Replace references of WORKDIR with UNPACKDIR where it makes sense to do
so in preparation for changing the default value of UNPACKDIR.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This CVE is fixed in 3.38.1, however cve-check indicates it as
not fixed because there is also cpe for premium version.
There is currently no method to filter this away in cve-check.
Relevant CPEs:
cpe:2.3:a:oneidentity:syslog-ng:*:*:*:*:-:*:*:* < 3.38.1
cpe:2.3:a:oneidentity:syslog-ng:*:*:*:*:premium:*:*:* < 7.0.32
Signed-off-by: Peter Marko <peter.marko@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
syslog-ng-update-virtualenv causes install conflict when multilib
enabled:
Error: Transaction test error:
file /usr/bin/syslog-ng-update-virtualenv conflicts between attempted
installs of lib32-syslog-ng-4.0.1-r0.core2_32 and syslog-ng-4.0.1-r0.core2_64
Since python support is disabled, not deliver it.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
For now syslog-ng segfaults on ppc64le. The problem could be reproduced
by simply adding syslog-ng to IMAGE_INSTALL and then building and starting
an image for qemuppc64.
The underlying root cause is unknown yet. This workaround, on the other hand,
helps improve the situation a little bit in the sense that users can at least
use syslog-ng on ppc64le targets.
Note that this workaround should be dropped once the upstream issues[1][2]
are fixed. This has also stated very clearly in the patch.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=30062
[2] https://github.com/syslog-ng/syslog-ng/issues/4285
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
License-Update:
Add description to intention with the choice of licenses and the location of a license file.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The service warned on startup about running in compatibility mode since the configuration version was "3.31" instead of "3.36".
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Drop two patches that are upstream now:
90459087f scl: fix wrong ownership during installation
c1054d3f6 python: s/python/python3/ shebang (exclude tests)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Commit [1] changed the pidfile dir to /var/run/syslog-ng. This also changed
the location where the control socket is searched for, causing the following
error with systemd:
root@qemux86-64:~# syslog-ng-ctl config
Error connecting control socket, socket='/var/run/syslog-ng/syslog-ng.ctl',
error='No such file or directory'
Update the systemd service file to point to the new location.
[1] 00d1d63e4f ("syslog-ng: provide correct PID directory location to
restart/stop syslog-ng daemon")
Signed-off-by: lmorales <luisalejandro.moralespena@windriver.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This is the result of automated script (0.9.1) conversion:
oe-core/scripts/contrib/convert-overrides.py .
converting the metadata to use ":" as the override character instead of "_".
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
There is only one version of the recipe, and a number of URLs were
unnecessarily duplicated in the .inc file and the .bb file.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
libnet is a dependency to --enable-spoof-source.
The correct flag to enable/disable in ./configure
is --enable-spoof-source.
Adjust PACKAGECONFIG accordingly.
Signed-off-by: Yi Fan Yu <yifan.yu@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
when enabling DEBUG_BUILD, an assembler failure used to be seen.
But this patch was in meta-oe c0ce7599, dating in 2014...
Cannot reproduce the failure anymore with qemuarm.
Signed-off-by: Yi Fan Yu <yifan.yu@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Also remove unnecessary slashes before ${sysconfdir} and
${localstatedir}.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
[2020-02-16T22:13:56.331425] WARNING: Configuration file format is too old, syslog-ng is running in compatibility mode. Please update it to use the syslo
g-ng 3.24 format at your time of convenience. To upgrade the configuration, please review the warnings about incompatible changes printed by syslog-ng, a
nd once completed change the @version header at the top of the configuration file
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
systemd requires volatile file/directory specifications to
be in a tmpfiles.d directory. We put ours in /etc/tmpfiles.d.
Also eliminate SRC_URI duplication in .bb and .inc files.
Signed-off-by: Joe Slater <joe.slater@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Multiple -dbg packages per recipe is not encouraged, and only one is
recommended and the code only works properly in some cases for one.
Add RPROVIDES_${PN}-dbg to be compatiable with previous dbg packages
requiring.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
service start failed since segment fault on arch arm64,
syslog-ng have a submodule ivykis, from ivykis V0.42,
it use pthread_atfork, but for arm64, this symbol is
not included by libpthread, so cause segment fault.
refer systemd, replace pthread_atfork with __register_atfork
to fix this problem.
