Add recipe to build the C based gRPC libraries.
Regular gRPC build process uses git sub-modules for dependcies on external
libraries/tools (c-ares, protobuf, etc). This recipe add patches and configs
to use libraries provided by Yocto/bitbake/OE.
grpc-native is required to build grpc for target - it uses some grpc plugins
built for host.
Signed-off-by: Alexey Firago <alexey_firago@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Bug fix release:
- correctly handle signal interrupts when polling in gpiod_simple_event_loop()
- fix the linking order when building with static libraries
- pass the correct consumer string to gpiod_simple_get_value_multiple() in
gpioget
- fix a line test case: don't use open-drain or open-source flags for input
mode
- fix the flags passed to ar in order to supress a build warning
- set the last error code in gpiod_chip_open_by_label() to ENOENT if a chip
can't be found
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Linux Kernel Module for ISO 15765-2:2016 CAN transport protocol.
CAN Transport Protocol offers support for segmented Point-to-Point
communication between CAN nodes via two defined CAN Identifiers. This protocol
driver implements data transfers according to ISO 15765-2.
This recipe provides can-isotp.ko kernel module.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Several runtime dependencies are missing from python-pygps. You can
verify this by adding gps-utils to an image and running gpsfake, which
will fail with python import errors. With this patch, gpsfake works
correctly.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
HAVE_NODEJS is a leftover from meta-refkit-core where the
layer had to adapt to different BBLAYER combinations (some
where nodejs wasn't available but mraa/upm were).
mraa/upm nodejs bindings currently fail to build (due to a problem
in swig with nodejs > v7.x) so we keep them disabled until a newer
version of swig lands in OE-core.
The commit adds BINDINGS overrides for armv4/5 to remind that nodejs
isn't available on those architectures.
Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
While multilib enabled, if other recipe RDEPENDS python3-libreport,
it failed with:
...
ERROR: Nothing RPROVIDES 'lib32-python3-libreport'
...
Do not use python3-${PN} could fix the issue.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
While multilib enabled, if other recipe RDEPENDS python3-libpwquality,
it failed with:
...
ERROR: Nothing RPROVIDES 'lib32-python3-libpwquality'
...
Do not use python3-${PN} could fix the issue.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
LICENSE checksum updated due to copyright and formatting changes.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The berlios project has been dead for a long time. tslib is hosted and
developed on github for years already.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
oe-core will focus on perf as a better alternative moving forward. Existing
users of oprofile are encouraged to move to perf, but for now can be unblocked
with oprofile moved to meta-oe.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Version 5.8 does no longer includes the facebook patent grant and is
licensed under the Apache-2.0 or GPL-2.0 license.
Tests and tools don't compile on armv5 so we disable them.
The tools are never installed anyway so it doesn't make a difference for
the resulting package.
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
${bindir}/npx is a symbolic link to npm-cli.js in the npm module.
This avoids the nodejs package depending on nodejs-npm.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Note, hostapd and wpa_supplicant use the same sources. This commit is based
on Ross Burton's change to OpenEmbedded-core. Below is Ross's commit message
from OpenEmbedded-Core.
WPA2 is vulnerable to replay attacks which result in unauthenticated users
having access to the network.
* CVE-2017-13077: reinstallation of the pairwise key in the Four-way handshake
* CVE-2017-13078: reinstallation of the group key in the Four-way handshake
* CVE-2017-13079: reinstallation of the integrity group key in the Four-way
handshake
* CVE-2017-13080: reinstallation of the group key in the Group Key handshake
* CVE-2017-13081: reinstallation of the integrity group key in the Group Key
handshake
* CVE-2017-13082: accepting a retransmitted Fast BSS Transition Reassociation
Request and reinstalling the pairwise key while processing it
* CVE-2017-13086: reinstallation of the Tunneled Direct-Link Setup (TDLS)
PeerKey (TPK) key in the TDLS handshake
* CVE-2017-13087: reinstallation of the group key (GTK) when processing a
Wireless Network Management (WNM) Sleep Mode Response frame
* CVE-2017-13088: reinstallation of the integrity group key (IGTK) when
processing a Wireless Network Management (WNM) Sleep Mode Response frame
Backport patches from upstream to resolve these CVEs.
