Replace references of WORKDIR with UNPACKDIR where it makes sense to do
so in preparation for changing the default value of UNPACKDIR.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
- The docker image used for CI and release builds is now based on
Debian 12 instead of Ubuntu 18.04.
- macOS: CI and release builds are now generated for the x86_64 and arm64
targets. 32 bit platforms will require to be compiled from the source.
- smartctl '-t short', '-t long' and '-X': NVMe support.
- smartctl '-l selftest': NVMe support.
- smartctl '-l farm': Prints Seagate's vendor-specific Field Access
Reliability Metrics (FARM) log for ATA and SCSI drives.
- smartctl '-l error': Now also prints an error message for each entry
of NVMe error information log.
- smartctl '-l genstats': Prints SCSI General statistics and performance
log page.
- smartctl '-i' and '--identify': ACS-4/5/6 enhancements.
- smartctl '-c': Added NVMe 2.0 capability flags.
- smartctl '-g security': Added 'ata_security.master_password_id'
to JSON output. Plaintext output shows Master Password ID if set
to a non-default value.
- smartctl '-q noserial': Now also suppresses the output of NVMe Namespace
IEEE EUI-64.
- smartctl '-j': '-l error -l selftest' JSON output for NVMe devices.
- smartctl '-j': Avoid invalid UTF-8 sequences in JSON/YAML strings.
- smartctl '-j': Fixed a bogus exception during SCSI JSON output.
- smartctl '-j': Renamed JSON element 'scsi_temperature' back to
'temperature' (regression).
- smartctl '-a': Now suggests '-x' for ATA devices because '-a' only
provides legacy SMART information.
- smartd: No longer issues LOG_CRIT warnings if new entries of NVMe error
information log do not indicate device problems.
- smartd: Now detects accidental use of smartd_warning script as
'-M exec' parameter.
- smartd: No longer writes the 'Copyright...' line to syslog.
- smartd.conf '-M always': Sends reminder emails without any delay.
- smartd.conf '-M diminishing': Limited email delay to 32 days.
- ATA: Fixed decoding of extended self-test log on big endian hosts.
- ATA: Enhanced LBA range for device types '-d jmb39x-q,...' and
'-d jms56x,...' from 33-62 to 1-255.
- ATA: Device type '-d intelliprop,N' now fails with a deprecation message.
Added '-d intelliprop,N,force' flag to use it anyway.
- ATA/USB: Device type '-d usbasm1352r,N' for ASMedia ASM1352R USB to SATA
RAID bridges
- SCSI: Fixed possible corruption issue with the Error Counter and
Non medium Error log pages.
- SCSI: Added more "Informational Exceptions" strings.
- SCSI: Added initial support for REPORT SUPPORTED OPERATION command.
- SCSI: Initial rework of SCSI debug output.
- NVMe: Added error messages for NVMe status values.
- NVMe: Fixed crash after read of error information log on big endian hosts.
- HDD, SSD and USB additions to drive database.
- update-smart-drivedb: Fixed syntax for 'sed' versions which require
';' before '}' or do not support ';' at all.
- update-smart-drivedb: Replaced a usually not executed bashism.
- configure: Default for '--with-nvme-devicescan' is now 'yes' also on
Darwin and FreeBSD. It is still 'no' on NetBSD only.
- configure: Defines '_FORTIFY_SOURCE=3' if supported and not predefined.
- configure: No longer fails if libsystemd-dev is installed and
'LDFLAGS=-static' is used.
- Compile fix for systems without legacy 'getdtablesize()'.
- Pre-releases from SVN snapshots now show "pre-VERSION" in version
information and 'smartctl.pre_release=true' in JSON output.
- Linux: Device type '-d sssraid' for 3SNIC RAID controllers.
- Linux: Device type '-d marvell' now fails with a deprecation message.
Added '-d marvell,force' flag to use it anyway.
- Linux: The generic SCSI code now defaults to SG_IO_V3 and does no
longer fall back to the deprecated SCSI_IOCTL_SEND_COMMAND
(but this ioctl is still used for '-d 3ware' and '-d marvell,force').
- Linux smartd: Now prevents systemd unit startup timeout when many
devices are registered and then initially checked.
- Linux smartd: Systemd no longer reports a service failure if no device
is present and a '-q *nodev0*' option is used.
- Solaris SPARC: Dropped legacy ATA support. Dropped configure option
'--with-solaris-sparc-ata'.
- Windows: IOCTL_STORAGE_PROTOCOL_COMMAND variant for NVMe self-tests.
- Windows: Installer now defaults to 64-bit executables.
- Windows: No longer prints bogus 'Local Time' if enhanced TZ syntax is used.
- Windows: Workaround to keep backward compatibility with old versions
of Windows if some versions of MinGW-w64 are used.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
0001-configure.ac-Define-SOURCE_DATE_EPOCH-in-CPPFLAGS.patch
refreshed for new version.
Changelog:
=========
- smartctl '-j': Many additions to the JSON output for SCSI/SAS devices.
- smartctl '-j': JSON output always includes timestamp, regardless of '-i'.
- smartctl '-i' and '--identify': ATA ACS-5 enhancements.
- smartctl '-l defects': additionally works for SCSI Pending Defects log
subpage.
