U-Boot with binman will do the signing as these images are packaged.
Do not rename the DM image as the signed image.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
U-Boot with binman will do the signing as these images are packaged.
Remove signing steps here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
U-Boot with binman will do the signing as these images are packaged.
Remove signing steps here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The platforms with combined boot image have full names for tiboot3.bin
and to keep things consistent we can do the same here. Deploy these files.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The platforms with combined boot image have full names for tiboot3.bin
and to keep things consistent we can do the same here. Deploy these files.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In U-Boot the names of these files have been updated to match our
expected defaults. Remove these fixups.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The defaults set in am62xx.inc are correct now and these can be dropped.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Everything is the same, so just include the non-HS config to set vars.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Everything is the same, so just include the non-HS config to set vars.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The HS boards use the SR2 version of the silicon, ship that version
of the sysfw.itb image.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These are not used anymore and most have been removed, these look
to be leftovers, remove them.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the ti-rpmsg-char library to 0.6.1 version to fix rpmsg_ctlr
id on v6.1 kernel when multiple channels are created.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This converts ti-sci-fw into a standard firmware provider package. We do
not need to do anything additional here with that firmware as U-Boot now
does that for us with binman.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This will no longer build after we switch away from k3-image-gen. Remove
this version and make 2023.04 the default.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This will no longer build after we switch away from k3-image-gen. Remove
this version until it can be rebased on the latest U-Boot with binman
support. For now switch current users of this over to u-boot-ti v2021.01.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
K3-image-gen is going away and we don't do SRCIPK packages like this
anymore anyway. Remove this recipe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Set the variables needed to put the DTBs into the same vendored
directory structure as they are in the kernel.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the version and explicitly package all Khronos APIs separately.
This should be nice for those folks that want a headless opencl system
for tinkering and such.
This version includes experimental GEM support (for applications like
Chromium that like to poke at the render node) and a new Vulkan ICD
loader interface for better support with the Vulkan ICD loaders present
in Yocto.
This lifts a method from mesa used to force a common naming convention
for Vulkan, OpenCL, and OpenGLES libs to make things a little easier to
follow. Without it the target package names get scrambled based on the
shared object name.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Move recipes to new subdir since we offer more than just libgles now.
Reusing the naming convention of the subdirectory used for the km
components for now.
Signed-off-by: Randolph Sapp <rs@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There is only one user of these include files, expand the files inside
the one user and remove the includes.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This file should be whittled away over time, remove currently unused
paths to help us take inventory of what remains.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Minor changes to match with Kirkstone for consistency.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Cleanup the J* APM patch a little. Apparently I could have stood to read
the docs a little more. Found some better runtime pm functions and also
discovered something new about the power island definition.
Notes from upstream:
- Add the CCB coherency HACK from DDK 1.15 to improve stability
on J* devices
- Fix power island support on J* devices
- Use better APM calls so user modification to power domains
don't cause the device to enter a bad state
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the ti-rpmsg-char library to 0.6.0 version that enables the
support for 6.1 kernel.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Rename the .wks to .wks.in so the EFI_PROVIDER variable is expanded
properly. We only ever set a soft recommendation for GRUB. If anyone
attempted to change that previously it was ignored (for more than just
the reason here, but that's out of my control).
Add a timeout for the bootloader menu. Currently setting it to 3
seconds.
Remove the read only flag on the rootfs. Not sure why that was there.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Now that are past the inital stages of our LTS migration, we can remove
the DEFAULT_PREFERENCE settings that prevented these recipes from being
the default.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
As part of the initial LTS migration, move to the latest commits for the
various repos.
- ti-linux-fw
- u-boot-ti-staging_2021.01
- u-boot-ti-staging_2023.04
- k3conf_git
- linux-ti-staging-rt_5.10
- linux-ti-staging-rt_6.1
- linux-ti-staging_5.10
- linux-ti-staging_6.1
Going forward all updates will come from the CICD flow.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the src revision to enable the following features on Jacinto:
- Active power managment
- Power island control via firmware
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Stop looking for the rpmsg_rpc.h in the kernel. While we are doing the
LTS migration for kirkstone, this file is not going to be in the kernel
for a bit. This patch works in conjunction with a recipe change that
downloads the header and adds a -I to the CFLAGS to pick it up. This
will be removed once the 6.1 kernel has been updated.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
uboot will now use a merged defconfig build so keep the defconfig same
for hs here
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
u-boot 2023.04 merged def configs for HS and GP EVM into one.
This patch updates config for J721S2 HS EVM for both A72 and R5.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
u-boot 2023.04 merged def configs for HS and GP EVM into one.
This patch updates config for J7200 HS EVM for both A72 and R5.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
When creating the boot partition we copy all of the images for the
different board types (gp, hs-fs, hs-se), but one of those we consider
to be a default. That default is not copied with the longer name, but
rather with the tiboot3.bin name.
The issue comes when someone wants to boot with a different bin file.
They need to copy the approriate longer named .bin file to tiboot3.bin.
But then the original name of what tiboot3.bin is lost unless the use
backs it up.
This patch just additionally copies that longer named bin file so that
anyone who wants to look at the boot partiion and decide to boot for a
different board can know which file to copy to tiboot3.bin and does not
need to worry about making a backup.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Avoid inheriting ti-secdev class and adding unconditional dependency
on TI_SECURE_DEV_PKG and other variables, when meta-ti-bsp is in the
bblayers.conf stack, but not building for TI platforms. This solves
yocto-check-layer signature test for Yocto Project compliance.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Avoid inheriting ti-secdev class and adding unconditional dependency
on TI_SECURE_DEV_PKG and other variables, when meta-ti-bsp is in the
bblayers.conf stack, but not building for TI platforms. This solves
yocto-check-layer signature test for Yocto Project compliance.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There are some unobvious issues with adding PVR support to Mesa
via a bbappend:
1. We need to mark mesa package as machine-specific, due to
differences in builds between SGX, Rogue and software-rendering
2. We also need to then mark mesa package as providing safe
ABIs (EGL/GLES/GBM) in order for all generic dependent packages
to not be treated as machine-specific, allowing their re-use
across different machines of the same architecture
But doing the above alters the upstream mesa package and changes
its signatures even when not building for TI platforms, which is
a Yocto Project compliance violation.
In order to resolve this issue, convert Mesa bbappend, that adds
PVR support, into its own standalone alternative provider, called
mesa-pvr and allow selecting it with PREFERRED_PROVIDER settings.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Some of the settings for KERNEL_DEVICETREE_PREFIX were missed in the
first pass. Additionally, some new dts files that were not present in
upstream are now there and can be updated in KERNEL_DEVICETREE.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
OE-Core recently added non-flat directory structure for device trees
and overlays packaging:
https://git.openembedded.org/openembedded-core/commit/?id=04ab57d20009d85eb566e83ae6fe1dcea4db7300
But it only packages 2 levels - top KERNEL_DTBDEST and one level down
for vendored device trees. But linux-bb.org installs own overlays in
"overlays" subdir of the "ti" vendor directory, making it the third
level. Add those overlays into the package as weel.
Cc: Randolph Sapp <rs@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Andrew Davis
Hari Nagalla
Ryan Eatmon
Randolph Sapp
Kevin Hao
Denys Dmytriyenko
Praneeth Bajjuri
Jai Luthra
LCPD Automation Script
Manorit Chawdhry
Udit Kumar
Khem Raj