* it was removed in:
https://git.openembedded.org/meta-openembedded/commit/?id=deb11a823c32d4090b3724a589641810e06df6bc
* but still needed as shown in world build without x11 in DISTRO_FEATURES:
ERROR: Nothing RPROVIDES 'projucer' (but /OE/build/luneos-nanbield/meta-openembedded/meta-multimedia/recipes-multimedia/packagegroups/packagegroup-meta-multimedia.bb RDEPENDS on or otherwise requires it)
projucer was skipped: missing required distro feature 'x11' (not in DISTRO_FEATURES)
NOTE: Runtime target 'projucer' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['projucer']
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
libcamera.so.0 and libcamera-base.so.0 are packaged in ${PN}-dev although
they should be packaged in ${PN}. See poky/meta/conf/bitbake.conf.
This trigger the following error when trying to run the `cam` utility
(packaged inside ${PN}):
$ cam -l
cam: error while loading shared libraries: libcamera.so.0: cannot open shared object file: No such file or directory
$ read-elf -d /usr/bin/cam
Dynamic section at offset 0x2c740 contains 37 entries:
Tag Type Name/Value
0x0000000000000001 (NEEDED) Shared library: [libcamera.so.0]
0x0000000000000001 (NEEDED) Shared library: [libcamera-base.so.0]
[...]
So package libcamera is broken and need to be installed along with
libcamera-dev to be functionnal. Fix it by packaging libcamera.so.0 and
libcamera-base.so.0 into ${PN}
Signed-off-by: Julien STEPHAN <jstephan@baylibre.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
(cherry picked from commit 3de996474e)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
rateconv.c looks like BSD-2 but it has second clause modified
significantly, therefore be specific about it.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit d901de434d)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
This is a bugfix release. Notably, this makes pw-dot work again - it
required workarounds via pw-dump to output a non-empty dot graph in 0.3.49.
Full changelog:
https://gitlab.freedesktop.org/pipewire/pipewire/-/releases/0.3.50
0001-meson-Add-option-to-enable-disable-legacy-RTKit-modu.patch
is no no longer needed since it has been merged and is part of 0.3.50.
Signed-off-by: Carlos Rafael Giani <crg7475@mailbox.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
(cherry picked from commit 9754901bb0)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
fluidsynth 2.2.5
* Fix a build failure with CMake < 3.12 (#1003, thanks to @komh)
* OSS and MidiShare drivers are now deprecated (#1010)
* Prevent samples accidentally having their loops disabled (#1017)
* Fix framework installation on MacOS (#1029, thanks to @pedrolcl)
Pls. note that fluidsynth 2.3.0 will require CMake >= 3.13
fluidsynth 2.2.6
* Undeprecation and minor revisal of the OSS driver (#1038)
* Minor improvements to CoreAudio and CoreMidi drivers (#1047, thanks to @bradhowes)
* Fix sustained voices being held after ALL_CTRL_OFF (#1049)
* Fix clobbering of PORTAMENTO_CTRL after ALL_CRTL_OFF (#1050)
* Prevent Modulation Envelope from being stuck in decay phase, causing detuned voices and potentially other audible glitches for some soundfonts (#1059)
* Fix a compilation issue with recent glib (#1063, thanks to @devingryu)
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This code block used to be necessary when both SDL1 and SDL2 were
supported. Nowadays, libopenmpt only supports SDL2, so drop this.
Signed-off-by: Carlos Rafael Giani <crg7475@mailbox.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog (from NEWS file):
ncmpc 0.46 - (2021-11-26)
* eliminate Boost dependency
* install Lithuanian translation
* migrate to PCRE2
DEPENDS has been updated to remove boost and add libpcre2 to match
the changes.
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog (from NEWS file):
0.34 (2021/11/30)
* add commands "albumart", "readpicture"
* don't print status after error
* custom status format
* support grouping "list" results
* meson: auto-build libmpdclient if not available
* require libmpdclient 2.16 or newer
* require MPD 0.21 or newer
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* libopenmpt-modplug got removed and now exists as a separate project.
* SDL1 is no longer supported.
Signed-off-by: Carlos Rafael Giani <crg7475@mailbox.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* Tarballs are not (yet) avaliable -> get sources from git
* bison-native is required for yacc conversion
* yacc conversion is a not easy to read and not prepared for out of tree build
To get around, use autotools-brokensep
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Auto rename performed by oe-core's convert-variable-renames.py 0.1
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
By default, the WirePlumber lua scripts try to access a session DBus, which
is not available if WirePlumber is run system wide. Add a small script
that turns off the bits that require session DBus. These involve reserving
ALSA devices (only useful in multi-user desktop setups) and Flatpak.
Also, fix the configuration file paths (WirePlumber uses /usr/share instead
of /etc) and add the correct files to CONFFILES:${PN}.
