to the default build, since it is used in the
cleanup phase for virtual machines.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
netcf was orginally introduced in meta-virtualization, since it provides
functionality required by libvirt, but it is otherwise not bound to
virtualization.
So we can move it to meta-networking, and in the process uprev to the
the latest 0.2.3 functinality.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
regdbdump and crda are installed in /sbin/ and still link against stuff in
/usr/lib, causing QA warnings / errors:
WARNING: QA Issue: crda: /sbin/regdbdump, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libgcrypt.so.11 => /usr/lib64/libgcrypt.so.11 (0x00000000dead1000)
WARNING: QA Issue: crda: /sbin/regdbdump, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libgpg-error.so.0 => /usr/lib64/libgpg-error.so.0 (0x00000000dead3000)
WARNING: QA Issue: crda: /sbin/crda, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libgcrypt.so.11 => /usr/lib64/libgcrypt.so.11 (0x00000000dead1000)
WARNING: QA Issue: crda: /sbin/crda, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libnl-genl-3.so.200 => /usr/lib64/libnl-genl-3.so.200 (0x00000000dead2000)
WARNING: QA Issue: crda: /sbin/crda, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libnl-3.so.200 => /usr/lib64/libnl-3.so.200 (0x00000000dead3000)
WARNING: QA Issue: crda: /sbin/crda, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libnl-nf-3.so.200 => /usr/lib64/libnl-nf-3.so.200 (0x00000000dead4000)
WARNING: QA Issue: crda: /sbin/crda, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libnl-route-3.so.200 => /usr/lib64/libnl-route-3.so.200 (0x00000000dead5000)
WARNING: QA Issue: crda: /sbin/crda, installed in the base_prefix, requires a shared library under exec_prefix (/usr): libgpg-error.so.0 => /usr/lib64/libgpg-error.so.0 (0x00000000dead7000)
relocate them to /usr/sbin to squelch the warning.
Signed-off-by: Joe MacDonald <joe@deserted.net>
If we build a project without systemd support on a system that has systemd
enabled, the following QA items get flagged:
/lib
/lib/systemd
/lib/systemd/system
/lib/systemd/system/autofs.service
Trying to keep the solution to the problem as contained as possible in a
way that may be accepted up-stream by adding an optional parameter to the
--with-systemd flag.
Signed-off-by: Joe MacDonald <joe@deserted.net>
* Remove all PR = "r0" from all .bb files in meta-oe repo. This was done
with the command sed -e '/^PR.*=.*r0\"/d' meta*/recipes*/*/*.bb -i
* We've switching to the PR server, PR bumps are no longer needed and
this saves people either accidentally bumping them or forgetting to
remove the lines (r0 is the default anyway).
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* make files in bindir/sbindir a bit more deterministic
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
We can use chmod to set the SUID bit for applications in the do_install
task. If we do so, the pkg_postinsts are no longer needed.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
This patch mainly involves two changes.
1. Create necessary files at do_install task. Add these configuration
files to the CONFFILES variable.
2. Move the `chmod' and `chown' commands to do_install task.
After these two changes, qugga can run successfully at rootfs time.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
`/etc/init.d/populate-volatile.sh update' only needs to run in case
of an on-target installation. And it should have a prerequisite that
the script is executable.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
saslpasswd2 is used by an administrator to set a user's sasl password,
setting a default one in pkg_postinst in not only unnecessary but also
inappropriate.
Besides, running saslpasswd2 takes a significant amount of time to finish,
so this pkg_postinst will make the first boot take longer time.
According to the above two reasons, the patch remove the pkg_postint.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
While making use of the cyrus-sasl library an external application
will most likely include sasl.h which will cause compilation failures
if steps haven't been taken to define size_t. This should not be the
responsibility of the application building against the sasl library
but rather handled already in sasl.h. Here we ensure sasl.h has the
proper includes to have size_t defined before it is used.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
There are two problems for ripd implementation after received
SIGHUP signal:
1). ripd didn't clean up ifp->connected list before reload
configuration file which makes the same advertise packet
being sent multiple times(depends on how many SIGHUP was recieved).
2). ripd reset ri->split_horizon flag to RIP_NO_SPLIT_HORIZON
during restart which is different from the flag when ripd is
firstly started up, leading to unnecessary route to be advertised.
[YOCTO #5266]
Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
configure python files installation path or else it will use the
default value /usr/lib/python*, which is wrong on 64bit and multilibs
enabled system
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
The tftp-hpa package installs /var/lib/tftpboot and tftpd-hpa is
configured to use that directory, but the default points at /svc/tftpboot.
Correct that so the default points to a location that exists when the
package is installed.
Signed-off-by: Joe MacDonald <joe@deserted.net>
Add --ignore-fail-on-non-empty for rmdir in case there are files in the
directories.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
If ${D}/run doesn't exist, the following statement will have non-zero
exit code, which leads to do_install failure.
test -d ${D}/run && rmdir ${D}/run
Modify it to use the if statement to make the do_install task succeed
no matter ${D}/run exists or not.
Also, this patch removes the unused /var/run directory. Leaving that
directory there will result in /run directory created before splitting
package, which in turn lead to 'installed-vs-shipped' QA error or QA
warning.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
"test -z ${PAMLIB}" in do_install() may report error if ${PAMLIB}
has space chars. This commit added double quotes to wrap it in
case of errors.
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Otherwise, configure will try to auto-detect using host paths.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Joe MacDonald <joe@deserted.net>
standalone daemon exits as recipe installs file as tftpd-hpa
* Changed script so it can consult /etc/default, as daemon name may be
subject to change.
* Changed the default name to match the recipe
Signed-off-by: David Turgeon <david.turgeon@gmail.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Based on work by David Nyström (meta-virtualization) and Laszlo Papp
(meta-oe).
- Import OpenFlow 1.0 from meta-virtualization and provide an updated
version of the recipe for the head of tree in the OpenFlow git
repository.
- Minor tweak in both recipes for do_install_append() spacing.
- Update 'libssl' PACKAGECONFIG flag in both to follow the 'openssl'
convention used elsewhere in meta-oe.
- Create common include file for both versioned and git recipes.
Signed-off-by: Joe MacDonald <joe@deserted.net>
The 0.3 release was a year ago and git HEAD contains fixes to make it
work with contiki, so build from git instead of backporting all of the
patches.
Based on a patch by Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Change default value of secure_chroot_dir to /var/run/vsftpd/empty, add
volatiles entry for it, to ensure it won't fail to start with error:
"500 OOPS: vsftpd: not found: directory given in 'secure_chroot_dir':/var/share/empty"
This shows up in both standalone mode or started by xined.
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>
Jackie Huang
Joe MacDonald
Roy Li
Zongchun Yu
Hongxu Jia
Bopeng Liu
Xufeng Zhang
Robert Yang
Qiang Chen
Paul Eggleton
Chunrong Guo
Bruce Ashfield
Martin Jansa
Chen Qi
Mark Asselstine
Andreas Oberritter
David Turgeon
Ting Liu
Ming Liu