This recipe was removed in oe-core as obsolete (replaced by libpcre2).
Since some recipes in meta-oe still depend on it, moe it here.
Signed-off-by: Peter Marko <peter.marko@siemens.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
The android-tools-conf recipe used /sys/class/android_usb/android0/,
an interface exported by the out-of-tree android.c USB gadget driver
that Google carried in Android kernels but never submitted to mainline
Linux. It was never part of any upstream kernel release.
The configfs-based USB gadget framework (CONFIG_USB_CONFIGFS) was
merged into mainline Linux with kernel 3.10 (June 2013) and is the
correct interface for all upstream kernels since then. Additionally,
Google's Generic Kernel Image (GKI) initiative dropped android.c from
Android common kernels starting with kernel 5.10 (Android 12, 2021),
so even custom BSPs targeting modern Android cannot use this interface.
Remove android-tools-conf and rename android-tools-conf-configfs to
android-tools-conf, since the configfs-based implementation is the
only correct one for any modern kernel. Backward compatibility is
preserved via PROVIDES/RPROVIDES retaining the old
android-tools-conf-configfs name.
AI-Generated: Uses GitHub Copilot (Claude Sonnet 4.6)
Signed-off-by: Etienne Cordonnier <ecordonnier@snap.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Add ptest support to enable runtime testing of openjpeg library.
Only unit tests are included, excluding tests that require external
data files (NR-/CONF-/ETS-/testjp2).
Tested on intel-x86-64: all 29 unit tests passed.
Signed-off-by: sjiao <Shilong.Jiao@windriver.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
The dynamic-layers/clang-layer/ directory does not exist under meta-oe.
Remove the stale BBFILES_DYNAMIC references as they match nothing.
Signed-off-by: Jiaying Song <jiaying.song.cn@windriver.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Add ptest support for jsoncpp to enable automated testing of the
JSON C++ library functionality.
Note:
- Tested on: WRLinux master-wr (based on meta-openembedded master)
- jsoncpp version: 1.9.7
- Unable to test on pure upstream due to poky/meta-oe branch mismatch
Test Result:
root@qemux86-64:~# ptest-runner jsoncpp
START: ptest-runner
2026-04-15T14:04
BEGIN: /usr/lib64/jsoncpp/ptest
PASS: jsoncpp_readerwriter
PASS: jsoncpp_readerwriter_json_checker
PASS: jsoncpp_test
DURATION: 122
END: /usr/lib64/jsoncpp/ptest
2026-04-15T14:06
STOP: ptest-runner
TOTAL: 1 FAIL: 0
Signed-off-by: Zeming LIU <zeming.liu@windriver.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Contains fix for CVE-2026-34080. Since it is tracked without version info
by NVD, mark it explicitily as patched.
Drop the patch that is included in this release.
While here, also add the recipe to the ptest list - it's a fast one,
runs under a second.
Changelog:
- Drop the autotools build system
- Unbreak the CI
- Prevent a crash on disconnect
- Fix building with glibc >= 2.43
- Fix the eavesdrop filtering to prevent message interception
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Here is the setting in bcc recipe:
COMPATIBLE_HOST = "(x86_64.*|aarch64.*|powerpc64.*|riscv64.*)-linux"
bcc only support 64 bit arch, so add it into NON_MULTILIB_RECIPES
to avoid expanding lib32- variant
Signed-off-by: Harish Sadineni <Harish.Sadineni@windriver.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
Add ptest infrastructure to run the PostgreSQL standard regression test
suite (pg_regress) on the target system.
Test logs:
root@qemux86-64:~# ptest-runner postgresql
START: ptest-runner
2026-03-24T02:42
BEGIN: /usr/lib64/postgresql/ptest
.....
**if all pass **
PASS: - event_trigger_login 1901 ms
PASS: - fast_default 9459 ms
PASS: - tablespace 16542 ms
PASS: all tests passed
**if have fail**
FAIL: create_type 1763 ms
PASS: create_schema 2123 ms
PASS: - tablespace 23226 ms
FAIL: some tests failed
waiting for server to shut down.... done
server stopped
DURATION: 853
END: /usr/lib64/postgresql/ptest
2026-03-24T02:56
STOP: ptest-runner
TOTAL: 1 FAIL: 0
Signed-off-by: Guocai He <guocai.he.cn@windriver.com>
Signed-off-by: Khem Raj <khem.raj@oss.qualcomm.com>
The patches are required to build with detached build directory and
cross-compiling.
