* unfortunately all 3 have very long unclear history, I've tried to at least partially
document in commit message
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Node-18 is the current LTS release, node-19 is a development release and
node-20 is scheduled to be released until 2023-04-18 which is too late for YP-4.2
https://github.com/nodejs/release
* Refresh below two patches
- 0001-Using-native-binaries.patch
- 0001-liftoff-Correct-function-signatures.patch
* Copy openssl.cnf from sysroot_native to nodejs-openssl.cnf
otherwise do_compile failed:
make[1]: *** No rule to make target '../deps/openssl/nodejs-openssl.cnf',
needed by 'Release/obj.target/deps/openssl/openssl.cnf'. Stop.
* Add initial ptest support using ctest only, it covered 20% of the nodejs tests.
There are some more tests exist to add but will require additional work.
Signed-off-by: Archana Polampalli <archana.polampalli@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* Drop Openssl legacy provider patch and install both binaries patch
which are already available in 16.x
* Refresh native binaries patch against 16.x base
Signed-off-by: Archana Polampalli <archana.polampalli@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Current nodejs version v16 does not fully support new OpenSSL, so add option
to use legacy provider.
| opensslErrorStack: [ 'error:03000086:digital envelope routines::initialization error' ],
| library: 'digital envelope routines',
| reason: 'unsupported',
| code: 'ERR_OSSL_EVP_UNSUPPORTED'
It was blindly removed by upgrade to 16.14.0 version
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Current nodejs version does not fully support new OpenSSL, so add option
to use legacy provider.
| opensslErrorStack: [ 'error:03000086:digital envelope routines::initialization error' ],
| library: 'digital envelope routines',
| reason: 'unsupported',
| code: 'ERR_OSSL_EVP_UNSUPPORTED'
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* This is new LTS release
* Add patch to fix build on mips/mips64
* Add patch to build with new c-ares 2.17+
* Enhance native binaries patch to include additional native torque use
* Drop mips-warnings.patch and python 3.10 support patch which is
already available in 16.x
* Refresh rest of patches against 16.x base
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2G is too much for qemu-mips and perhaps also for real mips devices
as we use qemu-usermode during build to run host pieces like mksnapshot
they fail, reducing the allocation range helps
Fixes
| LD_LIBRARY_PATH=/mnt/b/yoe/master/build/tmp/work/mips32r2-yoe-linux/nodejs/14.16.1-r0/node-v14.16.1/out/Release/lib.host:/mnt/b/yoe/master/build/tmp/work/mips32r2-yoe-linux/nodejs/14.16.1-r0/node-v14.16.1
/out/Release/lib.target:$LD_LIBRARY_PATH; export LD_LIBRARY_PATH; cd ../tools/v8_gypfiles; mkdir -p /mnt/b/yoe/master/build/tmp/work/mips32r2-yoe-linux/nodejs/14.16.1-r0/node-v14.16.1/out/Release/obj.target/v
8_snapshot/geni; "/mnt/b/yoe/master/build/tmp/work/mips32r2-yoe-linux/nodejs/14.16.1-r0/node-v14.16.1/out/Release/v8-qemu-wrapper.sh" "/mnt/b/yoe/master/build/tmp/work/mips32r2-yoe-linux/nodejs/14.16.1-r0/nod
e-v14.16.1/out/Release/mksnapshot" --turbo_instruction_scheduling "--target_os=linux" "--target_arch=mips" --startup_src "/mnt/b/yoe/master/build/tmp/work/mips32r2-yoe-linux/nodejs/14.16.1-r0/node-v14.16.1/ou
t/Release/obj.target/v8_snapshot/geni/snapshot.cc" --embedded_variant Default --embedded_src "/mnt/b/yoe/master/build/tmp/work/mips32r2-yoe-linux/nodejs/14.16.1-r0/node-v14.16.1/out/Release/obj.target/v8_snap
shot/geni/embedded.S" --no-native-code-counters
|
| #
| # Fatal process OOM in CodeRange setup: allocate virtual memory
| #
|
| /mnt/b/yoe/master/build/tmp/work/mips32r2-yoe-linux/nodejs/14.16.1-r0/node-v14.16.1/out/Release/v8-qemu-wrapper.sh: line 7: 2292880 Trace/breakpoint trap (core dumped) PSEUDO_UNLOAD=1 qemu-mips -r 3.2.0 -
Signed-off-by: Khem Raj <raj.khem@gmail.com>
So far, we have been trying to build nodejs-native and use the native
host binaries from there, which has worked out ok but always changes
when major upgrade is done, since more binaries or places are required
to be captured. This patch changes this approach to use qemu-user to run
these binaries under during cross build. This lets them run closer to
upstream build process and also removes dependency on nodejs-native
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This is latest maintained LTS release
Forward patches and drop backported patch
License-Update: Update copyright year and drop license of
deps/http_parser as this component is removed in this version
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Backport a patch from upstream to take care of build failure e.g.
