Use protocols=https for GitHub SRC_URIs using the conversion script in
openembedded-core.
Signed-off-by: Marcel Hamer <marcel@solidxs.se>
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
By default in case of CM4 IO board, the USB ports (header + built-in)
are disabled. In order to enable them the DWC2 mode needs to be set to
host.
Signed-off-by: Aurelian Zanoschi <aurelian17@gmail.com>
The raspberry pi 4 variant has a BCM2711 chip, however it still
uses the same boot files as the BCM2835 used in previous generations.
This change generalizes the naming of the directory generated in the
$DEPLOY_DIR to avoid the implication that the files are only
meant for the BCM2835.
Signed-off-by: Jeff Ithier <ithijme@gmail.com>
Current configuration (16MHz) is made for the PiCAN2 board that uses 16MHz crystal. This setting allows for use of Waveshare RS485 CAN HAT that has 8MHz crystal soldered (although according to Waveshare there is also a 12MHz crystal version of the board).
Signed-off-by: Jakub Luzny <jakub@luzny.cz>
Currently ENABLE_CAN adds mcp2525-can0 to the dtoverlay.
ENABLE_DUAL_CAN was added to also add mcp2515-can1 to the dtoverlay.
This will allow a user to enable dual CAN when using a hat like the
PiCAN 2 Duo board.
Signed-off-by: Colin McAllister <colinmca242@gmail.com>
The raspberry pi 4 variant has a BCM2711 chip, however it still
uses the same boot files as the BCM2835 used in previous generations.
This change generalizes the naming of the directory generated in the
$DEPLOY_DIR to avoid the implication that the files are only
meant for the BCM2835.
Signed-off-by: Jeff Ithier <ithijme@gmail.com>
Users who want infrared device tree overlays gpio-ir and
gpio-ir-tx to be set in config.txt can now easily do it through
variable ENABLE_IR, for example in local.conf:
ENABLE_IR = "1"
By default the GPIO pin for gpio-ir is set to 18 and the pin for
gpio-ir-tx is 17. Both pins can be easily changed by modifying
variables GPIO_IR and GPIO_IR_TX (for example in local.conf).
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add support for the Adafruit PiTFT Plus 320x240 2.8" TFT with
Capacitive Touchscreen, using the same patterns used for the other
versions of the PiTFT screens.
Signed-off-by: Erik Botö <erik.boto@gmail.com>
Intuitively, bcm2835-bootfiles:do_deploy should depend on rpi-config:do_deploy.
This indirectly resolves a missing dep between rpi-config:do_deploy and
do_image_rpi_sdimg (on an image recipe inheriting from sdcard_image-rpi.bbclass).
This manifested as changes to rpi-config (e.g. setting or unsetting
ENABLE_* variables) not triggering a rebuild of the SD card image.
Signed-off-by: Chris Laplante <mostthingsweb@gmail.com>
When we read the docs, we have the feelings that theses variables are
boolean ones. So I was setting, for example in my distro.conf file the
variable ' ENABLE_I2C = "1" ' to enable I2C. Then I wanted to disable it
by simply setting 'ENABLE_I2C' to "0" but it wasn't working. So I
noticed that, for example, ' ENABLE_UART ' was checked with ' = "1" '
condition and some other "boolean" was checked against ' -n ' like for
ENABLE_I2C.
This commit tries to have an uniform behavior for all variables that are
shown in the doc under the format ' VARIABLE = "1" ' to enable them and
the reader can think they are kind of 'boolean' values.
Signed-off-by: Joël Carron <joel.carron@eeproperty.ch>
vc4-fkms-v3d needs dispmanx, its DRM VC4 V3D driver on top of the dispmanx
display stack, this does not work with 4.14 kernel and since we always
use vc4graphics on 64bit, just keep using vc4-kms-v3d dtbo which should
enable right graphics
Tested with core-image-sato, running glxgears with 55.5fps in
raspberrypi3-64
Signed-off-by: Khem Raj <raj.khem@gmail.com>
RDEPENDS is fairly meaningless for recipes which don't create a package to be
installed into the rootfs. Instead we should be using DEPENDS to guarantee
correct ordering of build tasks.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
We have a few recipes which only deploy files that go into the boot partition
and do not create packages to be installed into the rootfs. These recipes don't
need to run the usual packaging tasks so we can drop them to speed up the build
a little.