Signed-off-by: Ross Burton <ross.burton@intel.com>
The hunk:
[PATCH 7/8] WNM: Ignore WNM-Sleep Mode Response without pending request
does not apply to hostapd and was removed from the patch.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Attempting to include gpsd on Yocto pyro with IMAGE_FEATURES including
read-only-rootfs results in an error:
"The following packages could not be configured offline and rootfs is
read-only"
This stems from a failure during the do_rootfs steps where the /etc/init.d/gpsd
file is missing during the call to update-rc.d.
This happens because the /etc/init.d/gpsd file is installed during
package install for gpsd-conf instead of gpsd, and the default value for
INITSCRIPT_PACKAGES is PN. To resolve, specify INITSCRIPT_PACKAGES as
gpsd-conf instead.
Also, as suggested on the Yocto mailing list, refactor to inherit
update-alternatives and use this to replace the postinst and postrm
steps.
Signed-off-by: Dan Walkes <danwalkes@trellis-logic.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The "id" HOSTTOOLS should be add to the HOSTTOOLS definition on
OE-Core; especially "id" is used on
"rootfs_check_host_user_contaminated" rootfs-postcommand which is
available on OE-Core thus belonging to it.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Make this recipe a little more widely visible (has previously appeared
in meta-refkit-core and meta-intel-iot-middleware). Also make couple of
minor tweaks:
* Fix BINDINGS example to use the correct recipe name (copy-paste error)
* Set HOMEPAGE
* Drop AUTHOR as this is field is only really intended for older
software where there is no real point of contact for upstream other
than an author's email address.
* Set same COMPATIBLE_HOST as mraa since upm depends upon it
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Make this recipe a little more widely visible (has previously appeared
in meta-refkit-core and meta-intel-iot-middleware). Also make couple of
minor tweaks:
* Make SUMMARY more accurate by borrowing the first part of the short
description now in the mraa github repo
* Set HOMEPAGE
* Drop AUTHOR as this is field is only really intended for older
software where there is no real point of contact for upstream other
than an author's email address.
* Set COMPATIBLE_HOST to match what is checked by mraa's CMakeLists.txt
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
If not passed to SCon, it will try to guess it
and do it by poking at build host, which wont
work in cross environment
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Two patches are applied in upstream (v0.8)
Major release features
* event tracing support
* python scripting support
* nested libcall tracing
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
There are 2 GPL variations 'GPLv3' and 'GPLv3.0' for canonical (SPDX) form
of 'GPL-3.0' now. Refactoring code to use function
incompatible_license_contains() from license.bbclass to filter them all
to disable package config 'thin-provisioning-tools'.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
While systemd based, start lvm2-monitor.service failed.
...
|Sep 21 05:37:34 qemux86-64 lvm[389]: /var/lock: stat failed: No such
file or directory
|Sep 21 05:37:34 qemux86-64 systemd[1]: lvm2-monitor.service: Main
process exited, code=exited, status=5/NOTINSTALLED
...
The failure of lvm2-monitor.service caused reboot hung when disk
partion is lvm thin provision.
While starting lvm2-monitor.service, it reqires the existence of
locking dir "/var/lock" which is a symlink to "../run/lock" in oe-core,
and "/run" is created in "/etc/fstab" which have to be be after the
start of lvm2-monitor.service.
So tweak the locking dir to "/tmp/lock" and make sure the dir existence
(after tmp.mount).
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Disable thin provisioning support for lvm2 if it is set GPLv3
incompatible.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Alexey Firago
Bartosz Golaszewski
Andrea Galbusera
Martin Kelly
Mikko Ylinen
fan.xin
Hongxu Jia
Huang Qiyu
Aníbal Limón
Jonathan Liu
Martin Kepplinger
Khem Raj
Kai Kang
Denys Dmytriyenko
Pascal Bach
Mark Hatle
Dan Walkes
Otavio Salvador
baali
Andre McCurdy
Martin Jansa
Paul Eggleton
Tim Orling
Changhyeok Bae
Fathi Boudra