This patchset was pulled from u-boot patchwork and aren't final, but testing
on beaglebone shows it to work.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
It has been completely replaced with the 'pandaboard' machine config.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Changes from the original patch:
* Matrix is no longer available, no fixes necessary
* Most of the recipes-ti/ was cleaned up by Koen's earlier patch
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
beagleboard provides a correct fw_env.config file so add to the SRC_URI
and RRECOMMENDS on u-boot-fw-utils.
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Now that u-boot-fw-utils is a separate recipe (in oe-core) we do not
want to try and build the tools here. We also want to package the
fw_env.config file in the main package, if it exists.
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This adds a fw_env.config file that is valid for BeagleBoard's
with NAND for U-Boot environment.
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
u-boot wants GNU ld and cant link with gold
so when default linker is gold we make sure
that it still uses good old GNU ld
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
It will now deploy:
u-boot-<machine>-<version>.suffix
u-boot-<machine>.suffix (symlink)
u-boot.suffix (symlink)
And additionally for SPL builds:
MLO-<machine>-<version>
MLO-<machine> (symlink)
MLO (symlink)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
These are some fixes suggested by Jason Kridner to fix the PMIC
instabilities we've been seeing over USB power.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Cc: Jason Kridner <jdk@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
This patch fixes the case where the EEPROM is programmed but we still use the
fall back case to detect the bone board. Now that EEPROMs are programmed, we should
correctly detect the bone board instead of relying on fall back to bone mode.
PR bumped
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Updated to latest version to pick up the following changes:
* 9158d7f am335x: Really correct NAND partiton layout
* 4723773 am335x: Wrap spl_board_init in a CONFIG_SPL_BOARD_INIT check
* 40c310c Change CPU to 720MHz and bump VDD1 to 1.26V
* 9c154ee Add missing i2c0 pin mux configuration in spl_board_init
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
* Tree moved to arago-project.org
* Remove i2c releated voltage change writes that were a nop
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
There is a v2011.09 tag on the mainline, but I haven't seen a release
notice go out. It didn't make sense to me to try to carry-forward those
all patches since the release tag, so I simply picked the latest tag
in the maineline.
Patched and tested on BeagleBoard-xM revision C.
USB Ethernet was tested with:
setenv usbethaddr de:ad:be:ef:00:01
usb start
dhcp^C
setenv ipaddr 10.0.1.2
ping 10.0.1.1
USB Storage was tested with:
<above>
usb part
fatls usb 0
led command was tested with:
led all off
led all on
led 1 on
led 1 off
gpio command tested with:
gpio input 4
<hold USER button>
gpio input 4
<release USER button>
Also performed boot test.
Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Koen Kooi
Khem Raj
Tom Rini
Peter A. Bigot
Otavio Salvador
Joel A Fernandes
Denys Dmytriyenko
Jason Kridner