CQID: 399299
The make install target is not parallel job
safe, but doesn't do all that much, so we
limit make to one job for that.
The make target is of the form
install: x y z
Unfortunately, z depends on y, so if z is started
before y (almost) completes, we will fail.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
Create -libs and -dbg splits to include .so and .debug
files, respectively to resolve the QA warning:
lib64-accel-ppp rdepends on lib64-accel-ppp-dev when
multilib is being used.
Signed-off-by: Aws Ismail <aws.ismail@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
As of 5.0.6, it appears that changes were introduced so that if you
compile with openldap disabled and openldap headers are not available,
then autofs fails to build.
Since autofs no longer depends on openldap, remove the dependency.
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
autoconf and automake got updates which need these changes
see patch header for details
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
Reference: http://www.spinics.net/lists/autofs/msg00139.html
Loading autofs module is #ifdef'ed in the source, so
there is no need to check for /proc (which is only used
to load module) or modprobe. Both modprobe and /proc
are always in the fixed location so there's no need to
check for these to start with.
Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
* Autofs was being inherited from systemd. This class is only
present in meta-systemd. So bitbake was giving parse error
about systemd class. So removed systemd from inherit and
removed SYSTEMD_PACKAGES and SYSTEMD_SERVICE.
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The netcat-openbsd in meta-virtualization layer has bugs.
This update version will fix "nc: Protocol no available." error.
As bruce point, we want to keep netcat in the meta-networking,
which meta-virtualization will depend on,and this patch will let
netcat-openbsd with low priority to install
Signed-off-by: Lei Yang <lei.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
"beginline" is the correct parameter name. Checksums have been updated
where necessary (i.e. if the beginning line was something other than the
default of 1).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* Update to 1.7.2
* Drop unnecessary override of do_compile
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
* Add SUMMARY
* Minor formatting/ordering tweaks
Based on a patch by Vladimir Redzhepoff <vladimir.redzhepoff@promwad.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to 2.0.10-4
* Handle hardcoded paths in initscript
* Add LIC_FILES_CHKSUM
* Set SUMMARY (which sets DESCRIPTION)
* Drop PRIORITY
* Minor formatting/ordering tweaks
Based on a patch by Vladimir Redzhepoff <vladimir.redzhepoff@promwad.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to version 1.4.0 and add additional dependencies
* Handle hardcoded paths in initscripts
* Add LSB header to initscript
* Make LICENSE more specific
* Add LIC_FILES_CHKSUM
* Set SUMMARY (which sets DESCRIPTION)
Based on a patch by Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to version 1.0.2
* Add SUMMARY and tweak DESCRIPTION
* Add HOMEPAGE
* Add dependency on libmnl
Based on a patch by Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Fix SRC_URI checksum to not be version-specific
* Refer to new COPYING file in LIC_FILES_CHKSUM (previously none was
distributed)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Changes from the OE-Classic recipe:
* Use ALTERNATIVE_${PN} instead of ALTERNATIVE_NAME
* Add LIC_FILES_CHKSUM
* Move SRC_URI checksums underneath SRC_URI
Based on a patch by Vladimir Redzhepoff <vladimir.redzhepoff@promwad.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
As of OE-Core commit id 406bd38b4232f9f399ef5ffe0b4fac72ed605a23
libexecdir has been changed to ${libdir}/${BPN}. As we are already
deleting ${libdir}/proftpd which is the same as ${libdir}/${BPN} in this
case, introduce a check to see if ${libexecdir} still exists before
attempting to remove it possibly a second time. This will handle if
libexecdir is set to its original value or a custom value in the distro
config.
Based on a patch by Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
From: Mark Hatle <mark.hatle@windriver.com>
I was helping someone with building netperf from meta-networking last
night, and stumbled on what I think is a bug.
SUMMARY = "A networking benchmarking tool"
DESCRIPTION = "Network performance benchmark including tests for TCP,
UDP, sockets, ATM and more."
SECTION = "console/network"
HOMEPAGE = "http://www.netperf.org/"
LICENSE = "netperf"
LICENSE_FLAGS = "commercial"
In the above, the LICENSE_FLAGS are set to 'commercial'. I think this
is incorrect. It should be set to 'non-commercial'.
