Changelog:
==========
Updated printers:
-----------------
BGP: Update cease notification decoding to RFC 9003.
BGP: decode BGP link-bandwidth extended community properly.
BGP: Fix parsing the AIGP attribute
BGP: make sure the path attributes don't go past the end of the packet.
BGP: Shutdown message can be up to 255 bytes length according to rfc9003
DSA: correctly determine VID.
EAP: fix some length checks and output issues.
802.11: Fix the misleading comment regarding "From DS", "To DS" Frame Control Flags.
802.11: Fetch the CF and TIM IEs a field at a time.
802.15.4, BGP, LISP: fix some length checks, compiler warnings,
and undefined behavior warnings.
PFLOG: handle LINKTYPE_PFLOG/DLT_PFLOG files from all OSes on all OSes.
RRCP: support more Realtek protocols than just RRCP.
MPLS: show the EXP field as TC, as per RFC 5462.
ICMP: redo MPLS Extension code as general ICMP Extension code.
VQP: Do not print unknown error codes twice.
Juniper: Add some bounds checks.
Juniper: Don't treat known DLT_ types as "Unknown".
lwres: Fix a length check, update a variable type.
EAP: Fix some undefined behaviors at runtime.
Ethernet: Rework the length checks, add a length check.
IPX: Add two length checks.
Zephyr: Avoid printing non-ASCII characters.
VRRP: Print the protocol name before any GET_().
DCCP: Get rid of trailing commas in lists.
Juniper: Report invalid packets as invalid, not truncated.
IPv6: Remove an obsolete code in an always-false #if wrapper.
ISAKMP: Use GET_U_1() to replace a direct dereference.
RADIUS: Use GET_U_1() to replace a direct dereference.
TCP: Fix an invalid check.
RESP: Fix an invalid check.
RESP: Remove an unnecessary test.
Arista: Refine the output format and print HwInfo.
sFlow: add support for IPv6 agent, add a length check.
VRRP: add support for IPv6.
OSPF: Update to match the Router Properties registry.
OSPF: Remove two unnecessary dereferences.
OSPF: Add support bit Nt RFC3101.
OSPFv3: Remove two unnecessary dereferences.
ICMPv6: Fix output for Router Renumbering messages.
ICMPv6: Fix the Node Information flags.
ICMPv6: Remove an unused macro and extra blank lines.
ICMPv6: Add a length check in the rpl_dio_print() function.
ICMPv6: Use GET_IP6ADDR_STRING() in the rpl_dio_print() function.
IPv6: Add some checks for the Hop-by-Hop Options header
IPv6: Add a check for the Jumbo Payload Hop-by-Hop option.
NFS: Fix the format for printing an unsigned int
PTP: fix printing of the correction fields
PTP: Use ND_LCHECK_U for checking invalid length.
WHOIS: Add its own printer source file and printer function
MPTCP: print length before subtype inside MPTCP options
ESP: Add a workaround to a "use-of-uninitialized-value".
PPP: Add tests to avoid incorrectly re-entering ppp_hdlc().
PPP: Don't process further if protocol is unknown (-e option).
PPP: Change the pointer to packet data.
ZEP: Add three length checks.
Add some const qualifiers.
Building and testing:
----------------------
Update config.guess and config.sub.
Use AS_HELP_STRING macro instead of AC_HELP_STRING.
Handle some Autoconf/make errors better.
Fix an error when cross-compiling.
Use "git archive" for the "make releasetar" process.
Remove the release candidate rcX targets.
Mend "make check" on Solaris 9 with Autoconf.
Address assorted compiler warnings.
Fix auto-enabling of Capsicum on FreeBSD with Autoconf.
Treat "msys" as Windows for test exit statuses.
Clean up some help messages in configure.
Use unified diff by default.
Remove awk code from mkdep.
Fix configure test errors with Clang 15
CMake: Prevent stripping of the RPATH on installation.
AppVeyor CI: update Npcap site, update to 1.12 SDK.
Cirrus CI: Use the same configuration as for the main branch.
CI: Add back running tcpdump -J/-L and capture, now with Cirrus VMs.
Remove four test files (They are now in the libpcap tests directory).
On Solaris, for 64-bit builds, use the 64-bit pcap-config.
Tell CMake not to check for a C++ compiler.
CMake: Add a way to request -Werror and equivalents.
configure: Special-case macOS /usr/bin/pcap-config as we do in CMake.
configure: Use pcap-config --static-pcap-only if available.
configure: Use ac_c_werror_flag to force unknown compiler flags to fail.
configure: Use AC_COMPILE_IFELSE() and AC_LANG_SOURCE() for testing flags.
Run the test that fails on OpenBSD only if we're not on OpenBSD.
Source code:
-------------
Fix some snapend-changing routines to protect against pointer underflow.
Use __func__ from C99 in some function calls.
Memory allocator: Update nd_add_alloc_list() to a static function.
addrtoname.c: Fix two invalid tests.
