lmbench can't proceed on some targets. The memory check fails because the
memory latency of each page is longer then 10us, which is a time limit set
in the original memsize.c.
The memory latency is very different on different targets due to the
hardware and current system load. The targets with slower memory
chips or heavy system load need much longer time to read or write
the memory.
This fix changes the fixed time limit of 10us to a specific value calculated
from the runtime target.
Also set an upper limit of memory size used for lmbench testing. The memory
check sometimes fails if the target has a large amount of memory, for
example more than 4G.
Signed-off-by: Qingming Su <qingming.su@windriver.com>
Signed-off-by: Fupan Li <fupan.li@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. one test case is not installed
2. install a copy of numactl into ptest dir, since the test
script is using the relative path to run numactl
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. Uprev it to 5.1.0, add remove the unneed patches
2. fix a building failure since not include stdarg.h
3. using pkg-config to check xml and krb5
4. force STRIP to empty to not strip the file
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* removed two patches which were already integrated in 5.2.0:
strongswan-4.3.3-5.1.1_asn1_unwrap.patch
strongswan-5.0.0-5.1.2_reject_child_sa.patch
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
- change to use tar.gz since bz2 is no longer provided in upstream
- adjust the patch for new version
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Changes since 0.18.7:
* screenshot now displays a helpful error message when it fails
* efm no longer sometimes shows files from other directories
* efm no longer sometimes shows blank filenames
* fix syscon button signals
* fix winlist scrolling
* fix systray appindicator deletion
* fix systray appindicator icon loading
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Pinba support requires protobuf-c that is currently only available in
meta-virtualization layer. Make this a selectable feature.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. uprev to 2.0.20
2. Update the license md5sum, since the address is changed in COPYING*:
From:
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
To:
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
1. uprev to 4.6.1
2. remove three obsolete patches
3. use PACKAGECONFIG, and the default value is ipv6 openssl
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The configure script for mg checks the standard locations under /usr for
the term.h header file needed to build against ncurses; however, in the
OE cross-compile case, this is not valid, since the file will be under
the sysroot instead. This causes the configure step to fail when the
build machine does not have the libncurses-dev package installed.
To fix the issue, remove the check. Since mg DEPENDS on ncurses, term.h
will always be there.
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
cgdb is a lightweight ncurses-based interface to gdb that provides
syntax highlighting, visual breakpoints, and other features.
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add recipe for libmime-types-perl. Enable to create ptest sub-package at
same time.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add recipe for libio-socket-ssl-perl. Inherit ptest to enable build
-ptest sub-package and add file 'run-ptest'.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add recipe for libnet-ssleay-perl. Inherit ptest to enable build
-ptest sub-package and add file 'run-ptest'.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add recipe for libauthen-sasl-perl. Inherit ptest to enable build -ptest
sub-package and add file 'run-ptest'.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add recipe for libdigest-hmac-perl and enable to create -ptest sub-package.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The monlist feature in ntp_request.c in ntpd in NTP before
4.2.7p26 allows remote attackers to cause a denial of service
(traffic amplification) via forged (1) REQ_MON_GETLIST or
(2) REQ_MON_GETLIST_1 requests, as exploited in the wild
in December 2013.
Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
There is a problem in configure.ac file that whether or not
'--enable-debugging' is specified in configure cmdline, debugging
is always enabled.
We should disable ntp debugging by default.
Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The version of rabbitmq-c that collectd is compatible with, is older
than currently available 0.5.0. This results in build errors
triggerred by API deprecation at rabbitmq-c side. Make amqp
plugin a selectable feature, disabled by default.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Upstream Status: Submitted
This patch applies the same technique used by Koen Kool in the following patch
which was accepted by the libhugetlbfs project:
[0a4f6] Add aarch64_be_support 2014-03-31 10:52:37
It modifies the libhugetlbfs Makefile to mark all 32-bit arm architectures
as supported by the libhugetlbfs build. Builds and successful functional
tests have been performed for armv7a LE and BE runtime platforms.
This patch replaces and renders obsolete the following patch:
arm32-support.patch by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Gary S. Robertson <gary.robertson@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
eject-2.1.1-verbose.patch: Kept to help with debugging
eject-2.1.5-spaces.patch: help with spaces in the mount path
eject-timeout.patch: allow a longer timeout
Signed-off-by: Morgan Little <morgan.little@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* fixes following QA warnings:
talloc-2.0.1: talloc: Files/directories were installed but not shipped
/usr/bin [installed-vs-shipped]
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Below error appears as login was auto-detected by default:
| telnetd: /usr/bin/login -p -h 192.168.2.1 : No such file or directory.
| Connection closed by foreign host.
Signed-off-by: Ting Liu <ting.liu@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The deprecated test code was no longer used, so remove it
to avoid compiling failure with -Werror=unused-function
...
| example21.cpp:51:8: error: 'size_t {anonymous}::readData(char*,
size_t, size_t)' defined but not used [-Werror=unused-function]
| size_t readData(char *buffer, size_t size, size_t nitems)
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The thread local storage caused arm-gcc broken while compiling
syslog-ng with option '-g -O'.
...
dnscache.s: Assembler messages:
dnscache.s💯 Error: invalid operands (.text and *UND* sections) for `-'
...
Add option --enable-thread-tls in configure to explicitly disable
thread local storage for arm while DEBUG_BUILD enabled.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* lib/mkmf.rb (create_makefile): fix race conditions at install-ext.
target files need to depend on destination directory timestamp
files, not phony trgets.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Patches really belong in the recipe, not the .inc, given patches are generally
version-bound.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>