Updated the linux version for 08.02.00.005
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.02.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.02.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.02.00.004
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
ti-sgx-ddk-um's do_install creates a symlink libGLESv2.so.1 to
libGLESv2.so. As this symlink will be installed to ti-sgx-ddk-um, but
its target libGLESv2.so is in ti-sgx-ddk-um-dev, the automated
dependency analysis will add ti-sgx-ddk-um-dev to ti-sgx-ddk-um's
RDEPENDS. This will pull in a large number of other -dev packages
through RDEPENDS and RRECOMMENDS in turn.
Avoid this by having libGLESv2.so.1 point to libGLESv2.so.2 instead of
libGLESv2.so, so the symlink's target is in ti-sgx-ddk-um as well.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
To allow a consistent experience across current devices, enable wic.bmap file
generation for AM3/4/5 images.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
bitbake git fetcher warns about protocol and fall back branches
therefore be explicit about these parameters in source uri
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The AM65xx is the only member of the K3 family with an SGX GPU.
Be specific here to avoid confusion.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There are now three SoCs in the J7 family, but only the j721e variant
is currently supported. Be specific here.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This allows us to be more specific around what SoCs we support and
lets us add features based on the SoC family not just at the EVM or
whole J7family level.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In many places we use "j7" the family when we should be using a
specific SoC or EVM and vice-versa. For instance when including
graphics drivers we add for all "j7" family, but what we really
want is only for some specific j7 SoC.
First step in untangling this is to make it clear that there is
no SoC called j7. There is a SoC called j721e with a j721e-evm.
Fix up this naming here.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add README for the newly added meta-ti-extras layer and update the maintainer.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.02.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.02.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.02.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.02.00.003
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.02.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.02.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.02.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.02.00.002
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The VIP camera capture driver recently ported to ti-linux-5.10.y adds
a DT overlay for the OV10635 camera sensor. Add this to
KERNEL_DEVICTREE so it's added to the artifacts.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We need to control both the source name of the firmware and
the target name, so split the current variable into two and
update the install command.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the ti-linux-fw version for 08.02.00.001
- Changed CORESDK_RTOS_VERSION version to 08.02.00.04
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the u-boot version for 08.02.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux rt version for 08.02.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Updated the linux version for 08.02.00.001
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the ti-rpmsg-char library to 0.4.0 version that enables the
support for j721s2 SoC family remote processors.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are now using binman to generate the images for
K3 AM64 in u-boot.
tools/binman/binman needs python3-setuptools so add it to
DEPENDS.
Reported-by: Praneeth Bajjuri <praneeth@ti.com>
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The original recipe listed the compatible platforms to
all of j7, but at this time it is limited to j721s2-evm.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit d29025f7e8.
* associated fix in k3-image-gen is picked up now.
commit 892c86501ff7 ("Makefile: Skip signing of binaries for HS combined boot")
hence its no longer needed to carry the same fix from meta-ti here.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update ti-linux-firmware and k3-image-gen to
pick latest TIFS and DM v2022.01
This version also adds support to j721s2
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the name of the firmware for j721s2 as the file
was renamed. Also, fix a typo in the variable name.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets fix the missing switch firmware binary to point to ping binary
instead. If we attempt to start alternate CPU, we get a very beserk
system.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add firmware recipe to add the Wave521cl firmware pieces in for j7
platform.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Dont forget the alternate-target as well.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets keep ethernet switch firmware disabled till we can actually
integrate it.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets enumerate the C7x target instead of defaulting as a since C7x.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Actual systems may choose to use a different console from the default
Allow the machine configurations to describe the same. Since the
option provided is custom to TI K3, make this a k3 product override
capability.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Actual systems may choose to use a different console from the default
Allow the machine configurations to describe the same.
Since the option provided is custom to TI K3, make this a k3 product
override capability.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Firmware images should always be installed under /lib and hence should use
nonarch_base_libdir, as regular base_libdir is configuration-specific and
doesn't always resolve to /lib.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
base_libdir is not configuration safe while firmware binaries
should always be deployed to /lib. In configurations where
base_libdir is not /lib the firmware gets deployed to wrong
paths.
This is fixed by using the nonarch_base_libdir which is
configuration agnostic.
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The AM335x SoC has a built-in 16bit/24bit RGB LCD controller, and
the BeagleBone Black uses an external chip to convert this to HDMI.
But the SoC does not have a video output port per-se, thus the "screen"
machine feature does not belong to its configuration but rather to
the machine configurations.
Move the feature (and the MACHINE_GUI_CLASS definition) out of
ti33x.inc into am335x-evm.conf and beaglebone.conf respectively.
At the same time, drop the irrelevant comments regarding the external
screen, since MACHINE_GUI_CLASS is unlikely used and the BeagleBone
Black has a micro HDMI port, not a DVI port.
Signed-off-by: Vivien Didelot <vdidelot@pbsc.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Require kernel image and device tree as machine-specific packages with
MACHINE_ESSENTIAL_EXTRA_RDEPENDS instead of appending IMAGE_INSTALL.
This binds the packages to the packagegroup-core-boot package group,
allowing one to skip their installation, e.g. for container trees.
This patch reflects commit d4cbe0e43393 [1] from meta-yocto-bsp
("beaglebone-yocto: move kernel and dtb to packagegroup-core-boot").
[1] https://git.yoctoproject.org/meta-yocto/commit/?id=d4cbe0e43393ec70e98caf006372b5311597d377
Signed-off-by: Vivien Didelot <vdidelot@pbsc.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Ryan Eatmon
Matthias Schiffer
Jonathan Humphreys
Khem Raj
Alessio Igor Bogani
Andrew Davis
Denys Dmytriyenko
Kevin Hilman
Hari Nagalla
Roger Quadros
Praneeth Bajjuri
Nishanth Menon
Awais Belal
Vivien Didelot