Signed-off-by: Jörg Sommer <joerg.sommer@navimatix.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It takes about a second to execute.
The test suite is covered by a different license (lgpl 2.1+) than the
main recipe (3-clause bsd).
Sample output:
root@qemux86-64:~# ptest-runner
START: ptest-runner
2025-12-22T19:34
BEGIN: /usr/lib/uriparser/ptest
[==========] Running 407 tests from 35 test suites.
[----------] Global test environment set-up.
[----------] 14 tests from CopyUriSuite
PASS: CopyUriSuite.ErrorSourceUriNull
PASS: CopyUriSuite.ErrorDestUriNull
[...many lines...]
PASS: SetUserInfo.UriWithoutHostNonNullRejected
[----------] 2 tests from VersionSuite
PASS: VersionSuite.EnsureVersionDefinesInSync
PASS: VersionSuite.EnsureRuntimeVersionAsExpected
[----------] Global test environment tear-down
[==========] 407 tests from 35 test suites ran.
[ PASSED ] 407 tests.
DURATION: 1
END: /usr/lib/uriparser/ptest
2025-12-22T19:34
STOP: ptest-runner
TOTAL: 1 FAIL: 0
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
There are two different types of tags in glslang git repo. One is the
release tag of the project itself: 15.2.0, 14.3.0, etc. The other tag is
for Vulkan SDK: vulkan-sdk-1.4.309, vulkan-sdk-1.4.304.1, etc.
The vulkan sdk tag is used for glslang in openembedded-core because it
needs to update in locksetup with vulkan, which leads to a mismatch
between the runtime version and the build version. Set CHECK_VERSION_PV
for it to skip the version check.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
bpftrace set the version by "git describe --dirty", since we have local
patch for bpftrace, '-dirty' will be added into the version, set
CHECK_VERSION_PV to mute the version mismatch warning
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* flite --version return 1 block version output for
check-version-mismatch.bbclass
* even with version output flite-2.2-current, regular version match
regexp cannot match the version
so mute version mismatch warning for flite
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It takes under 10 seconds to run the suite.
Executed succesfully on x86-64, with musl and glibc.
The recipe requires pam DISTRO_FEATURE to be present.
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It takes less than 30 seconds to execute.
Add a backported patch that fixes a broken test.
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The project has extensive runtime- and unittest suite - make use of it.
It takes around 10 seconds to run both suites.
Added two patches:
One is needed to convert python unittest output into automake output.
The other is required to be able to configure test data folder at
compile time - otherwise the tests are looking for the test-data
with absolute paths from the build machine.
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
There is a timezone related ptest that fails using musl-libc.
This has been reported to the mariadb developers[1], who came up with
the backported patch that's the subject of this change.
This patch skips the timezone related tests with musl, in case the
testcase uses a timezone that behaves differently with musl than on
other platforms.
[1]: https://jira.mariadb.org/browse/MDEV-38029
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
According to [1][2], generate phar.php during cross-compile can't be
done, but upstream test res of $(TEST_PHP_EXECUTABLE) is not suitable
for Yocto.
Explicitly set TEST_PHP_EXECUTABLE_RES = "1" to not generate phar.php
for target recipe
Drop 0005-sapi-cli-config.m4-fix-build-directory.patch which is obsolete
for generating phar.php
After apply this commit
...log.do_compile...
Generating phar.php
Skipping phar.php generating during cross compilation
Generating phar.phar
Skipping phar.phar generating during cross compilation
...log.do_compile...
Then php supports reproducible build
[1] https://github.com/php/php-src/issues/11099
[2] https://github.com/php/php-src/commit/93fa9613e162d1a0e8479ba83c4b6a399846e209
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
When compressing docs, do not save the original file name and
timestamp by default (gzip -n). Make archives be reproducible
at each build
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The tests are executing and passing fine using glibc.
It takes a bit more than 5 minutes to run them.
