For now syslog-ng segfaults on ppc64le. The problem could be reproduced
by simply adding syslog-ng to IMAGE_INSTALL and then building and starting
an image for qemuppc64.
The underlying root cause is unknown yet. This workaround, on the other hand,
helps improve the situation a little bit in the sense that users can at least
use syslog-ng on ppc64le targets.
Note that this workaround should be dropped once the upstream issues[1][2]
are fixed. This has also stated very clearly in the patch.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=30062
[2] https://github.com/syslog-ng/syslog-ng/issues/4285
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The service warned on startup about running in compatibility mode since the configuration version was "3.31" instead of "3.36".
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Drop two patches that are upstream now:
90459087f scl: fix wrong ownership during installation
c1054d3f6 python: s/python/python3/ shebang (exclude tests)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Commit [1] changed the pidfile dir to /var/run/syslog-ng. This also changed
the location where the control socket is searched for, causing the following
error with systemd:
root@qemux86-64:~# syslog-ng-ctl config
Error connecting control socket, socket='/var/run/syslog-ng/syslog-ng.ctl',
error='No such file or directory'
Update the systemd service file to point to the new location.
[1] 00d1d63e4f ("syslog-ng: provide correct PID directory location to
restart/stop syslog-ng daemon")
Signed-off-by: lmorales <luisalejandro.moralespena@windriver.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
libnet is a dependency to --enable-spoof-source.
The correct flag to enable/disable in ./configure
is --enable-spoof-source.
Adjust PACKAGECONFIG accordingly.
Signed-off-by: Yi Fan Yu <yifan.yu@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
when enabling DEBUG_BUILD, an assembler failure used to be seen.
But this patch was in meta-oe c0ce7599, dating in 2014...
Cannot reproduce the failure anymore with qemuarm.
Signed-off-by: Yi Fan Yu <yifan.yu@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
[2020-02-16T22:13:56.331425] WARNING: Configuration file format is too old, syslog-ng is running in compatibility mode. Please update it to use the syslo
g-ng 3.24 format at your time of convenience. To upgrade the configuration, please review the warnings about incompatible changes printed by syslog-ng, a
nd once completed change the @version header at the top of the configuration file
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
systemd requires volatile file/directory specifications to
be in a tmpfiles.d directory. We put ours in /etc/tmpfiles.d.
Also eliminate SRC_URI duplication in .bb and .inc files.
Signed-off-by: Joe Slater <joe.slater@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
service start failed since segment fault on arch arm64,
syslog-ng have a submodule ivykis, from ivykis V0.42,
it use pthread_atfork, but for arm64, this symbol is
not included by libpthread, so cause segment fault.
refer systemd, replace pthread_atfork with __register_atfork
to fix this problem.
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
1. Fix syslog-ng service cannot startup after upgrade to 3.15.1
1) Align path of syslog-ng.conf between syslog-ng@default
and do_install in syslog-ng.inc
2) create a default instance for syslog-ng
3) Install default parameter file to /etc/default according
to https://github.com/balabit/syslog-ng/commit
/649d1151e79033cc2b81b3353917507266814436
2. Fix "Failed to acquire /run/systemd/journal/syslog socket,
disabling systemd-syslog source;" accordint to below content
from syslog-ng admin guide.
1) for linux, If the host is running under systemd, syslog-ng
OSE reads directly from the systemd journal file using the
systemd-journal() source.
2) If possible, use the more reliable systemd-journal() driver
instead.
3) The socket activation of systemd is buggy, causing some log
messages to get lost during syst
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
- Refresh and remove obsolete patches
- Fix PAGESIZE variable conflicting
- PAGESIZE is a define in some libc libraries
- Implement SystemD service files handling
- splitted service into default
- Remove dependency to eventlog
- external libevtlog library linking was removed
- Version 3.15.1 supports OpenSSL 1.1
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Marko Pater <peter.marko@siemens.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
WARNING: syslog-ng-3.8.1-r0 do_patch:
Some of the context lines in patches were ignored. This can lead to incorrectly applied patches.
The context lines in the patches can be updated with devtool:
devtool modify <recipe>
devtool finish --force-patch-refresh <recipe> <layer_path>
Then the updated patches and the source tree (in devtool's workspace)
should be reviewed to make sure the patches apply in the correct place
and don't introduce duplicate lines (which can, and does happen
when some of the context is ignored). Further information:
http://lists.openembedded.org/pipermail/openembedded-core/2018-March/148675.htmlhttps://bugzilla.yoctoproject.org/show_bug.cgi?id=10450
Details:
Applying patch configure.ac-add-option-enable-thread-tls-to-manage-.patch
patching file configure.ac
Hunk #1 succeeded at 147 with fuzz 2 (offset 27 lines).
