cmake.bbclass as of oe-core 783fb88 defaults to out-of-tree builds. Use that
functionality instead of OECMAKE_BUILDPATH/_SOURCEPATH which are no longer used.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
cmake.bbclass as of oe-core 783fb88 defaults to out-of-tree builds. Use that
functionality directly to clean up the recipe.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
cmake.bbclass as of oe-core 783fb88 defaults to out-of-tree builds. Use that
functionality instead of passing arguments to EXTRA_OECMAKE and _prepends.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
configure looks in host paths for X, so disable X. This fixes:
ERROR: This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
libelf (elfutils) is required for resolving symbols in DSO and for sdt (taken
from ktap docs). The earlier v0.4 recipe built ktap against libelf if it was
found, thus enable it per default.
FFI needs to be enabled for both userspace and kernel module. Currently, it is
only supported for x86_64 (enforced when building ktap-module).
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This fixes the host contamination when the host has the SQLite3
headers available.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Remove with-libdir as there is no such option and set libdir with --libdir.
Change-Id: Ida67c0c92d19ccc339f16c504055daa8c0d7208a
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add patch to tell autoconf about with-plugin option.
In this way we avoid warnings like:
configure: WARNING: unrecognized options: --with-plugin-maria
Change-Id: Id64ac01d7f2072e1bca8979c5da3e8c6520105cb
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
By default "xuser" cannot execute this binary. So we fix it.
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* unlike BBCLASSEXTENDed native support, dependencies in mariadb-native don't get
automatic -native suffix, so mariadb-native was depending on target ncurses and zlib.
* move the dependency from .inc and apply it with right suffix
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* either fix build to prevent trying to access compiler or don't set
PACKAGE_ARCH, signature is different for different MACHINEs
e.g.
List of dependencies for variable TUNE_ARCH changed from 'set(['X86ARCH32', 'X86ARCH64'])' to 'set([])'
Hash for dependent task gettext_0.18.3.1.bb.do_populate_sysroot changed from 915bae004926e982f835d12f511a5f2b to 24c8263bb82124c9000fff3eab16d293
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* This updates to the 3.4.2 release and rework the packaging splitting
the C bindings in another binary package to reduce footprint in
rootfs; this also moves geos-config to the development package as it
should.
* Fix -dev installation and upgrade path
Using 'lib_package' renames the binaries and we need a transitional
package to be used as upgrade path. This is done using an empty 'geos'
package which installs the new ones as runtime dependency.
This same package is used to satisfy -dev dependency of geos package
allowing for its inclusion into SDK.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The pointercal-xinput has been moved to OE-Core so we should handle it
here.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Below errors only occurs on Ubuntu 13.10:
$arch-linux-libtool: link: g++ ... -o .libs/mysqltest_embedded \
../../libmysqld/.libs/libmysqld.so -ldl
../../libmysqld/.libs/libmysqld.so: undefined reference to `dlopen'
../../libmysqld/.libs/libmysqld.so: undefined reference to `dlclose'
../../libmysqld/.libs/libmysqld.so: undefined reference to `dlerror'
../../libmysqld/.libs/libmysqld.so: undefined reference to `dlsym'
GCC/ld verion on the host:
gcc (Ubuntu/Linaro 4.8.1-10ubuntu8) 4.8.1
GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913
This is a strange behavior on Ub13.10, it fails even '-ldl' in the
link command line. This patch will append '-ldl' to dependency_libs
in libmysqld.la.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Add lua 5.2.2 recipe.
Update:
* remove bitwise_operators.patch that lua uses bit32 library to
support for bitwise operations.
* update uclibc-pthread.patch
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
When enable multilib on x86-64, it fails to build lib32-rsyslog with
error:
| ERROR: Function failed: SYSTEMD_SERVICE_lib32-rsyslog value lib32-rsyslog.service does not exist
It uses wrong value ${PN}.service to set SYSTEMD_SERVICE. Correct it by
using BPN.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* oe-core version of xinput-calibrator installs
30xinput_calibrate.sh and ls -X used in Xsession script sorts it as
last (not respecting the numbers) and xinput-calibrator is executed
too late (after 90xXWindowManager)
* don't forget to update all your components installing Xsession.d
files as well
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Pass LIB_SUFFIX to CMake during a multilib build so that the generated library folder has the correct suffix.
Signed-off-by: Nick D'Ademo <nickdademo@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The 'config' script which gets run returns '../scripts/CONFIG.<machine>', so
the current value was '${datadir}/lmbench/../scripts/CONFIG.<machine>', which
is obviously not ideal. Remove the $SHAREDIR prefix, as the relative path will
work from the scripts dir where lmbench-run runs. With this, we can install
a custom CONFIG.qemux86 into ${datadir}/lmbench/scripts/, for example.
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Pass libdir to EXTRA_OECONF so that recipe generates the correct library folder in a multilib build.
Install shared library symbolic link to image.
Signed-off-by: Nick D'Ademo <nickdademo@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Explicitly set the path to the udev dir to ${base_libdir} in EXTRA_OECONF. Otherwise, the multilib build will fail as it will look for udev in the default location of /lib/udev/.
Signed-off-by: Nick D'Ademo <nickdademo@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Ross Burton
Koen Kooi
Anders Darander
Krzysztof Sywula
Otavio Salvador
Andrei Gherzan
Martin Jansa
Matthieu CRAPET
Christopher Larson
Felipe F. Tonello
David Nyström
Philip Balister
dv@pseudoterminal.org
Khem Raj
Denis Carikli
Jukka Rissanen
Wenzong Fan
Fathi Boudra
Kang Kai
Nick D'Ademo
Zhenhua Luo