omapzoom has been down since a long time. Point the repository to the
mirror in git.ti.com
Reported-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Early boot of remote processors from SPL stage of bootloader requires
the remoteproc firmware to be present in the boot partition. Deploy this
rproc IPC firmware so that it can be copied to the boot partitions of
the wic images.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Add a SECURITY file with hints for security researchers and other
parties who might report potential security vulnerabilities.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
This upgrade contains the following changes:
* updated hostapd path in ap_start.sh
* ap_stop.sh removes wlan1 interface
* hostapd.conf updated to work seamlessly with hostapd 2.10
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update SRCREV for jailhouse recipe which will add changes for Out of Box
demo and also a new application to test whether the linux inmate cell has
crashed or not.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This patch moves the jailhouse recipe general variables to a
ti-jailhouse.inc file along with fetch and compile task.
Jailhouse repo also contains some demo applications which can
be packaged alone in filesytem and does not require packaging
jailhouse module, firmware and tool.
So add a new recipe jailhouse-inmate which can be used to only
package those demos. The existing jailhouse recipe will contain
variables and other dependencies needed for do_install task for
jailhouse module, tools, demos etc. The do_install of jailhouse
inmate recipe will only package demo applications.
This new recipe(jailhouse-inmate) will be added to a new image
in meta-arago. The new image will be used for jailhouse second
linux instance or cell.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Remove config files from /usr/share/jailhouse as they are not required.
Package only the cell files for respective devices and not all k3 files.
Update FILES:PN to use wildcard.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update SRCREV for ti-jailhouse. All the patches which was being applied via yocto
have been moved to ti-jailhouse repo now. So remove the patches from SRC_URI and
files.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add support for ti-extras for am62pxx to control the kernel and u-boot
repos, branches, and srcrevs via the TI_EXTRAS variable in the local.conf
file.
Also add am62pxx as compatble machine in jailhouse recipe. So the am62pxx
jailhouse build can be done by adding TI_EXTRAS=tie-jailhouse in local.conf.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upgrade to v6.3.0 version.
This release adds resources for using AM243x & AM64x PRU cores with cores
running FreeRTOS:
* The RTOS Getting Started Labs
* Examples for using PRU GPIO and the broadside interface
* SORTE_G example (a custom networking interface)
Bug fixes:
* AM64x & AM65x header files, fix the names of extended sections to be in the
format of
ConstantsTableName_0x100
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the QA checks done on the build artifacts to include [buildpaths] since
the PRU linker includes these paths in its output. This avoids build warnings
or errors of the type:
pru-icss-6.2.0-r1 do_package_qa: QA Issue: File /lib/firmware/pru/PRU_Halt.out in package pru-icss-halt contains reference to TMPDIR [buildpaths]
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upgrade to v6.2.0 version.
This release supports Linux kernel 6.1.
The RPMsg library in previous versions of the PSSP will not work with
the PRU RPMsg drivers in Linux kernel 6.1.
Other changes in this version:
* Bug fixes:
- Getting Started Labs, fix "zero" command clearing too many bytes
- Include files, add a missing parentheses to pru_cfg, pru_ctrl, pru_ecap
* Update ReadMe files to point to the latest URLs
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There are some features that will either never be accepted into the
upstream kernel, or are not ready to be accepted. ti-extras allows for
controlling the kernel and u-boot repos, breanches, and srcrevs to gain
access to those features via the TI_EXTRAS variable in the local.conf
file.
Initial support for TI_EXTRAS=tie-jailhouse is being added by this
patch.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Acked-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There is only one user of these include files, expand the files inside
the one user and remove the includes.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This file should be whittled away over time, remove currently unused
paths to help us take inventory of what remains.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add and enable Jailhouse support for TI's k3-am625-sk similarly to how other
TI platforms were added and enabled in the past by adding platform-specific
configuration variables for the root cell DTB overlay, and the Linux demo inmate
DTB, configuration, and Kernel command line settings.
Migrate the jailhouse recipe to kirkstone from dunfell.
Switch to latest upstream source tree for jailhouse. The TI Jailhouse repo has
gone stale and now upstream is really the happening place where new development
happens including for new devices such as AM62x. Hence go ahead and switch to
using the upstream repo.
Update the platform-specific config files to such that the root cell DTB overlay
gets included in the file system images.
Enable additional console on ttyS3 (usually mapped to main_uart1) and ttyS2 for
the Linux demo inmate to use.