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
1. Fix syslog-ng service cannot startup after upgrade to 3.15.1
1) Align path of syslog-ng.conf between syslog-ng@default
and do_install in syslog-ng.inc
2) create a default instance for syslog-ng
3) Install default parameter file to /etc/default according
to https://github.com/balabit/syslog-ng/commit
/649d1151e79033cc2b81b3353917507266814436
2. Fix "Failed to acquire /run/systemd/journal/syslog socket,
disabling systemd-syslog source;" accordint to below content
from syslog-ng admin guide.
1) for linux, If the host is running under systemd, syslog-ng
OSE reads directly from the systemd journal file using the
systemd-journal() source.
2) If possible, use the more reliable systemd-journal() driver
instead.
3) The socket activation of systemd is buggy, causing some log
messages to get lost during syst
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Only include conf files that need json if it is enabled
when building syslog-ng.
Signed-off-by: Joe Slater <joe.slater@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
- Refresh and remove obsolete patches
- Fix PAGESIZE variable conflicting
- PAGESIZE is a define in some libc libraries
- Implement SystemD service files handling
- splitted service into default
- Remove dependency to eventlog
- external libevtlog library linking was removed
- Version 3.15.1 supports OpenSSL 1.1
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Marko Pater <peter.marko@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
WARNING: syslog-ng-3.8.1-r0 do_patch:
Some of the context lines in patches were ignored. This can lead to incorrectly applied patches.
The context lines in the patches can be updated with devtool:
devtool modify <recipe>
devtool finish --force-patch-refresh <recipe> <layer_path>
Then the updated patches and the source tree (in devtool's workspace)
should be reviewed to make sure the patches apply in the correct place
and don't introduce duplicate lines (which can, and does happen
when some of the context is ignored). Further information:
http://lists.openembedded.org/pipermail/openembedded-core/2018-March/148675.htmlhttps://bugzilla.yoctoproject.org/show_bug.cgi?id=10450
Details:
Applying patch configure.ac-add-option-enable-thread-tls-to-manage-.patch
patching file configure.ac
Hunk #1 succeeded at 147 with fuzz 2 (offset 27 lines).
Hunk #2 succeeded at 489 (offset 105 lines).
Now at patch configure.ac-add-option-enable-thread-tls-to-manage-.patch
Signed-off-by: Armin Kuster <akuster808@gmail.com>
If "--with-pidfile-dir" configure option is not specified, then the syslog-ng
configure script assigns PID directory to /var/lib/syslog-ng; which is
where the PID file of syslog-ng process is created. But the syslog-ng
initscript (/etc/init.d/syslog-ng) uses /var/lib/syslog-ng/
as PID directory, this results in not stopping/restarting syslog-ng daemons
when it was requested to do so.
For example:
-- snip --
root@qemux86:~# /etc/init.d/syslog status
/usr/sbin/syslog-ng (pid 345 344) is running...
root@qemux86:~# /etc/init.d/syslog stop
Stopping syslog-ng:.
root@qemux86:~# /etc/init.d/syslog status
/usr/sbin/syslog-ng (pid 345 344) is running...
root@qemux86:~#
-- snip --
Hence set --with-pidfile-dir to "/var/run/syslog-ng", so that syslog-ng daemon
can be stopped/restarted via initscript.
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The backtick as a special character causes a syntax error by the parser
in comment line:
Error performing backtick substitution in configuration file;
error='missing closing backtick (`) character',
filename='/etc/syslog-ng/syslog-ng.conf', line='55:1'
Replace it with single quote and bump the conf version to 3.8.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* The upstream has changed to github.com.
* Remove patches that are no longer needed:
- Fix-the-memory-leak-problem-for-mutex.patch
- configure.patch
- dbifix.patch
- fix-a-memory-leak-in-log_driver_free.patch
* Update syslog-ng.service-the-syslog-ng-service.patch
* openssl is no longer optional, so remove its PACKAGECONFIG.
* Add (disabled) PACKAGECONFIGs for the new http and native modules.
* Disable the new python and java modules.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
syslog-ng has sub-projects with their own autotools configurations.
Something has been messed up after the switch to RSS and now it
requires autoreconf to be run twice to fully update all files.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
J. S.
Khem Raj
Martin Jansa
Peter Marko
Changqing Li
Kai Kang
Chen Qi
wangmy
Aurélien Bertron
Randy MacLeod
Ovidiu Panait
Peter Kjellerstedt
Yi Fan Yu
Wenlin Kang
Ola X Nilsson
Slater, Joseph
Jeremy Puhlman
zhangxiao
Zheng Ruoqin
Zang Ruochen
Hongxu Jia
Andrej Valek
Yi Zhao
Armin Kuster
Jagadeesh Krishnanjanappa
Andre McCurdy