When using musl, the timezone tests fail due to the different ways
glibc and musl handle posix timezones. It have been reported
upstream: https://jira.mariadb.org/browse/MDEV-38029
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The logic used is :
- We check if the required tools are present or not
- We used magick to create an raw RGB file
- The created RGB is then converted to PNG using convert
- We re-gerenate RGB from PNG and compare the original and re-generated RGB
- Enabled the ptest in ptest-packagelists-meta-oe.inc as
suggested by Gyorgy Sarvari and incorporated logging suggestion
- This was done as standard imagemagick test like drawtest requires manual
internetion to verify the file
Signed-off-by: AshishKumar Mishra <ashishkumar.mishra@bmwtechworks.in>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The project is getting more mature, and it's now doable to do a yocto build using uutils-coreutils-native.
Signed-off-by: Etienne Cordonnier <ecordonnier@snap.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The tests are supposed to work now - they were not moved to the correct
ptest list with the last update.
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Here is the setting in bpftool recipe:
COMPATIBLE_HOST = "(x86_64|aarch64|riscv64).*-linux"
bpftool only support 64 bit arch, so add it into NON_MULTILIB_RECIPES
to avoid expanding lib32- variant
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
[ snip of CMakeLists.txt ]
BISON_TARGET(constexp
${CMAKE_CURRENT_LIST_DIR}/constexp.y
${GENERATED_SRC}/ce_parse.cpp
COMPILE_FLAGS "${YACC_FLAGS}")
[ end of snip ]
bison embeds full paths in its generated headers, eg:
bison -o /full/build/path/generated/example.cpp ...
The header will include:
#ifndef YY_FULL_BUILD_PATH_GENERATED_MSCGEN_LANGUAGE_HPP_INCLUDED
#define YY_FULL_BUILD_PATH_GENERATED_MSCGEN_LANGUAGE_HPP_INCLUDED
This make doxygen-src not reproducible, fix by replacing full build path
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The ocl-icd and opencl-icd-loader provide libOpenCL.so.1 rather than the
OpenCL Installable Client Driver (ICD). Rename the virtual package
accordingly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
These two packages don't provide ICD drivers at runtime. They provide
the libOpenCL.so.1. Corresponding package is selected at the build time
via the PROVIDES_virtual/opencl-icd. Drop the useless and incorrect
RPROVIDES for virtual-opencl-icd.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
bpftrace need line up with kernel architecture type,
so add it to NON_MULTILIB_RECIPES.
bpftrace must be built with the same architecture (32-bit/64-bit) as the kernel
to ensure compatibility when tracing kernel functions and using eBPF features.
Signed-off-by: Sunil Dora <sunilkumar.dora@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The current include file that stores the known non-reproducible packages
is layer dependent and that forces the user of the layers to maintain
the list of the files (for example, see AB config[0]).
By moving the exclude list to each layer.conf and extending the common
OEQA_REPRODUCIBLE_EXCLUDED_PACKAGES variable, the known non-reproducible
packages will be automatically excluded for each layer used in the
reproducibility test without any special knowledge in the test
environment.
NB: the empty list for meta-initramfs was just removed not moved.
[0]: https://git.yoctoproject.org/yocto-autobuilder-helper/tree/config.json?id=7d8933e75bdf7fb821a25617cb2dcabf1f3f8700#n322
Suggested-by: Quentin Schulz <quentin.schulz@cherry.de>
Co-Developed-by: Guillaume Swaenepoel <guillaume.swaenepoel@smile.fr>
Signed-off-by: Guillaume Swaenepoel <guillaume.swaenepoel@smile.fr>
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
jemalloc set the version by pass --with-version=${PV_LONG}, PV_LONG :=
"${PV}-171-g${SRCREV}", set match pattern for jemalloc to mute the
version mismatch warning
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Peter Marko
Etienne Cordonnier
Zeming LIU
Shilong Jiao
Jiaying Song
Khem Raj
Gyorgy Sarvari
Harish Sadineni
Guocai He
Jörg Sommer
Khem Raj
Yi Zhao
Changqing Li
Hongxu Jia
Ankur Tyagi
AshishKumar Mishra
Dmitry Baryshkov
Sunil Dora
Yoann Congal