It is already applied on upstream, see u-boot rev,
564d99d0723e338792df6897dc7407df2cf6196d
Fixes:
ERROR: u-boot-1_2025.07-r0 do_patch: Applying patch '0001-rpi-always-set-fdt_addr-with-firmware-provided-FDT-address.patch' on target directory '/workspaces/ls/linux-distro/build-ls-rpi4/tmp/work/ls_rpi4-limonsoftware-linux/u-boot/2025.07/sources/u-boot-2025.07'
CmdError('quilt --quiltrc /workspaces/ls/linux-distro/build-ls-rpi4/tmp/work/ls_rpi4-limonsoftware-linux/u-boot/2025.07/recipe-sysroot-native/etc/quiltrc push', 0, 'stdout: Applying patch 0001-rpi-always-set-fdt_addr-with-firmware-provided-FDT-address.patch
patching file board/raspberrypi/rpi/rpi.c
Hunk #1 FAILED at 318.
1 out of 1 hunk FAILED -- rejects in file board/raspberrypi/rpi/rpi.c
patch unexpectedly ends in middle of line
Patch 0001-rpi-always-set-fdt_addr-with-firmware-provided-FDT-address.patch can be reverse-applied
Signed-off-by: Anibal Limon <anibal@limonsoftware.com>
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Increase CONFIG_SYS_BOOTM_LEN for machine raspberrypi4 (32-bit)
because the kernel size has increased. This fixes the following
issue when booting an image with U-Boot:
Image Name: Linux-6.6.63-v7l
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 8559752 Bytes = 8.2 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Booting using the fdt blob at 0x2eff2000
Working FDT set to 2eff2000
Loading Kernel Image to 8000
Image too large: increase CONFIG_SYS_BOOTM_LEN
Must RESET board to recover
Fixes: https://github.com/agherzan/meta-raspberrypi/issues/1306
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
This patch had been merged into u-boot upstream. Its commit is
29f7d05a347a("dm: core: Move ofdata_to_platdata() call earlier").
So, remove the randundant patch to avoid building error.
Signed-off-by: Meng Li <Meng.Li@windriver.com>
With stock u-boot v2020.01 which we use from poky CM3 module won't boot.
We need to apply this patch in order to have platform again working.
Add it only for cm3 to not break anything else.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Add fw_env.config that uses at run-time /boot/uboot.env generated
through the boot scripts (specifically boot.cmd.in) from recipe
rpi-u-boot-scr. This configuration file is required to
successfully run fw_printenv from the user space.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
The patch 0003-Include-lowlevel_init.o-for-rpi2.patch does not apply on
2016.11 and causes an build error.
Patch 0002-rpi-passthrough-of-the-firmware-provided-FDT-blob.patch
provides the inclusion of lowlever_init.o.
Signed-off-by: Mirza Krak <mirza.krak@gmail.com>
A patch is backported to check if the firmware loaded a device tree blob
into memory and set the fdt_addr variable if it is found. The U-Boot
script will then read the command line arguments generated by the
firmware from the device tree and boot the kernel with the command
line arguments and the loaded device tree.
This allows things like MAC address, board revision and serial number
to be correctly configured and options in config.txt to be used.
An additional patch is backported and further changes are made to support
this.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
