Raspberry Pi 4 doesn't have a working USB driver in u-boot. This makes
the defconfig not to enable the relevant config case which breaks the
build with:
error: expected '}' before
'BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB'
This was fixed in upstream and we backport the relevant commit.
Signed-off-by: Andrei Gherzan <andrei@balena.io>
The upstream branch might suffer rebases due to effort of pushing the
patches upstream. To avoid issues, let's have here the patches we need
for RPi 4 support.
These patches are backported on the u-boot version in warrior.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
When we read the docs, we have the feelings that theses variables are
boolean ones. So I was setting, for example in my distro.conf file the
variable ' ENABLE_I2C = "1" ' to enable I2C. Then I wanted to disable it
by simply setting 'ENABLE_I2C' to "0" but it wasn't working. So I
noticed that, for example, ' ENABLE_UART ' was checked with ' = "1" '
condition and some other "boolean" was checked against ' -n ' like for
ENABLE_I2C.
This commit tries to have an uniform behavior for all variables that are
shown in the doc under the format ' VARIABLE = "1" ' to enable them and
the reader can think they are kind of 'boolean' values.
Signed-off-by: Joël Carron <joel.carron@eeproperty.ch>
vc4-fkms-v3d needs dispmanx, its DRM VC4 V3D driver on top of the dispmanx
display stack, this does not work with 4.14 kernel and since we always
use vc4graphics on 64bit, just keep using vc4-kms-v3d dtbo which should
enable right graphics
Tested with core-image-sato, running glxgears with 55.5fps in
raspberrypi3-64
Signed-off-by: Khem Raj <raj.khem@gmail.com>
[Issue #239] -- https://github.com/agherzan/meta-raspberrypi/issues/239
The patch 0002-rpi_0_w-Add-configs-consistent-with-RpI3.patch has been
applied to the upstream U-Boot repo and is now in the release that
openembedded-core uses so remove it from meta-raspberrypi's U-Boot
bbappend.
Signed-off-by: Jonathan Haigh <jonathan.haigh@arm.com>
RDEPENDS is fairly meaningless for recipes which don't create a package to be
installed into the rootfs. Instead we should be using DEPENDS to guarantee
correct ordering of build tasks.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
We have a few recipes which only deploy files that go into the boot partition
and do not create packages to be installed into the rootfs. These recipes don't
need to run the usual packaging tasks so we can drop them to speed up the build
a little.
We also have a bunch of recipes that don't need the usual toolchain as they just
copy files or invoke native commands like `mkimage`. So to speed up the build a
little more we can set INHIBIT_DEFAULT_DEPS to avoid an unnecessary dependency
on the toolchain.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Added support for and documented the following new extra build options:
* gpu_freq overclocking option
* disable boot rainbow splash screen
* configure the boot delay after GPU firmware loading
* configure common HDMI and composite video options
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
There hasn't been a tagged version of the firmware lately, but there have been
several bugfixes listed in the commit history and we're about to move to v4.14.y
as the default kernel so let's get up-to-date.
The actual commit used is the most recent change to the firmware files as of
2018-02-26, the most recent commits which only change the kernel image and other
files we don't use are ignored.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
This makes the defconfig more consistent with the RPi 3 and
CONFIG_OF_EMBED is needed to get the RPi firmware provided
DTB to function.
Recently removed by:
a50e19695f u-boot: drop upstreamed patches in v2018.01
however this change missed the cutoff for v2018.01
Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
This makes the defconfig more consistent with the RPi 3 and
CONFIG_OF_EMBED is needed to get the RPi firmware provided
DTB to function.
Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
Added patch status information in patch header, and re-word of commit
message
Signed-off-by: Mirza Krak <mirza.krak@endian.se>
The variable RPI_EXTRA_CONFIG can be set in local.conf to append text to the
Raspberry Pi config.txt file as described in the documentation.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Martin Jansa
Andrei Gherzan
Andrei Gherzan
Carton
Khem Raj
memox_5
Zahari Petkov
Pepijn de Vos
Fabien Lahoudere
Andrei Gherzan
Hugo Hromic
Anton Gerasimov
Peter A. Bigot
Jonathan Haigh
Eduardo Abinader
Paul Barker
Drew Moseley
Andrea Galbusera
Ricardo Salveti
Mirza Krak