Use more S_SUCCESS and S_ERR_HOST_PROGRAM in main().
Add some comments about "don't use GET_IP6ADDR_STRING()".
Assign ndo->ndo_packetp in pretty_print_packet().
Add ND_LCHECKMSG_U, ND_LCHECK_U, ND_LCHECKMSG_ZU and ND_LCHECK_ZU macros.
Update tok2strbuf() to a static function.
netdissect.h: Keep the link-layer dissectors names sorted.
setsignal(): Set SA_RESTART on non-lethal signals (REQ_INFO, FLUSH_PCAP)
to avoid corrupting binary pcap output.
Use __builtin_unreachable().
Fail if nd_push_buffer() or nd_push_snaplen() fails.
Improve code style and fix many typos.
Documentation:
---------------
Some man page cleanups.
Update the print interface for the packet count to stdout.
Note that we require compilers to support at least some of C99.
Update AIX and Solaris-related specifics.
INSTALL.txt: Add doc/README.*, delete the deleted win32 directory.
Update README.md and README.Win32.md.
Update some comments with new RFC numbers.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The size on glibc depends on time_t size which is 64bit on newer
architectures like rv32 while on musl it is indicated by _FILE_OFFSET_BITS
therefore check for both
Signed-off-by: Khem Raj <raj.khem@gmail.com>
With export PYTHONHASHSEED="1" there will be no need for patching samba and its related libs
So easier maintenance and a cleaner OE
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The current handling of /etc/resolv.conf by NM has some problems.
When networkd is not configuring network, and there's 'ip=dhcp'
in kernel command line, the /run/NetworkManager/resolv.conf file
is not created, resulting in /etc/resolv.conf being a dead symlink.
This is because NM is treating the network interface as externally
configured and will not try to reconfigure it again.
This means if we want NM to work properly with /etc/resolv.conf,
we've got to either ensure there's no 'ip=dhcp' in kernel command
line, or we've got to ensure networkd is configuring network. This
is weird because normally we should not enable two network managers
at the same time. Note that NM syncs part of its codes with networkd,
which is the reason I think it happens to work when these two network
configuration tools are configuring the same interface at the same
time.
In fact, NM now works well with resolved. It sends the DNS info it
gets to resolved unconditionally by default (the behavior could be
disabled in configuration file).
Looking at the original commit that sets up the update-alternatives
mechanism, it says:
"""
This brings the networkmanager in sync with how systemd-resolved and connman
work. Additionally this allows it to function with a read-only rootFS.
"""
I guess the author was using systemd but disabling resolved, and the author
wanted to use read-only rootFS. In order to keep such combination still works,
change to use PACKAGECONFIG to handle things, and when 'man-resolv-conf' is
enabled, the above combination could still work.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
MDNS_VERSIONSTR_NODTS disables __DATE__ and __TIME__ in the version string,
which are fixed anyway for build reproducibility.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
===========
Fix bug in --dynamic-host when an interface has /16 IPv4
address.
Add --fast-dns-retry option.
Add --use-stale-cache option.
Make --hostsdir (but NOT --dhcp-hostsdir and --dhcp-optsdir)
handle removal of whole files or entries within files.
Add --no-round-robin option.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The current location has no effect, because NetworkManager
is not looking for config files there.
In meson.build, we have:
nm_pkglibdir = join_paths(nm_prefix, 'lib', nm_name)
config_extra_h.set_quoted('NMLIBDIR', nm_pkglibdir)
It's clear that the configuration directory should be
nonarch_libdir instead of libdir.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Without this patch, even if dhcpcd is enabled, the NetworkManager
cannot find it. Below are the messages from NetworkMananger:
dhcp: init: DHCP client 'dhcpcd' not available
dhcp: init: Using DHCP client 'internal'
The problem is that dhcpcd needs to be specified as a path, otherwise
NetworkManager tries to find it in /usr/sbin/dhcpcd.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reinstate and rework patches from @garmin.com dropped in 21afab4609
("mdns: update to version 1096.40.7") as these were the functional
pieces of this series; we should either maintain it as a whole or drop
it in its entirety. With this update and without this series,
steady-state operation is a constant churn of all names being removed
and re-added every few seconds. These were refactored to handle the move
to getifaddrs() from get_ifi_info().
Check and cleanup all the other patches, much of which was redundant.
Move source releases to github which is where the Apple site now
redirects to (though these are still effectively just tarball dumps into
git).
Cleanup the recipe so it doesn't override all the packaging defaults.
Fixup musl installs so they don't fail attempting to patch a
non-existent /etc/nsswitch.conf.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It fails to install postfix and lib32-postfix at same time:
| Error: Transaction test error:
| file /etc/postfix/sample-main.cf conflicts between attempted installs of
lib32-postfix-cfg-3.7.3-r0.i586 and postfix-cfg-3.7.3-r0.core2_64
Rename sample-main.cf with ${MLPREFIX}.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
- Add smcroutectl batch support, issue #189. Based on the IPC support added in issue #185
- Fix#178: invalid systemd daemon type Simple/Notify vs simple/notify
- Fix#179: typo in wildcard routes section of README
- Fix#180: minor typo in file and directory names in documentation
- Fix#183: casting in IPC code hides error handling of recv()
- Fix#186: NULL pointer dereference in utimensat() replacement function.