We also have a bunch of recipes that don't need the usual toolchain as they just
copy files or invoke native commands like `mkimage`. So to speed up the build a
little more we can set INHIBIT_DEFAULT_DEPS to avoid an unnecessary dependency
on the toolchain.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Added support for and documented the following new extra build options:
* gpu_freq overclocking option
* disable boot rainbow splash screen
* configure the boot delay after GPU firmware loading
* configure common HDMI and composite video options
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
The variable RPI_EXTRA_CONFIG can be set in local.conf to append text to the
Raspberry Pi config.txt file as described in the documentation.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Use correct overlay for enabled vc4 accelaration
This enable 3D accelaration over dispmanx on vc4/rpi64
Enable audio over HDMI
Disable overscan to avoid graphics glitches
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* bitbake is using re.match, so raspberrypi actually matches with anything
^raspberrypi.* which currently works, but it will also match with hypothetical
raspberrypi-is-no-more-this-is-banana-now MACHINE which isn't intended by
this COMPATIBLE_MACHINE.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This MACHINE_FEATURE will automatically add the recommended
Adafruit configuration line to the Raspberry Pi config.txt.
Signed-off-by: Rob Woolley <rob.woolley@windriver.com>
Commit da32aac introduced an invalid shell variable name in do_deploy():
according to bash manpage variable names cannot contain dots. Replace
dot with underscore to fix it.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Add support for the Waveshare 1024x600 "C" Rev2.1 7" IPS Capacitive Touch
Screen LCD with HDMI interface:
http://www.waveshare.com/7inch-HDMI-LCD-C.htmhttp://www.waveshare.com/wiki/7inch_HDMI_LCD_(C)
This product works "out of the box" with the Raspberry Pi. Simply connect
the provided HDMI and USB cables between the two devices. The touch<=>mouse
integration works automatically.
Tested with a Raspberry Pi 3, with a 32-bit raspberrypi3 build.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
The support for PiTFT 28 inch resistive touchscreen is optional
and can be enabled by adding below in local.conf:
MACHINE_FEATURES += "pitft pitft28r"
While at it also fix a minor typo in README.
Signed-off-by: Petter Mabäcker <petter@technux.se>
- Add support to build overlays for PiTFT22 in the kernel.
- Setup a basic configuration for the driver
The PiTFT22 support is optional and can be enabled by adding below in
local.conf:
MACHINE_FEATURES += "pitft pitft22"
This patch also includes restructuring of kernel patches per kernel version
specific directories.
[Support #70]
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Add basic support for PiTFT display by using device-trees.
In order get it working below configurations must be active in
local.conf:
MACHINE_FEATURES += "pitft"
- This will enable SPI bus and i2c device-trees, it will also setup
framebuffer for console and x server on PiTFT.
[Support #70]
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
With newer kernels (>=3.18) that supports device-trees I2C
should be enabled with device-trees.
This is now support by adding:
ENABLE_I2C = "1"
in local.conf
This will enable the dtparams:
i2c1
i2c_arm
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
With the newer kernels that use device tree, the SPI bus is only
enabled by a device tree setting. This is now supported by adding
ENABLE_SPI_BUS = "1"
in local.conf
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Marcel Hamer
Aurelian Zanoschi
Jeff Ithier
Jakub Luzny
colin
Andrei Gherzan
Leon Anavi
Erik Botö
Paul Barker
Chris Laplante
Carton
memox_5
Fabien Lahoudere
Khem Raj
Hugo Hromic
Anton Gerasimov
Peter A. Bigot
Eduardo Abinader
Paul Barker
Ricardo Salveti
Martin Jansa
Rob Woolley
Andrea Galbusera
Trevor Woerner
Herve Jourdain
Theodor Gherzan
Petter Mabäcker
Gary Thomas
Jonathan Liu