This is a bugfix release that is API and ABI compatible with previous
0.3.x releases.
- A new zero-latency jackdbus bridge was added. This works similar to what
PulseAudio has to offer and creates a sink/source when jackdbus is
started. It is however much more efficient and runs the complete PipeWire
graph as a synchronous JACK client with no added latency.
- Many performance improvements. Activation of remote nodes is more
efficient, fewer eventfds are required on the clients, less callback
overhead in performence critical paths and an optimized poll function
was added. This was mainly driven by the jackdbus module to get the lowest
possible overhead when running the graph.
- The JACK notify callback implementation was reworked to emulate better what
JACK does, improving compatibility with ardour7 and the JACK stress test.
- More work on BAP devices. Device latency is now passed on to
applications also for multi-device headsets, and channel allocation
is handled better.
- Many more improvements and bugfixes.
- Remove the hardcoded limit on io_areas. This is used to link nodes together
and exchange buffers, it was limited to 2048 but now dynamically scales
based on requirements.
- Rate and quantum changes are now applied correctly in more cases. (#3159)
- Updates to client-node to more efficiently process the driver.
- The profiler information was improved to be more accurate. It should
now work better for remote drivers.
- Some potential memory map errors were fixed in the protocol because in some
case with large messages, some fds were closed too soon.
- pw-filter now implements the pw_filter_set_active() method.
- A potential out-of-buffers case was fixed in capture pw-streams where buffers
were not moved to the recycle queue when the node suspended.
- Nodes are now always woken up with the eventfd. Previously there were
some optimiztions in the server to directly call into the node process
function but that optimization is not necessary. Without this optimization
it is now possible to run nodes in different threads.
- pw-stream trigger is now implemented correctly in all cases.
- Remote nodes now use one eventfd less because they get triggered with the
node eventfd directly.
- Monitor ports are now ignored in latency updates.
- A potential race when reporting an error to a client was fixed. (#3192)
- Fix a bug where always_process nodes would sometimes IDLE. (#3189)
- Optimize peer activation. Nodes are now activated more efficiently and
independent of the number of links. It also reduces the number of eventfds
and memory in remote clients.
- A bug in property serialization was fixed. Values with spaces would only
serialize the first part of the value.
- Correctly handle the echo-canceler plugin init method fallback. The
samplerate was not correctly configured. This is only a regression for people
that have external echo-canceler plugins.
- RAOP sink now only sets the volume on the remote end when the stream is
recording. (#3175)
- RAOP discover now tries to deduplicate entries from the same host.
- A new zero-latency jackdbus bridge was added. This works similar to what
pulseaudio has to offer and creates a sink/source when jackdbus is
started. It is however much more efficient and runs the complete PipeWire
graph as a synchronous JACK client.
- The access module uses a more secure way to check the application
executable.
- module-combine-stream now has configurable delay and latency for each
stream. This can be used to align sinks/sources with different latencies.
- A potential crash in module-pulse-tunnel was fixed when shutting down.
(#3199)
- Module-rt will now clamp the nice value to the min allowed value to avoid
errors from rtkit. (#3186)
- Fix a bug with the session counters in module-rtp-sap. Also use the right
format for L24. Improve the AES67 example config.
- Improve some warning and info messages in module-rt. (#3194)
- module-rtp-session should now do something when started without arguments.
- A potential crash in module-rtp-session was fixed. (#3217)
- module-filter-chain has better error reporting when a convolver fails to
load. (#3223)
- Move some things around to avoid compiler warnings. (#3171)
- Increase mixer ports. Reorganize some things and bump mixer input ports
from 128 to 512.
- Fix a potential crash when a node is scheduled before it completes
the setup.
- The JACK sink and source SPA plugins have seen some improvements.
- Allow the peaks resampler still if we disabled resampling.
- Perform more cleanup in audioadapter when in error.
- An optimized non-cancellable loop implementation was added.
- Callbacks were optimized with a _fast() varsion that doesn't check the
version and method. When this check is performed earlier, it can
be skipped in performance critical places.
- Some of the callbacks and system methods are now using the fast function
calls in critical paths.
- A potential division by zero was fixed in the ALSA plugins.
- Improve rate and quantum when starting audioconvert.
- Make it possible to override node.driver in the SPA null-audio-driver.
(#3220)
- The audio info parameter parsing was refactored and improved.
- Fix some races with clients exiting when playing samples.
- An option was added to change or disable the dbus name registration.
(#2987)
- Implement battery reporting using AT+XEVENT.
- Disable hardware volume for 3M WorkTunes.
- Implement BAP audio locations (channel positions) by using the new
bluez properties.
- Fix some errors reported by JACK test.cpp. (#2638)
- Add jack.show-midi option to show/hide midi ports.