Signed-off-by: Carlos Rafael Giani <crg7475@mailbox.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
If PACKAGECONFIG contains pipewire-jack the following error was seen:
ERROR: pipewire-0.3.45-r0 do_package: QA Issue: pipewire: Files/directories were installed but not shipped in any package:
/usr/bin/pw-jack
/usr/share/pipewire/minimal.conf
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
pipewire: 2 installed and not shipped files. [installed-vs-shipped]
File /usr/bin/pw-jack is added to pipewire-jack package.
The removal of minimal.conf was conditional to not configuring 'pipewire-jack'.
Can not see any reason to make it conditional on that specific option and make
it always removed to avoid packaging error.
Errors introduced in 687483235b
Signed-off-by: Peter Bergin <peter@berginkonsult.se>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
WirePlumber is a session / policy manager for PipeWire with support
for Lua scripting and adding functionality by installing extra modules.
Signed-off-by: Carlos Rafael Giani <crg7475@mailbox.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Recipe changes:
* media-session is no longer built, since it is now a separate subproject,
and it is considered obsolete; WirePlumber is the alternative that
is recommended by upstream; see:
https://gitlab.freedesktop.org/pipewire/media-session/-/blob/d2880ed23aa6e3df7038b311145f390e4f3428ef/README.md#pipewire-media-session
* new pipewire-v4l2 package that provides a virtual V4L2; contains
a new "pw-v4l2" script to LD_PRELOAD libpw-v4l2.so
device which transmits media data from/to a PipeWire graph
* pw-top needs ncurses, which is why this is added to DEPENDS
* pw-tools contains individual binary names to be able to separate
the pw-v4l2 script from pw-tools
* libcamera and ffmpeg features are usable now
* remove unnecessary EXTRA_OEMESON switches for enabling plugins
that are already on by default
* add avahi, libcanberra, webrtc-echo-cancelling, bluez-aac, libusb
packageconfigs
* fix systemd-system-dir path and explicitly set systemd-user-dir path
Signed-off-by: Carlos Rafael Giani <crg7475@mailbox.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Enable uvcvideo, simple, and vimc pipeline handlers in libcamera. Without
any pipeline handlers libcamera can't capture any frames.
Also enable cam utility with is a cli utility that can use the library to
capture some frames.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Drop unneeded patch.
This addresses build failures with ffmpeg 5.0
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changes:
* Per-channel ALL_SOUND_OFF when seeking/stopping player (#980, thanks to @albedozero)
* Fix windows related encoding problems (#984, thanks to @tsingakbar)
* Rewind playlist when calling fluid_player_play after all loops are complete (#994, thanks to @albedozero)
* Fix MinGW related static linking issues (#990, thanks to @realnc)
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Fixes:
| ../doltlibtool: line 19: /home/superandy/tmp/oe-core-glibc/work/cortexa72-mortsgna-linux/vlc/3.0.12-r0/build/compat/../aarch64-mortsgna-linux-libtool: No such file or directory
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Drop patch for musl/aarch64 and bump source commit to latest version that
has the patch applied.
Signed-off-by: Mauro Anjo <maurosanjo@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Upgrades libcamera to latest commit, now libcamera.so is a symlink so
made changes to include all created symlinks.
Signed-off-by: Mauro Anjo <maurosanjo@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* fixes:
ERROR: Nothing RPROVIDES 'x265' (but meta-openembedded/meta-multimedia/recipes-multimedia/packagegroups/packagegroup-meta-multimedia.bb RDEPENDS on or otherwise requires it)
x265 was skipped: because it has a restricted license 'commercial'. Which is not whitelisted in LICENSE_FLAGS_WHITELIST
* also include i686 so that it's included e.g. with default DEFAULTTUNE of qemux86 as recipe allows that with:
COMPATIBLE_HOST = '(x86_64|i.86).*-linux'
i586 isn't used by qemux86 since:
commit f3b1e577ec94c849d0354f5679257f02ef4e4fe9
Author: Alexander Kanavin <alex.kanavin@gmail.com>
Date: Thu May 16 17:04:04 2019 +0200
qemux86: use a Core 2 Duo CPU instead of the original circa-1993 Pentium
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Release notes:
* FluidSynth did not build on macOS 10.5 and earlier (#946, thanks to @evanmiller)
* Fix build with CMake <3.7 (#944, thanks to @komh)
* Fix a NULL dereference in delete_fluid_ladspa_effect() (#963)
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Martin Jansa
Preeti Sachan
Khem Raj
Armin Kuster
Julien STEPHAN
Markus Volk
Carlos Rafael Giani
Andreas Müller
Scott Murray
Peter Bergin
Devendra Tewari
Peter Griffin
Ross Burton
Alexander Kanavin
Mauro Anjo