Tuna is a cui/gui tool for tuning of running processes.
It is useful to see and changed irq affinity on an embedded board.
The chosen revision of tuna is the last commit to this day and not the
last release. This is due to the python3-ethtool module which was
required in the last release but isn't anymore. Tuna now has a built-in
module instead.
Despite tuna's homepage's dependencies section, python3-inet_diag isn't
required anymore.
Signed-off-by: Erwann Roussy <erwann.roussy@savoirfairelinux.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
with enable-tcl=yes, task do_configure looks for tclConfig.sh on
buildhost, and source it. But there is no dpkg-architecture in current
PATH, and the tclConfig.sh enter into an dead loop since
dpkg-architecture not found and finanlly Segmentation faulted. Therefore
it is better to disable tcl
do_configure failure:
using /usr/lib/tclConfig.sh
/usr/lib/tclConfig.sh: line 2: dpkg-architecture: command not found
/usr/lib//tcl8.6/tclConfig.sh: line 2: dpkg-architecture: command not found
...
/usr/lib//tcl8.6/tclConfig.sh: line 2: dpkg-architecture: command not found
/usr/lib//tcl8.6/tclConfig.sh: line 2: dpkg-architecture: command not found
NOTE: The following config.log files may provide further information.
Segmentation fault (core dumped)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It does not build due to CGO building in shared mode and needing PIC
but somewhere it needs to be fixed to build. Until then disable it
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Install uefi-firmware-parser tool
The UEFI firmware parseer is a simple module and set of scripts for
parsing, extracting, and recreating UEFI firmware volumes.
Signed-off-by: Tomasz Żyjewski <tomasz.zyjewski@3mdeb.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The recently added kmod and watchdogdev packages were not added to the
meta-python packagegroup. This fixes it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Backport patch to replace deprecated inspect.getargspec in lib pubsub.
And add python3-pip to RDEPENDS which is required by utils wxdemo,
wxdocs and wxget provided by python3-wxgtk4.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It fails to install postfix and lib32-postfix at same time:
| Error: Transaction test error:
| file /etc/postfix/sample-main.cf conflicts between attempted installs of
lib32-postfix-cfg-3.7.3-r0.i586 and postfix-cfg-3.7.3-r0.core2_64
Rename sample-main.cf with ${MLPREFIX}.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
- Add smcroutectl batch support, issue #189. Based on the IPC support added in issue #185
- Fix#178: invalid systemd daemon type Simple/Notify vs simple/notify
- Fix#179: typo in wildcard routes section of README
- Fix#180: minor typo in file and directory names in documentation
- Fix#183: casting in IPC code hides error handling of recv()
- Fix#186: NULL pointer dereference in utimensat() replacement function.
Found accidentally by Alexey Smirnov. Only triggered on systems that don't
have a native utimensat() in their C-library, or if you try to build
SMCRoute without using its own build system ...
- Fix#187: strange behavior joining/leaving the same group
- Fix#192: typo in README
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
===========
Features
---------
Add api_key credentials
Introduce a way to provide scopes granted by user
Bug Fixes
---------
Allow mtls sts endpoint for external account token urls.
CI broken by removal of py.path
Ensure JWT segments have the right types
Updated the lower bound of interactive timeout and fix the kwarg
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
=========
Features
---------
Add support for Python 3.11 (#466) (ff379e3)
Allow representing enums with their unqualified symbolic names in headers (#465) (522b98e)
Bug Fixes
--------
Major refactoring of Polling, Retry and Timeout logic (#462) (434253d)
Require google-auth >= 2.14.1 (#463) (7cc329f)
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
Fix bug in _round_and_pad with exponential coordinate values (#73)
Use assertNotEqual instead of assertNotEquals in tests, for Python 3.11 compatibility (#77)
Add support for Python 3.8, 3.9, and 3.10 (#79, #84)
Drop support for end-of-life Python versions 2.7, 3.4, 3.5, and 3.6 (#84)
Fix structure of coordinate values in GeoJSON to EsriJSON conversion (#82)
Update README with to add History and Limitations sections, and to expand on functionality (#86)
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
Added official Python 3.11 support
Raise proper exception on invalid bignums
Make Tagged item usable as a map key
Eliminate potential memory leak in tag handling
Documentation tweaks
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
* Form::addFontToDefaultResources: Be stubborn in finding a font we can use. Issue #1272
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
============
Support signing of data with a length of more than 512 bytes (#2314)
