Rogue graphics driver 24.1 currently fails to build against the kernel
that enables FORTIFY_SOURCE, such as bb.org. Disable this config for now,
until the driver is fixed.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Most Beagle platforms are switching to 6.6 based Linux kernel and U-boot
2024.10. Add corresponding recipes and extend beagle-bsp with required
settings.
BeagleY-AI for now remains on 6.1 BSP with U-boot 2023.04.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Rename "bb_org" BSP recipes to include version in the recipe names.
This way we can support multiple versions.
Also remove 2 unused kernel patches that were needed for 5.10
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Move "bb_org" kernel and U-boot providers that use corresponding official
BeagleBoard.org trees into own meta-beagle layer.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Extract "bb_org" BSP specific settings from beagleplay-ti in meta-ti-bsp and
move them to own beagleplay machine config in meta-beagle.
The differences between 2 configs are minimal, hence beagleplay in meta-beagle
inherits beagleplay-ti from meta-ti-bsp as a base and only adjusts what's
needed.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
OE-Core master has switched from lz4c to lz4 host tool, but a corresponding
change only appears in kernel 6.13. Since bb.org kernels 6.1 and 6.6 enable
LZ4 compression by default, also add a legacy lz4c tool in the list.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
The new meta-beagle will host all supported Beagle platforms that
use TI SoCs and hence need to depend on meta-ti-bsp. The default
BSP for the platforms in this layer will use BeagleBoard.org
official trees for the Linux kernel and U-boot.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
BeaglePlay is officially supported by TI "ti-6_6" BSP and is part
of the TI-SDK releases. Switching BSP to BeagleBoard.org "bb_org"
settings for the same machine is possible within the same layer.
But having different machine configs for the same machine name in
multiple layers can be confusing and prone to errors. Hence rename
the config to indicate BeaglePlay with official TI support in order
to re-use the canonical name in a separate layer.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
All other firmware recipes are in recipes-bsp. There is nothing much
special about this set of firmware so move it to match.
This firmware is the pre-compiled "echo test" example for various
remote cores. The directory name is not very clear on that, so fix
that up too.
Signed-off-by: Andrew Davis <afd@ti.com>
As the patch that added these states, this is an ugly hack, the issues
involved are fixed and no longer relevant, remove this.
Signed-off-by: Andrew Davis <afd@ti.com>
We use the makefile shipped with the firmware to deploy the firmware
instead of just manually moving it in the install step. But the makefile
doesn't do the right thing, so we also modify the makefile. Skip all
this and just move the firmware ourselves.
Signed-off-by: Andrew Davis <afd@ti.com>
Early Boot of remote processors is supported at the SPL stage of the
bootloader. Currently, SPL looks for the remoteproc firmwares in the
boot partition.
Therefore, add the rproc firmware to the boot partition of wic images.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Early boot of remote processors from SPL stage of bootloader requires
the remoteproc firmware to be present in the boot partition. Deploy this
rproc IPC firmware so that it can be copied to the boot partitions of
the wic images.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
This package provides Linux-side components for TI IPC and depends on
virtual/kernel Linux kernel for the build, so it is not compatible with
non-Linux builds, such as k3r5 baremetal multiconfig. Hence adjust
COMPATIBLE_HOST accordingly.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
This IPC example is no longer supported nor recommended for new designs.
The documentation is no not available either (was on Processors Wiki).
Remove this example.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add a SECURITY file with hints for security researchers and other
parties who might report potential security vulnerabilities.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
Bump versions of mesa-pvr and ti-sgx-ddk-km to support SGX with kernel
6.6 and the same version of mesa rogue is using.
Enable SGX by default in the 6.6 BSP provider section logic.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The mesa.inc that we inherit from oe-core now has the required
parameters. This conditional append is no longer required.
This reverts commit dbc6afc46e.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
PREFERRED_VERSION matches against the PV in the recipe, not against the
file name. With the upcoming 6.12, the 6.1 kernel version string was a
little too loose. The "6.1%" could glob onto the 6.12 recipe. Take
this time to also clean up a couple of the other versions and narrow
them down.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add bsp-ti-6_12 overrides in A53 & R5 machine configuration
to ensure it picks the appropriate u-boot configs for beagleplay
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are planning on adding upstream u-boot testing against stable tagged
versions of u-boot and need a little more control over telling bitbake to
not point at a branch but point to a tag.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update to the latest u-boot release v2024.10.
Additionally, take this time to clean up the mainline recipe and
streamline it a bit.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Our upstream testing needs to point to both master and master-next and
we need two different recipes to track that. This recipe mirrors the
linux-ti-next recipe and points to the master-next branch for the latest
bleeding edge changes.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
It was suggested to move the reproducibility patches out of
ti-kernel.inc and into the respective recipes.
Taking this time to also rework all of the pieces that go into the SRC_URI
and create a standardization for how all of the kernel recipes are done.
Create KERNEL_GIT_URI, KERNEL_GIT_PROTOCOL, KERNEL_GIT_BRANCH,
KERNEL_DEFCONFIG, and KERNEL_REPRODUCIBILITY_PATCHES. The default for
the above new variables is to the git.ti.com repository and how we manage
the kernel settings. The other kernel recipes that do something other than
how TI does it can simply override the variables.
This change will make it easier to perform the upstream testing that we
do on a nightly basis. Additionally, it will simplify the auto generation
of the patches to move the mainline (stable kernel) recipes since the
required patches will be all done in the same recipe.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Resolve some issues with J721E and compressed NPOT (Non-Power-Of-Two)
textures.
Also, add some additional allocation tracking in render process specific
tasks.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We got a bit more time to do a proper migration this time. A discovery
period to see what actually works and boy, it wasn't much.
This update resolves issues with:
- Macro redefinition
- Sparse NPOT texture allocations
- vec4 reductions
- Mesa image extensions
- Buffer allocations under weston
- Devices with both a RENDER and PRIMARY display node
- Underprivileged users being unable to allocate buffers
- Removed call to drm_map_legacy
- Replace deprecated kernel calls
- Fix some cache attributes for userspace allocations
- About 40 other various errors and warnings
This core was never fully GLES2 conformant. In fact, if you try to run
cts on any of the older releases you'll find yourself in a hardware
recovery loop pretty quickly. We've gotten it to about 94.2% conformance
with these patches.
There are still dragons here, but they are at least a little more
manageable.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The next Yocto Project release is called walnascar and OE-Core master branch
is now marked accordingly. Add layer compatibility with walnascar.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We were missing controlling the versions for linux-ti-staging-rt and
linux-ti-staging-systest using the BSP framework. Since the
PREFERRED_VERSION is not tied to the virtual/kernel we need two
additional settings for those alternate kernel package names.
For BSPs that do not have the -rt and -systest recipes then the two
new variable settings should effectively be ignored and cause no issues.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Denys Dmytriyenko
Andrew Davis
Aniket Limaye
Aashvij Shenai
LCPD Automation Script
Ryan Eatmon
Chirag Shilwant
Judith Mendez
Rishikesh Donadkar
Randolph Sapp
Manorit Chawdhry