Upgrade to release 1.6.11:
Broker:
- Fix usage message only mentioning v3.1.1.
- Fix broker refusing to start if only websockets listeners were
defined.
- Change systemd unit files to create /var/log/mosquitto before
starting.
- Don't quit with an error if opening the log file isn't possible.
- Fix bridge topic remapping when using "" as the topic.
- Fix messages being queued for disconnected bridges when clean
start was set to true.
- Fix `autosave_interval` not being triggered by messages being
delivered.
- Fix websockets clients sometimes not being disconnected promptly.
- Fix "slow" file based logging by switching to line based
buffering.
- Log protocol error message where appropriate from a bad
UNSUBSCRIBE, rather than the generic "socket error".
- Don't try to start DLT logging if DLT unavailable, to avoid a
long delay when shutting down the broker.
- Fix potential memory leaks.
- Fix clients not receiving messages after a previous client with
the same client ID and positive will delay interval quit.
- Fix overly broad HAVE_PTHREAD_CANCEL compile guard.
Client library:
- Improved documentation around connect callback return codes.
- Fix `mosquitto_publish*()` no longer returning
`MOSQ_ERR_NO_CONN` when not connected.
- `mosquitto_loop_start()` now sets a thread name on Linux,
FreeBSD, NetBSD, and OpenBSD.
- Fix `mosquitto_loop_stop()` not stopping on Windows.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Strip host path infomation out of binaries by not suppressing
default CFLAGS.
Signed-off-by: Joe Slater <joe.slater@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
clang11 and gcc10 have switched to using -fno-common by default this
hoowever still needs to use -fcommon until fixed
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It fails to compile rdist occasionally when system load of build server
is high:
| In file included from common.c:57:
| ../include/defs.h:49:10: fatal error: y.tab.h: No such file or directory
| 49 | #include "y.tab.h"
| | ^~~~~~~~~
| compilation terminated.
Make $(COMMONOBJS) which include common.o to depends on related header files
and y.tab.h to fix the parallel build failure.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This is a security release in order to address the following defects:
CVE-2020-10730: NULL pointer de-reference and use-after-free in Samba AD
DC LDAP Server with ASQ, VLV and paged_results.
CVE-2020-10745: Parsing and packing of NBT and DNS packets can consume
excessive CPU
CVE-2020-10760: LDAP Use-after-free in Samba AD DC Global Catalog with
paged_results and VLV.
CVE-2020-14303: Empty UDP packet DoS in Samba AD DC nbtd.
Also backport 3 patches to fix build error with musl.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
netoprintf() was not handling a case where
return value of vsnprintf is greater than
"size"(2nd argument), results in buffer overflow
while adjusting "nfrontp" pointer to point
beyond "netobuf" buffer.
Here is one such case where "nfrontp"
crossed boundaries of "netobuf", and
pointing to another global variable.
(gdb) p &netobuf[8255]
$5 = 0x55c93afe8b1f <netobuf+8255> ""
(gdb) p nfrontp
$6 = 0x55c93afe8c20 <terminaltype> "\377"
(gdb) p &terminaltype
$7 = (char **) 0x55c93afe8c20 <terminaltype>
(gdb)
This resulted in crash of telnetd service
with segmentation fault.
Signed-off-by: Julius Hemanth Pitti <jpitti@cisco.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
When starting radvd without any configuration the following errors would
be triggered.
"""
root@intel-x86-64:~# systemctl status radvd
● radvd.service - Router advertisement daemon for IPv6
Loaded: loaded (/lib/systemd/system/radvd.service; enabled; vendor preset:
enabled)
Active: inactive (dead)
Condition: start condition failed at Tue 2019-09-24 13:29:36 UTC; 3s ago
└─ ConditionPathExists=/etc/radvd.conf was not met
"""
Normally the user should create and configrue the /etc/radvd.conf
manually. However the radvd provide a example file for redhad located
at "radvd/redhat/radvd.conf.empty". When installing, it would copy
radvd/redhat/radvd.conf.empty to /etc/radvd.conf. Also add this empty
conf here to used as an example of configuration
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
nmcli depends on libreadline which is licensed under GPLv3.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Fixes the occasional error:
# cd /etc/raddb/certs
# ./bootstrap
[snip]
openssl ca -batch -keyfile ca.key -cert ca.pem -in client.csr -key 'whatever' -out client.crt -extensions xpclient_ext -extfile xpextensions -config ./client.cnf
Using configuration from ./client.cnf
Check that the request matches the signature
Signature ok
ERROR:There is already a certificate for /C=FR/ST=Radius/O=Example Inc./CN=user@example.org/emailAddress=user@example.org
The matching entry has the following details
Type :Valid
Expires on :200908024833Z
Serial Number :02
File name :unknown
Subject Name :/C=FR/ST=Radius/O=Example Inc./CN=user@example.org/emailAddress=user@example.org
make: *** [Makefile:128: client.crt] Error 1
Add the check to fix the above error and it does the same for server.crt.
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Fixed when rebuild:
DEBUG: Executing shell function autotools_preconfigure
NOTE: make clean
aclocal
autoheader
autoconf
You need to call ./configure with appropriate arguments (again).
make: *** [Makefile:287: config.status] Error 1
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Since networkmanager: upgrade 1.22.10 -> 1.22.14, it added a new
build option 'firewalld-zone', while enabling multilib, there is
a QA issue
...
ERROR: QA Issue: networkmanager: Files/directories were installed but not shipped in any package:
/usr/lib/firewalld
/usr/lib/firewalld/zones
/usr/lib/firewalld/zones/nm-shared.xml
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
- removed B = "${S}", which is the default anyway
- removed FILES_${PN} =+ "${bindir}",
as it's already covered by ${PN}-bin package
Signed-off-by: Konrad Weihmann <kweihmann@outlook.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Colin McAllister
Leon Anavi
Khem Raj
Slater, Joseph
Zang Ruochen
Mingli Yu
Kai Kang
Yi Zhao
Oleksandr Kravchuk
Johan Jeppsson
Julius Hemanth Pitti
Changqing Li
Zheng Ruoqin
Christian Eggers
Mingde (Matthew) Zeng
Armin Kuster
Robert Yang
Hongxu Jia
Konrad Weihmann