- Add jack.max-client-ports option. JACK also has a port limit and so
PipeWire needs it as well to make the tests happy.
- Call the shutdown callback only when the server stopped, not when there
is a random error. (#3070)
- Avoid registering the same port name twice.
- Call port registration callbacks in activate/deactivate.
- Improve jack_port_connected().
- Improve some error reporting.
- The JACK headers were updated to a newer version.
- JACK callbacks are now managed with an event queue to simulate
more what JACK does. This avoids emiting callbacks when a method is blocking
for a reply and causing deadlocks. (#3183)
- Assign unique names to JACK clients. (#2833)
- Fix a potential crash when the thread_utils was used after free.
- Aliases are now not filled in by default to improve JACK compatibility.
(#3154)
- The ALSA plugin will now wait for negotiation to complete or an error
before _prepare() completes. This makes more applications deal correctly
with the potential errors.
- A new document about how scheduling is implemented was added.
- Update the pw-cli man page. (#2988)
- Document the SPA Pod serialization.
- Document the PipeWire native protocol.
Signed-off-by: Markus Volk <f_l_k@t-online.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
error message:
include/spdlog/common.h:168:111: error: 'basic_runtime' is not a member of 'fmt'
Add fix-build-for-master-fmt.patch:
* update fmt_runtime_string macro
* fix build of updated macro
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
By default only uvcvideo, simple and vimc pipelines as well as vimc IPA
are built. Add new variables for enabling a custom set of enabled
pipelines and IPAs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Sometimes an end user might want to change some values in
/sys/kernel/config/usb_gadget/ at runtime, for instance, a product id
or serial number must be read from /proc/device-tree, and so on.
Support that by letting gadget-start run all scripts in /etc/usbgx.d
after importing the schemas.
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changes in 44.1
=================
- Improve handling of non-existing files on the filechooser portal
- Minor debugging improvements to the backgrounds portal
- More precise initialization timing
- Fix duplicate monitor and window streams
- Translation updates
Signed-off-by: Markus Volk <f_l_k@t-online.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add the execute attribute for sysvinit service file to fix the
below error:
$ service minicoredumper status
minicoredumper: unrecognized service
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This avoid buildpaths being in target packages. These are emitted into
generated lexer.c and parser.c, therefore ensure that lex and yacc are
directled to not include lines in their output.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* I don't know anything about etcd including why we need these binaries duplicated
in libdir and bindir, but use ${libdir} instead of hardcoded /usr/lib to fix
do_install with multilib enabled when libdir is /usr/lib64 and it was failing
with:
DEBUG: Executing shell function do_install
ls: cannot access 'etcd/3.5.7-r0/build/bin/linux_arm64/': No such file or directory
install: cannot stat 'etcd/3.5.7-r0/image/usr/lib/go/src/go.etcd.io/etcd/v3/bin/etcd': No such file or directory
WARNING: exit code 1 from a shell command.
* the error from ls is unrelated, fixed in:
https://lists.openembedded.org/g/openembedded-core/message/181269
* also reported on github:
https://github.com/openembedded/meta-openembedded/pull/616
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
There is one test in the pylint suite involving pickling non-pickleable
plugins that fails on target (but not host). Disable this test for
ptest runs.
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This upgrade fixes most of the ptest errors that have been seen with
pylint, which were caused by a tomlkit issue. Changelog (see also
https://github.com/pylint-dev/pylint/releases/tag/v2.17.4):
False Positives Fixed
- Fix a false positive for bad-dunder-name when there is a
user-defined __index__ method. Closes#8613
Other Bug Fixes
- pyreverse: added escaping of vertical bar character in annotation
labels produced by DOT printer to ensure it is not treated as field
separator of record-based nodes. Closes#8603
- Fixed a crash when generating a configuration file:
tomlkit.exceptions.TOMLKitError: Can't add a table to a dotted key
caused by tomlkit v0.11.8. Closes#8632
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The project has been moved to CodeBerg.org.
Update the links in the recipe and also bump to the
latest revision (1.8.19.13).