There is a subtle difference between them which is why I think it's a
bug...
commercial -- there are some commercial requirements necessary to use
this recipe in a commercial device... you are responsible for
understanding them and doing whatever is necessary... (for
non-commercial devices you can likely use it...)
non-commercial -- this item is restricted to non-commercial users only.
As in the case of netperf, the license says it's only for
non-commercial use.
So anyway, my suggestion is to simply change the value of the flag.
Reported-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
* Update to 0.82
* Add ncurses to DEPENDS
* Add patch to fix configure with standard autotools_do_configure
* Add SUMMARY
* Add LIC_FILES_CHKSUM
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
This was originally from OE-Classic. Improvements over the OE-Classic
recipe for reference:
* Update to 1.3.4b
* Add workaround for proftpd host IP resolution
* Add initscript, borrowed from Debian with some modifications for
compatibility and handling for hardcoded paths
* Use autotools.bbclass and remove unnecessary configure options
* PARALLEL_MAKE = "" is no longer needed, the bug was fixed in 1.3.3c
* Set SUMMARY (which sets DESCRIPTION) and base it on the short
description from the website
* Use useradd.bbclass to add ftp user/group
* Add HOMEPAGE
* Add/fix description in some patches and improve recipe indentation
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
Some of this work was done by Dexuan Cui <dexuan.cui@intel.com> and
Kevin Strasser <kevin.strasser@linux.intel.com>.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to version 1.3.1
* Fetch source from a git tag as upstream apparently no longer publishes
release tarballs
* Add virtual/kernel to DEPENDS since it needs the kernel source
* Inherit update-rc.d.bbclass
* Handle hardcoded paths in initscript
* Add LIC_FILES_CHKSUM
* Set SUMMARY (which sets DESCRIPTION)
* Remove some unnecessary cruft
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to version 20
* Add LIC_FILES_CHKSUM
* Make LICENSE more accurate
* Set SUMMARY (which sets DESCRIPTION)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to 1.9.1
* Add libdaemon to DEPENDS as needed by 1.9+
* Remove empty config file (not really of much use and there's an
example config in the -doc package anyway)
* Use useradd.bbclass to create user
* Handle hardcoded paths in initscript
* Add LSB headers to initscript (borrowed from openSUSE)
* Set custom LICENSE as it's BSD-Style but not actually one of the
standard BSD variants
* Add LIC_FILES_CHKSUM
* Set SUMMARY (which sets DESCRIPTION)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to 0.99.21
* Fix SRC_URI to point to a working download location
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
* Add old gentoo patch to fix libcap linking errors
* Put binaries in sbindir
* Use useradd.bbclass to create user/groups
* Handle hardcoded paths in initscript
* Add LSB headers to initscript (borrowed from debian)
* Tidy up packaging and directory references
* Add SUMMARY
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Set SUMMARY (which sets DESCRIPTION)
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to 5.2
* Add patches from Fedora
* Add DESCRIPTION and better SUMMARY
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
* Update ALTERNATIVE_* definitions
* Handle hardcoded paths in initscript
Much of this was done by Joe MacDonald <joe.macdonald@windriver.com>.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
People can't blindly use pool.ntp.org, especially if they are building
for a product or something that could be used in a product, so at least
try to get people to do the right thing and not use pool.ntp.org by
default.
The previous network interface up script is now installed as
ntpdate-sync in ${bindir} (and symlinked as the network if-up script).
NTPSERVERS needs to be set in /etc/default/ntpdate.default at runtime,
or a different version of this file with a default value can be provided
in a bbappend. (If you intend to use ntpd you will also want to provide
an ntp.conf with the appropriate server(s) set there as well.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Joe Slater
Aws Ismail
yanjun.zhu
Randy MacLeod
Khem Raj
Martin Jansa
Amy Fong
Koen Kooi
Morgan Little
Noor Ahsan
Roy.Li
Lei Yang
Andrei Gherzan
Paul Eggleton
Joe MacDonald