| ../deps/v8/src/codegen/arm/cpu-arm.cc:38:16: error: write to reserved register 'R7'
| asm volatile("svc 0\n"
| ^
| 1 error generated.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Use system brotli via PACKAGECONFIG by default. So far,
nodejs had been built using its embedded copy of brotli,
which we generally try to avoid, for the known reasons
(independent updates, cve & license checks, etc).
The nodejs patches to enable this have been submitted.
brotli is in meta-oe, so enabling this by default should
not be a problem.
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
There are so many useful modules written for node.js I would like to use in
C++/Qt projects.
Run-tested both variants by installing node-red with npm and running it.
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This overrides yocto-provided build flags with its own, e.g we get
arm-poky-linux-musleabi-g++ -mthumb -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a7 \
... \
-march=armv7-a -mfpu=neon -mfloat-abi=hard -marm
Causing the latter to override the former, and compiler warnings:
cc1plus: warning: switch '-mcpu=cortex-a7' conflicts with '-march=armv7-a' switch
Patch this out, so that yocto-provided flags take precedence.
Note that in reality the same should probably be done for all the other
supported architectures, too.
Note that this also switches to Thumb(2) mode (in my case). No obvious
problems have been noted during compilation or runtime.
Upstream-Status: Inappropriate [oe-specific]
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
NodeJS comes with an embedded, patched, version of gyp.
Normally, gyp supports compiling for the build machine, e.g.
native tools that need to be compiled to run during the build,
and for the host, using different variables, e.g. CC and
CC.host, etc.
Most of this has been patched out in the NodeJS version of gyp,
and essentially it only supports compiling using one compiler -
${CC}. This modification excludes LDFLAGS for native tools, and
those still evaluate LDFLAGS.host (only).
While this modified behaviour is OK for the OE use-case of building
native and target tools separately, it means that this recipe can
not work as-is with standard gyp, and wrong LDFLAGS are being used
for some of the tools compiled (torque) in either case.
By setting the make variables that gyp-generated makefiles inspect,
we support use of unpatched gyp, and we ensure that all tools
are compiled with correct LDFLAGS in either case.
This now also allows us to drop the patch that had been applied to
work-around this problem.
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
GCC 4.8 compatibility was lost moving from 10.15.1 to 10.15.3. Add
another wrapper for std::make_unique to restore it.
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
- do not drop target LDFLAGS
- even if the target LDFLAGS have been specified, tools like torque was
linked with system libraries
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
- replace all occurrences of std::make_unique with wrapper
- sync indent level
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Update nodejs to active 10.x LTS release 10.15.1.
- link atomic library
- make it compatible with gcc < 4.9
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Remove old nodejs4_0.4.12 and update nodejs_0.12.7 to the latest stable
nodejs_4.2.3.
Nodejs is picky about which architectures it supports. The supported arch
mapping required some updating to bring it up to date with the current nodejs
code. Add COMPATIBLE_MACHINE entries so it only builds for the supported
architectures.
ARM cores that don't support at least VFP2 have been dropped:
https://groups.google.com/forum/#!topic/v8-users/aSOFbaAQvMk
"Due the increasing cost of the keeping the "no-VFPv2" port of V8 working
on ARM, we are planning on making 3.17 the last V8 release that that
supports ARM chips without VFPv2. Starting with the 3.18 release, the
minimal V8 requirements will increase to ARMv6 + VFPv2. In order to
simplify maintenance, we will also remove the "pre-VFP2" ARM code from the
V8 code base."
Additionally, gcc no longer supports a VFPv2 option:
https://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html#index-mfpu-1460
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Polampalli, Archana
Khem Raj
Martin Jansa
Andrej Valek
Zoltán Böszörményi
Alexander Kanavin
André Draszik
Guillaume Burel
Andreas Müller
André Draszik
Adrian Bunk
Brad Bishop
Jonathan Liu
Trevor Woerner
Martin Jansa
Koen Kooi
Otavio Salvador
Stefan Schmidt