Additionally fix the link to the IANA PEN registry as IANA
has changed their URL scheme some time ago and the old link
started pointing to the HTML page instead of the text file.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* This doesn't build with any gtk3 DISTRO_FEATURES, without x11 in
DISTRO_FEATURES gtk3+ doesn't provide gdkx.h and paprefs build fails with:
http://errors.yoctoproject.org/Errors/Details/704195/
../paprefs-1.2/src/paprefs.cc:30:10: fatal error: gdk/gdkx.h: No such file or directory
30 | #include <gdk/gdkx.h>
| ^~~~~~~~~~~~
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* in some builds (probably without gobject-introspection-data enabled) it fails to find native glib-mkenums and fails with:
poppler/23.04.0-r0/recipe-sysroot-native/usr/bin/python3-native/python3: can't open file 'poppler/23.04.0-r0/poppler-23.04.0/glib/GLIB2_MKENUMS-NOTFOUND': [Errno 2] No such file or directory
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
==========
- simplify the change for sixelScrolling from patch #374
- add xterm+focus and report+da2, update report+version building blocks in
terminfo, from post-ncurses 6.4
- drop the -title option from uxterm and koi8rxterm, because that interferes
with deriving the default title from the -e option (Debian #1031837).
Compensate for this by using the -class option to derive a default title.
- improve description of readline 2003 mode in ctlseqs.ms
- other improvements to status-line feature
clear status line on DECCOLM
ignore DECSASD if no previous DECSSDT
allow DECSSDT 1 immediately after DECSSDT 2, i.e., without switching back to
host mode.
- adjust RequestResize to avoid shrinking screen when using DECCOLM while the
status-line is active
- disallow wrapping before the beginning of the screen, to the end of the
screen, for cursor-back sequences (Redhat #2182357).
- modify makefile to install the 16x16 xpm files
- update test-package to reflect resolution of Debian #906901.
- change default of showMissingGlyphs to True.
- improve handling of double-sized characters when those happen to be missing
from the bitmap font and/or are fullwidth.
- pointer/overflow fixes
- configure script improvements
- fix a typo in the underline cursor thickness derivation
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
Fixed the threading implementation of servers on Windows.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
#555: Improved progress output when collecting nodes to be less verbose.
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
===========
New Features
--------------
Add support for CLIENT NO-TOUCH (#2745)
Add support for CLUSTER MYSHARDID (#2704)
Add "address_remap" feature to RedisCluster (#2726)
Add WITHSCORES argument to ZREVRANK command (#2725)
Improve error output for master discovery (#2720)
Bug Fixes
----------
Fix XADD: allow non negative maxlen (#2739)
Fix create single connection client from url (#2752)
Optionally disable disconnects in read_response (#2695)
Fix SLOWLOG GET return value (#2732)
Fix potential race condition during disconnection (#2719)
Return response in case of KeyError (#2628)
Fix incorrect usage of once flag in async Sentinel (#2718)
Fix memory leak caused by hiredis in asyncio case (#2694)
Really do not use asyncio's timeout lib before 3.11.2 (#2699)
Maintenance
-----------
Clean PytestUnraisableExceptionWarning from asycio client (#2731)
Add RedisCluster.remap_host_port, Update tests for CWE 404 (#2706)
Updated AWS Elasticache IAM connection example (#2702)
Update CONTRIBUTING guidelines (#2736)
Fix ClusterCommandProtocol type (#2729)
Fix TOPK list example. (#2724)
Improving vector similarity search example (#2661)
Update example of Redisearch creating index (#2703)
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Changelog:
===========
Add classifier for Python 3.11
Add Algorithm.compute_hash_digest and use it to implement at_hash validation example
fix: use datetime.datetime.timestamp function to have a milliseconds
[pre-commit.ci] pre-commit autoupdate
Custom header configuration in jwk client
[pre-commit.ci] pre-commit autoupdate
[pre-commit.ci] pre-commit autoupdate
[pre-commit.ci] pre-commit autoupdate
Add PyJWT._{de,en}code_payload hooks
Add sort_headers parameter to api_jwt.encode
Make mypy configuration stricter and improve typing
Bump actions/stale from 6 to 7
[pre-commit.ci] pre-commit autoupdate
Add more types
Differentiate between two errors
Fix _validate_iat validation
Improve error messages when cryptography isn't installed
[pre-commit.ci] pre-commit autoupdate
[pre-commit.ci] pre-commit autoupdate
[pre-commit.ci] pre-commit autoupdate
Make Algorithm an abstract base class
docs: correct mistake in the changelog about verify param
[pre-commit.ci] pre-commit autoupdate
Bump actions/stale from 7 to 8
[pre-commit.ci] pre-commit autoupdate
Add a timeout for PyJWKClient requests
Add client connection error exception
Add complete types to take all allowed keys into account
[pre-commit.ci] pre-commit autoupdate
Build and upload PyPI package
Fix for issue #862 - ignore invalid keys in a jwks.
Add as_dict option to Algorithm.to_jwk
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Markus Volk
ricoheller
Khem Raj
Wang Mingyu
Alexander Stein
Martin Siegumfeldt
Ming Liu
Mingli Yu
Martin Jansa
Trevor Gamblin
Alexander Amelkin
Petr Gotthard
Fabio Estevam