Set DEFAULTTUNE optimization in BSP from specific Cortex level to more generic
armv7a, but keep thumb, neon and hard-float options enabled due to numerous BSP
components requiring them. While enabling additional Cortex optimization might
gain a tiny performance improvement, it makes binary feeds incompatible between
A8, A9 and A15 machines, leads to unnecessary rebuilds and hides potential
packaging or recipe issues. Hence the decision to enable Cortex optimization
should be left to the Distro.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Correct the name of the variable used to define the size of the logo:
GUI_MACHINE_CLASS renamed MACHINE_GUI_CLASS.
Signed-off-by: Thomas Perrot <thomas.perrot@tupi.fr>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Enable "sgx" feature on all - the driver may still be missing, but GLES is
available from omap5-sgx-ddk-linux package
* Enable "touchscreen" feature only on dra7 and am57 - not available on omap5
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
* Create the dra7xx.inc file which inherits the omap-a15.inc file
and then adds the dra7xx as another valid SOC_FAMILY setting.
* The addition of the dra7xx SOC_FAMILY is done while still keeping
access to the omap-a15 family. What this means is that omap-a15
can apply to omap5-evm, dra7xx-evm, and am57xx-evm. Then the
dra7xx family can be used to differentiate between omap5 and
dra7xx based devices.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
k2l-evm machine config shares the same Keystone SoC family, it has K2L EVM
specific machine configuration for UBI image, boot monitor, U-boot, etc.
Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Remove the RDEPENDS for the am33x-cm3-initscript package since
the latest kernel source use the hotplug functionality to load
the firmware.
* Updated the SRCREV to the latest kernel sources which include
the hotplug fix.
* Bump the MACHINE_KERNEL_PR for the am335x and am437x devices
which are affected.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* By setting the UBI_VOLNAME variable the default name for the
UBI rootfs will match the default used by u-boot so images
built through OpenEmbedded will work with out-of-box u-boot.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The VPE firmware should only be added for the dra7xx-evm
machine type since that is the device with the VPE IP.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* New Graphics SDK with am43x support has been added.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Now the DRA7xx support is fully merged into upstream u-boot
then we can remove setting the PREFERRED_PROVIDER for
u-boot and virtual/bootloader to u-boot-dra7xx and instead
pick up the default setting from the omap-a15.inc file.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* For am335x and am437x, the kernel and u-boot expects the ubifs volume name
to be set to "rootfs".
* Set UBI_VOLNAME variable to "rootfs" so that the ubifs files generated by OE
will work.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
To be used with latest u-boot that prefers zImage over uImage
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
* To be used with latest u-boot, that prefers zImage over uImage
* ti33x will follow as soon as u-boot changes its default for that platform
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Tom Rini <trini@ti.com>
* Add the omap5-panda.dts file as a supported DTS to be built.
This file is for use on the panda and uEVM boards.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the machine configuration for the OMAP5 EVM device.
* Create the omap-a15.inc file to be shared with all OMAP
Cortex-A15 derivative devices.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SDKs or other users of meta-ti can still use one of the other recipes for
stability or featureset, by setting PREFERRED_PROVIDER in their config.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SDKs or other users of meta-ti can still use one of the other recipes for
stability or featureset, by setting PREFERRED_PROVIDER in their config.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SDKs or other users of meta-ti can still use one of the other recipes for
stability or featureset, by setting PREFERRED_PROVIDER in their config.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SDKs or other users of meta-ti can still use one of the other recipes for
stability or featureset, by setting PREFERRED_PROVIDER in their config.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
SDKs or other users of meta-ti can still use one of the older 3.2 recipes for
stability or featureset, by setting PREFERRED_PROVIDER in distro or local config.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
* Update SRCREV for the recent merges in TI staging tree, still 3.8.2
* Bump MACHINE_KERNEL_PR to trigger rebuilding out-of-tree components
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* There is no support for these platforms from meta-ti.
* If someone is willing to maintain them, please let us know or feel free to
take it to a separate layer.
* Therefore, remove SoC and machine configs, kernel, u-boot and X11 configs
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Denys Dmytriyenko
Thomas Perrot
Jacob Stiffler
Maupin, Chase
Hao Zhang
Sam Nelson
Franklin S. Cooper Jr