- smartctl '-l envrep': Prints SCSI Environmental Reporting log subpage.
- smartctl '-l scterc[,R,W],p': Gets/sets the persistent power-on values.
- smartctl '-l scterc,reset': Restores to manufacturer's default values.
- smartctl '-l tapedevstat': Prints SCSI Tape Device Statistics log page.
- smartctl '-l tapealert': Prints SCSI Tape Alert log page.
- smartctl '-l zdevstat': Prints SCSI Zoned Block Device Statistics log
subpage.
- smartctl '-H': No longer checks and clears the SCSI Tape Alert log page
unless the option is given twice.
- smartctl '-H': No longer sets bit 2 of exit status if ATA attributes are
available.
- smartctl '-H': Checks new NVME 1.4 status bit.
- smartctl '-n POWERMODE': ATA: Optionally exits immediately if unsupported.
- smartctl: Support for Zoned block device characteristics and statistics.
- smartctl: Various fixes related to SCSI supported log pages and subpages.
- smartd: Fixed code execution vulnerability in conjunction with
GNU mailutils < 3.13.
- smartd '-u USER[:GROUP]': Runs the warning script as a non-privileged user.
- smartd '--capabilities': No longer suppresses mail notification.
- smartd '--capabilities=mail': Adds capabilities required for exim MTA.
- smartd '-q *nodev0*': Three new options to change the exit status to 0 if
there are no devices to monitor.
- smartd '-s' and '-A': Allows one to disable preconfigured files with '-'.
- smartd: Fixed handling of multiple email addresses in conjunction with
plugin scripts. Added new environment variable SMARTD_ADDRESS_ORIG.
- smartd: No longer writes 'smartd -D' output to syslog on syntax error.
- smartd.conf '-c i=N': Allows one to specify device specific check intervals.
- SCSI: Retry on UNIT ATTENTION when fetching capacity.
- NVMe/USB: Device type '-d sntasmedia' for ASMedia ASM2362 USB to
NVMe bridges.
- VERSION information in drive database files of all branches.
- smartctl and smartd print drive database VERSION information.
- HDD, SSD and USB additions to drive database.
- update-smart-drivedb: Now checks VERSION information to prevent downgrades.
- update-smart-drivedb '--force': Overrides the VERSION check.
- update-smart-drivedb '--file' and '--url': Updates from local files or
other URLs.
- update-smart-drivedb '-q': Suppresses info messages.
- update-smart-drivedb: Added long option variants for all short options.
- update-smart-drivedb: Prevents dangling gpg-agents and temp directories.
- update-smart-drivedb '--install': Installs runtime drivedb.h from location
specified by ...
- configure '--with-drivedbinstdir: drivedb.h package install location.
- configure: SOURCE_DATE_EPOCH prevents inclusion of configure arguments
in executables.
- configure: Check for '-fstack-protector' now includes the required libs.
- Dropped restriction to C++98, a C++11 compiler is now required.
- Linux: Device scan range enhanced to '/dev/sdzz'.
- Linux: Fixed access to '-d aacraid' and '-d megaraid' devices from smartd
if '--capabilities' is used.
- Linux: '-d cciss,N' is no longer required for non-RAID hpsa devices.
- Darwin: smartctl '-s apm,N' is now supported.
- OpenBSD: Fixed too short command timeouts.
- OpenBSD: Fixed device name used for autodetection.
- OpenBSD: Fixed SAT autodetection of sd* devices.
- FreeBSD: Added direct access ('-d megaraid,N') and scanning for LSI RAID on
'mfi' and 'mrsas' controllers.
- Windows: smartd '-u restricted': Runs the warning script with a restricted
access token.
- Windows: New script 'update-smartd-drivedb.ps1' provides gpg verification
and replaces 'update-smartd-drivedb.exe'.
- Windows: Disabled '-d aacraid' support due to unresolved bugs.
Added '-d accraid,...,force' flag to try anyway.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
As mailx is unmaintained, depend on s-nail instead of mailx.
Also recommend instead of depend, so you don't need to send email.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This is the result of automated script (0.9.1) conversion:
oe-core/scripts/contrib/convert-overrides.py .
converting the metadata to use ":" as the override character instead of "_".
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
base_contains() is a compatibility wrapper and may warn in the future, so
replace all instances with bb.utils.contains().
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add systemd service file for smartmontools.
The service is disabled by default.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Changes include:
1. Make it run at runlevel 2, 3, 4 and 5 by default.
2. Add /etc/default/smartmontools, just as Ubuntu does.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add PACKAGECONFIGs libcap-ng and selinux for smartmontools. And add
runtime dependency.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add init script smartd for smartmontools. Thought smartmontools provides
init script itself, but it checks distribution version that is not usable
for oe.
So add an init script for smartmontools which removes distribution
version check.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Changes:
- rename SUMMARY with length > 80 to DESCRIPTION
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Khem Raj
Wang Mingyu
Martin Jansa
Ross Burton
Oleksiy Obitotskyy
zangrc
Mingli Yu
Wang Mingyu
Changqing Li
Huang Qiyu
Peter Kjellerstedt
Wang Xin
Ross Burton
Li xin
Chen Qi
Kang Kai
Matthieu CRAPET
Nicolas Dechesne