Add patches for the Jailhouse source tree for am62xx.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Small changes, the "upstream" doesn't look to be maintained anymore,
so if we get any more breaks it might be time to remove this recipe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Since this directory path will not change, let's avoid use
of ti-paths.inc which is set to be removed.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
UIO drivers are generally frowned upon in the community, and for PRU
we now have much better alternatives in RProc, RPmsg, and PRU-Consumer.
Let's not send the wrong message by continuing to support this crufty
interface. Remove the kernel module, DTBs, and test recipe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These URIs have been updated in dunfell, but two instances were
forgotten in kirkstone/master.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The meta-ti-bsp layer is still broken for K3 HS platforms.
The patch [1] makes the check-layer happy again as it does not
fail any more during bitbake parsing but it will be difficult
for the end user to discover this dependency on meta-ti-extras.
On the other side, meta-ti-extras depends on meta-ti-bsp so
this is a circular dependency.
Currently the layer is broken for am62xx-evm/am64xx-evm machines:
| ERROR: Nothing PROVIDES 'ti-k3-secdev-native' (but mc:k3r5:/srv/oe/build/conf/../../layers/meta-ti/meta-ti-bsp/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb DEPENDS on or otherwise requires it). Close matches:
| libtspi-dev-native
| makedevs-native
[1] - 8e43835c ti-sci-fw: make dependency on meta-ti-extras soft
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Now that we have SoC names, we can avoid adding features based on the
board name. We expect folks to create their own boards based on these
SoCs, and so using the TI made EVM board name everywhere adds extra churn
when adding a new board. Plus it is more correct for most of these
features as they depend on the SoC, not on the EVM board.
One other thing we do here is to not use the generic "j7" name,
the current and future J7 devices are far to feature diverse
to group at this level. Grouping like that will lead to the wrong
things getting enabled as new J7 SoCs are added.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Cleanup and unify again - omapl138-lcdk is the only platform supported in
the OMAP-L1 family. Plus there's no longer DaVinci family with corresponding
settings. Adjust accordingly.
Please note, there's currently a bug building Rust on ARMv5 platforms:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=14967
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Include ti-paths.inc so TI_K3_SECDEV_INSTALL_DIR_RECIPE gets defined and
artifacts are installed in the correct location.
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Fixes this warning:
| WARNING: dsptop-1.4.0-r2.2 do_package_qa: QA Issue: dsptop: /usr/bin/dsptop is owned by uid 1000,
| which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Fixes these warnings:
| WARNING: libdce-3.00.14.00-r1 do_fetch: URL: git://git.omapzoom.org/repo/libdce.git;protocol=git
| does not set any branch parameter. The future default branch used by tools and repositories
| is uncertain and we will therefore soon require this is set in all git urls.
| WARNING: libdce-3.00.14.00-r1 do_unpack: URL: git://git.omapzoom.org/repo/libdce.git;protocol=git
| does not set any branch parameter. The future default branch used by tools and repositories
| is uncertain and we will therefore soon require this is set in all git urls.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This commit adds the PRU Software Support Package (PSSP) to the AM62x Linux
Processor SDK under example-applications/pru-icss-x.x.x. It also adds prebuilt
PRU firmware to the default AM62x filesystem image under the /lib/firmware
folder.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the SDK folder example-applications/pru-icss-x.x.x to install the latest
version of the PRU Software Support Package (PSSP).
This also uses PSSP v6.1.0 to generate the PRU Halt and RPMsg binaries in the
Linux SDK default filesystem image under /lib/firmware.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
bitbake git fetcher warns about protocol and fall back branches
therefore be explicit about these parameters in source uri
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add README for the newly added meta-ti-extras layer and update the maintainer.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Firmware images should always be installed under /lib and hence should use
nonarch_base_libdir, as regular base_libdir is configuration-specific and
doesn't always resolve to /lib.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Move TI Unified Instrumentation Architecture in C (cUIA) to meta-ti-extras under
recipes-devtools.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Some .inc file now span across layers, so use fuller path to find them when
including.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Those were moved from meta-ti-bsp and used by CodeGen Tools.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Nishanth Menon
Aniket Limaye
Ryan Eatmon
Sabeeh Khan
Paresh Bhagat
Denys Dmytriyenko
Praneeth Bajjuri
Andrew Davis
Trevor Woerner
Matthias Schiffer
Jose Quaresma
Khem Raj
Nick Saulnier
Alessio Igor Bogani