Add video camera enable 'VIDEO_CAMERA' for config.txt
Change-Id: I547004eebfba204ba683365bbdbad143f2cdfe6e
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Acked-by: Andrei Gherzan <andrei@gherzan.ro>
The variables RPIFW_SRC_URI and RPIFW_S are created in the common firmware
include file so that it is easier to override the firmware source in a local or
distro config file. RPIFW_SRC_URI is used to set SRC_URI in firmware.inc as it
is common to both bootfiles and vc-graphics. RPIFW_S is used as a prefix for S
in bcm2835-bootfiles.bb and vc-graphics.inc as different subdirectories are
referenced in each recipe.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
This patch fixes the license name for bcm2835 and rpi-first-run-wizard.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
* install_vmcs not needed anymore
* By default package is installed in /opt/vc. Move everything in ${prefix}.
* Move recipe in recipes-graphics
* Add PACKAGE_ARCH = MACHINE_ARCH
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
GPU_MEM
gpu_mem - GPU memory in megabyte. Sets the memory split between the ARM and
GPU. ARM gets the remaining memory. Min 16. Default 64
GPU_MEM_256
gpu_mem_256 -GPU memory in megabyte for the 256MB Raspberry Pi. Ignored by
the 512MB RP. Overrides gpu_mem. Max 192.
GPU_MEM_512
gpu_mem_512 -GPU memory in megabyte for the 512MB Raspberry Pi. Ignored by
the 256MB RP. Overrides gpu_mem. Max 448.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
config.txt allows several overclocking parameters to be tweakes. This makes
the most important ones overridable through local.conf.
Signed-off-by: Julian Scheel <julian@jusst.de>
Add a DISABLE_OVERSCAN variable that can be used in local.conf to overwrite
the overscan default setting.
Signed-off-by: Julian Scheel <julian@jusst.de>
This was done to avoid errors like:
| *** Error: Package name contains illegal characters, (other than [a-z0-9.+-])
while using ipk.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
The first integration of bcm2835 package was done. The package version
is 1.8. BCM2835 package provides access to GPIO and other IO functions
on the Broadcom BCM 2835 chip, allowing access to the GPIO pins on the
26 pin IDE plug on the RPi board.
[GITHUB #35]
Signed-off-by: Aurelian Zanoschi <aurelian17@gmail.com>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
1. Add COMPATIBLE_MACHINE=raspberrypi.
2. This package provides libgl libgles2 and libegl. Add these to
PROVIDES.
3. Add an init script to create vchiq device node while booting. This
device is needed by vc_tvservice_*. Package this init script in ${PN}.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Since these binaries are proprietary and we have no control over them,
skip this innsane check to avoid errors like:
ERROR: QA Issue: No GNU_HASH in the elf binary: '<binary>'
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
There is no need for a mangled kernel image anymore. Precompiled RPI Bootloader
can boot an uncompressed kernel image.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Andrei Gherzan
Gary Thomas
Alexandru Niculita
Paul Barker
Eric Bénard
Jan Schmidt
Julian Scheel
Sander van Grieken
Aurelian Zanoschi