Hunk #2 succeeded at 489 (offset 105 lines).
Now at patch configure.ac-add-option-enable-thread-tls-to-manage-.patch
Signed-off-by: Armin Kuster <akuster808@gmail.com>
The backtick as a special character causes a syntax error by the parser
in comment line:
Error performing backtick substitution in configuration file;
error='missing closing backtick (`) character',
filename='/etc/syslog-ng/syslog-ng.conf', line='55:1'
Replace it with single quote and bump the conf version to 3.8.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* The upstream has changed to github.com.
* Remove patches that are no longer needed:
- Fix-the-memory-leak-problem-for-mutex.patch
- configure.patch
- dbifix.patch
- fix-a-memory-leak-in-log_driver_free.patch
* Update syslog-ng.service-the-syslog-ng-service.patch
* openssl is no longer optional, so remove its PACKAGECONFIG.
* Add (disabled) PACKAGECONFIGs for the new http and native modules.
* Disable the new python and java modules.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Upgrade syslog-ng from 3.5.4.1 to 3.6.4.
1) Modify the syslog-ng.service-the-syslog-ng-service.patch,since the datas has been changed.
2) Delete these patches,since they are not needed any more.
afsql-afsql_dd_insert_db-refactor.patch
deinit-the-new-config-when-reverting-to-the.patch
free-global-LogTemplateOptions.patch
still-free-the-unconsumed-item.patch
syslog-ng-verify-the-list-before-del.patch
rewrite-expr-grammar.ym-Free-up-token.patch
logwriter-dont-allocate-a-new-buffer.patch
3) Fix WARNING:
QA Issue: syslog-ng-libs rdepends on libpcre, but it isn't a build dependency? [build-deps]
QA Issue: syslog-ng rdepends on libpcre, but it isn't a build dependency? [build-deps]
4) Fix ERROR: QA Issue: non -staticdev package contains static .a library:
work/i586-poky-linux/syslog-ng/3.6.4-r0/packages-split/syslog-ng/usr/lib/syslog-ng/libtest/libsyslog-ng-test.a' [staticdev]
Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1) modified "--localstatedir" from /var/run to /var/lib
2) delete "Type=notify" from syslog-ng.service.
Otherwise syslog-ng.service can't be start successfully.
Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The thread local storage caused arm-gcc broken while compiling
syslog-ng with option '-g -O'.
...
dnscache.s: Assembler messages:
dnscache.s💯 Error: invalid operands (.text and *UND* sections) for `-'
...
Add option --enable-thread-tls in configure to explicitly disable
thread local storage for arm while DEBUG_BUILD enabled.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The previous configure.patch can't be applied by older "patch" tool
since the line number is incorrect, for example, the "patch 2.5.4" on
CentOS 5.10.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The messages echoed when starting and stopping syslog-ng are currently
printed regardless of the setting of VERBOSE. Adjust the initscript so
they're only printed when VERBOSE is enabled.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
- initscript: add status, PIDFILE and xconsole
- syslog-ng.conf: dump the version
- Fix some memory leak problems we found
- Some backport patches
- scl: fix wrong ownership issue
- libnet: add libnet enable option and add it in PACKAGECONFIG
- add HOMEPAGE
- remove INC_PR
- change some config into PACKAGECONFIG
- add PACKAGE syslog-ng-libs to fix QA issue
- use volatiles
- inherit update-rc.d and update-alternative
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* this set does not build with distroless qemuarm as reported in
'State of bitbake world' thread, nobody volunteered to fix them
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
J. S.
Peter Marko
Changqing Li
Martin Jansa
Chen Qi
Aurélien Bertron
Randy MacLeod
Ovidiu Panait
Yi Fan Yu
Slater, Joseph
Jeremy Puhlman
Zheng Ruoqin
Andrej Valek
Armin Kuster
Yi Zhao
Peter Kjellerstedt
Andre McCurdy
Dai Caiyun
Li xin
Xufeng Zhang
Hongxu Jia
Robert Yang
Richard Tollerton
Richard Purdie
Jackie Huang
Michael Lippautz