Found accidentally by Alexey Smirnov. Only triggered on systems that don't
have a native utimensat() in their C-library, or if you try to build
SMCRoute without using its own build system ...
- Fix#187: strange behavior joining/leaving the same group
- Fix#192: typo in README
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The checksum was not updated when the recipe version was stepped.
Also simplify the SRC_URI by replacing "${BPN}-${PV}" with "${BP}".
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This reverts commit e154914718.
The change of SRC_URI was probably triggered by the checksum for the
tarball not having been updated when the recipe version was stepped.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This fixes a nasty bug where the shown device list doesnt match the underlying
MAC list, resulting in connecting to a different device than selected.
Signed-off-by: Markus Volk <f_l_k@t-online.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Fix:
--------
Do not use 00:00:00:00:00:00 as chassis ID.
Do not busy loop when an interface with a neighbor disappears.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
=========
* IP condfiguration is no longer required in TAP mode.
* Fix initialization of secret flags.
* Add support for DOMAIN-SEARCH option.
* Set data-ciphers option with chosen cipher.
* Update Brazilian Portuguese, Croatian, Danish, Georgian, Polish, Serbian,
Slovenian, Swedish, Turkish and Ukrainian translations.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It fails to start radiusd.service from lib32-freeradius that the
configure directory is /etc/lib32-raddb rather than /etc/raddb. So add
an environment file to export a variable MLPREFIX for the service file
to make it start successfully.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It depends on it, but it was being pulled in via glib-2.0
which now uses libpcre2
Fixes
TOPDIR/build/tmp/work/cortexa15t2hf-neon-yoe-linux-gnueabi/ettercap/0.8.3.1-r0/recipe-sysroot-native/usr/lib/libpcre.so: file not recognized: file format not recognized
Signed-off-by: Khem Raj <raj.khem@gmail.com>
There is no need for these configs on their own and they would only mess
up the sechash and privdrop configs. To actually enable sechash one also
had to enable nss, and to enable privdrop one also had to enable libcap.
This also avoids passing --with-libcap if privdrop is enabled since the
option does not exist.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Support for readline was dropped in Chrony 4.2. However, the
--disable-readline option still remains (it is used to completely ignore
all forms of command line editing, even though the only remaining
variant is editline). So keeping the readline PACKAGECONFIG and making
it pass --disable-readline when it is not enabled disabled support for
editline, and if it was enabled it instead passed --without-editline,
which also disabled support for editline. Thus there was no way to
enable editline support.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
After updating current poky master python3-fcntl is not installed
into my image anymore. Blueman-applet fails to run with
Error: No module named 'fcntl''Module fcntl not found'
Signed-off-by: Markus Volk <f_l_k@t-online.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Fixes
---------
Fix for possible buffer zeroization overrun introduced at the end of
v5.5.2 release cycle in GitHub pull request 5743 (#5743) and fixed in
pull request 5757 (#5757). In the case where a specific memory allocation
failed or a hardware fault happened there was the potential for an overrun
of 0's when masking the buffer used for (D)TLS 1.2 and lower operations.
(D)TLS 1.3 only and crypto only users are not affected by the issue.
This is not related in any way to recent issues reported in OpenSSL.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
Security bugfixes
-----------------
OpenSSL DLLs updated to version 3.0.7.
New features
------------
Provided a logging callback to custom engines.
Bugfixes
---------
OpenSSL DLLs updated to version 3.0.6.
Fixed "make cert" with OpenSSL older than 3.0.
Fixed the code and the documentation to use concious language for SNI servers (thx to Clemens Lang).
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
tls-crypt-v2: bail out if the client key is too small
Remove useless empty line from CR_RESPONSE message
Allow running a default configuration with TLS libraries without BF-CBC
Change command help to match man page and implementation
Fix OpenVPN querying user/password if auth-token with user expires
t_client: Allow to force FAIL on prerequisite fails
t_client.sh: do not require fping6
Preparing release 2.5.8
msvc: add branch name and commit hash to version output
Update the replay-window backtrack log message
Do not skip ERROR:/SUCCESS: response from management interface
Fix auth-token usage with management-def-auth
Allow a few levels of recursion in virtual_output_callback()
Ensure --auth-nocache is handled during renegotiation
Purge auth-token as well while purging passwords
Do not copy auth_token username to itself
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Khem Raj
Wang Mingyu
Martin Jansa
persianpros
Yi Zhao
Chen Qi
Alex Kiernan
Mingli Yu
Markus Volk
Kai Kang
Peter Kjellerstedt
Xiangyu Chen
Alexander Kanavin