By default, disable support for old card drivers (#2391) and remove support for old drivers MioCOS and JCOP (#2374)
Bump minimal required OpenSSL version to 1.1.1 and add support for OpenSSL 3.0 (#2438, #2506)
Compatibility with LibreSSL (#2495, #2595)
Remove support for DSA (#2503)
Extend p11test to support symmetric keys (#2430)
Notice detached reader on macOS (#2418)
Support for OAEP padding (#2475, #2484)
Fix for PSS salt length (#2478)
Improve fuzzing by adding new tests (#2417, #2500, #2520, #2550, #2637)
Fixed various issues reported by OSS-Fuzz and Coverity regarding card drivers, PKCS#11 and PKCS#15 init
Fix issues with OpenPACE (#2472)
Containers support for local testing
Add support for encryption and decryption using symmetric keys (#2473, #2607)
Stop building support for Gost algorithms with OpenSSL 3.0 as they require deprecated API (#2586)
Fix detection of disconnected readers in PCSC (#2600)
Add configuration option for on-disk caching of private data (#2588)
Skip building empty binaries when dependencies are missing and remove needless linking (#2617)
Define arm64 as a supported architecture in the Installer package (#2610)
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
- fix memory leak in session cache, thanks to genuaboro
- more race conditions in tests fixed thanks to jddurand
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Detailed Changes:
==================
- Fix various parts relating to automatic linebreaking
- Fix rendering when hinting was enabled and fontsizes or scales are zero
- Switch build to a non-recursive setup for improved parallelism
- Improve quality of SSA Effects movement
- Further documentation improvements
- Completely invalid Events are now discarded during parsing
- Introduction of LayoutRes{X,Y} script headers
- New AlphaLevel style override to set all alpha values while keeping the color
- Add ASS_FEATURE_WRAP_UNICODE to allow automatic linebreaks in accordance with
the Unicode line breaking algorithm instead of ASS' much stricter breaking
rules. For the feature to be available at runtime, libass must be linked
against the new optional dependency libunibreak.
- Improve VSFilter compatibility:
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
We already tried to pass -mfloat-abi=hard if the machine can use it, but since
no floating-point-unit was defined it got stubbed out and the result was, that
only arm targets configured for softfp were able to build perfetto.
Simplify by passing ${TUNE_CCARGS} to ensure, we always use the features, the
machine was configured for.
Also, do not use sed to remove the hardcoded -mfpu=neon entry. If this really
turns out to be problematic, we need to patch it out to avoid not having a
floating-point-unit again.
Signed-off-by: Markus Volk <f_l_k@t-online.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
All the ptest cases are failed since error "+++ Can't Determine Endianness",
update the regex for matching the endianness to fix this issue.
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add a recipe for watchdogdev - a python module for controlling linux
watchdog devices.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
syntax for LICENSE_FLAGS_ACCEPTED can be "type_package" format as well
and some distros may enable commercial license selectively by not using
"commercial" as broadbrush but "commercial_ffmpeg" to just enable libav
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Fixes
File "TOPDIR/build/tmp/work/cortexa15t2hf-neon-yoe-linux-gnueabi/tepl/6.2.0-r0/recipe-sysroot-native/usr/share/gtk-doc/python/gtkdoc/highlight.py", line 27, in <module>
from pygments import highlight
ModuleNotFoundError: No module named 'pygments'
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It currently ends up using native python3-config which adds native paths
to compiler includes which is not what we want.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Fixes
File "TOPDIR/build/tmp/work/mips32r2-yoe-linux/amtk/5.6.1-r0/recipe-sysroot-native/usr/share/gtk-doc/python/gtkdoc/highlight.py", line 27, in <module>
from pygments import highlight
ModuleNotFoundError: No module named 'pygments'
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Use multiline styling in the gvfs DEPENDS variable assignment, so that
diffs are easier to understand.
Also alpha-sort the DEPENDS, since their order isn't meaningful.
Signed-off-by: Alex Stewart <alex.stewart@ni.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It fails on highcore machines
e.g.
| make[1]: *** [Makefile:697: rebuild] Error 1
| make[1]: *** Waiting for unfinished jobs....
| make[2]: *** No rule to make target '../c-client/osdep.h', needed by 'ipop2d.o'. Stop.
| make[2]: *** Waiting for unfinished jobs....
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Markus Volk
Erwann Roussy
Changqing Li
Khem Raj
Tomasz Żyjewski
Bartosz Golaszewski
Kai Kang
Wang Mingyu
Fabio Estevam
Alex Stewart