Major Updates since 1.7.0.120:
- Added WPA1 support
- Addressed many stability issues in WiFi and BLE
- Enabled thermal protection for operation up to 105C
SHA1 checksum:
c364c4d89802bcac769ee6eebc08ae1c4ef5a205 cc33xx_2nd_loader.bin
b39bfac65e0300e81dfcfee7301e07b4289df448 cc33xx-conf.bin
821fa40f608e350baa9e4cdfea6719bf469c5220 cc33xx_fw.bin
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This recipe builds and runs fine on both DRA7x and AM57x machines.
The COMPATIBLE_MACHINE is set to just DRA7x, but this was okay as AM57x
machines also set themselves as DRA7x family devices. The issue is then
we cannot then differentiate between packages that are actually DRA7x-
only and those that just use that family to mean both machine types. To
fix this when we mean both are allowed use "omap-a15" as done here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This recipe builds and runs fine on both DRA7x and AM57x machines.
The COMPATIBLE_MACHINE is set to just DRA7x, but this was okay as AM57x
machines also set themselves as DRA7x family devices. The issue is then
we cannot then differentiate between packages that are actually DRA7x-
only and those that just use that family to mean both machine types. To
fix this when we mean both are allowed use "omap-a15" as done here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This recipe is already only compatible with the DRA7xx machine, so
no need to set PLATFORM based on the only possibility. This then
allows us to directly set the compile flags for the same. And now
that the package does not change based on the machine, remove the
PACKAGE_ARCH line.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This recipe is already only compatible with the DRA7xx machine, so
no need to set PLATFORM based on the only possibility. This then
allows us to directly set the compile flags for the same. And now
that the package does not change based on the machine, remove the
PACKAGE_ARCH line.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This was only ever used as part of the DSP firmware for OpenCL dispatch.
That is all gone now, so remove this leftover dependency.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The messageq IPC firmware example for AM57xx SoCs is available in
ti-linux-firmware repository. Add a recipe to package the prebuilt
messageq firmware into the rootfs.
Additionally, make sure the firmware for IPU1 rproc is copied into boot
partition by updating the dependency in omap-a15 machine conf to the
above recipe. This is needed for Early Boot use cases and gets rid of
dependency on meta-ti-extras layer.
There is no need to deploy the vayu IPC firmware anymore. Remove
the deploy task from ti-ipc-rtos recipe.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add a recipe to build the Application Host (for A15 core) to demonstrate
IPC with remote processors through messageq firmware. Also package this
in the /usr/bin directory for testing IPC. This recipe only builds the
app_host, and the firmwares are available in ti-linux-firmware
repository.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
update to PSSP release v6.5.0. This release is compatible to linux
v6.12 and other fixes for RP message size.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Every recipe should have a SUMMARY and that can only be 72 characters at
most. This recipes had a DESCRIPTION and not SUMMARY.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Every recipe should have a SUMMARY and that can only be 72 characters at
most. Some of these recipes had DESCRIPTIONS and not SUMMARY, some were
missing the SUMMARY, and some had slightly too long values for the SUMMARY.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This is an old code base and hasn't been updated in a very long
time. It now fails to compile with gcc-15 (C23 standard). Force
compilation with GNU/C11 standard instead.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Since OE bitbake commit 24772dd2ae6c ("parse/ConfHandler: Add warning for
deprecated whitespace usage"), the current build generates the following
warning (as example):
| WARNING: ...meta-ti/meta-ti-bsp/recipes-ti/ipc/ti-ipc_git.bb:
| meta-ti/meta-ti-bsp/recipes-ti/ipc/ti-ipc_git.bb:2
| has a lack of whitespace around the assignment:
| 'HOMEPAGE="http://processors.wiki.ti.com/index.php/Category:IPC"'
Fix all the warnings.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Correct SRCREV for jailhouse which currently points to an unpublished
commit hash.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add am62lxx as compatible machine for ti-extras recipes and jailhouse
recipes. This is to to control the kernel and u-boot repos, branches.
So the am62lxx jailhouse build can be done by adding TI_EXTRAS=tie-jailhouse
in local.conf.
Update SRCREV and branch in ti-extras recipes for LTS migration.
Also update jailhouse recipe to build and package jailhouse, cell files,
device tree for inmate etc on am62lx image.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The ti-cgt-arm compiler is a custom TI compiler. It does not
currently support reproducible builds and is provided via a
binary blob download that we cannot patch in the recipe to
address the issue.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update SRCREV to pick up patch that fixes some compile errors:
../git/memplugin_linux.c: In function 'memplugin_alloc':
../git/memplugin_linux.c:69:9: error: implicit declaration of function 'dsp_dce_buf_lock' [-Wimplicit-function-declaration]
69 | dsp_dce_buf_lock(1, &(h->dma_buf_fd));
| ^~~~~~~~~~~~~~~~
../git/memplugin_linux.c:71:9: error: implicit declaration of function 'dce_buf_lock' [-Wimplicit-function-declaration]
71 | dce_buf_lock(1, &(h->dma_buf_fd));
| ^~~~~~~~~~~~
../git/memplugin_linux.c: In function 'memplugin_free':
../git/memplugin_linux.c:91:17: error: implicit declaration of function 'dsp_dce_buf_unlock' [-Wimplicit-function-declaration]
91 | dsp_dce_buf_unlock(1, &(h->dma_buf_fd));
| ^~~~~~~~~~~~~~~~~~
../git/memplugin_linux.c:93:17: error: implicit declaration of function 'dce_buf_unlock' [-Wimplicit-function-declaration]
93 | dce_buf_unlock(1, &(h->dma_buf_fd));
| ^~~~~~~~~~~~~~
../git/memplugin_linux.c:95:13: error: implicit declaration of function 'close'; did you mean 'pclose'? [-Wimplicit-function-declaration]
95 | close(h->dma_buf_fd);
| ^~~~~
| pclose
and
../git/libdce_linux.c: In function 'dce_deinit':
../git/libdce_linux.c:90:9: error: implicit declaration of function 'close'; did you mean 'pclose'? [-Wimplicit-function-declaration]
90 | close(OmapDrm_FD);
| ^~~~~
| pclose
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There were some errors related to ipk postinst. The issues were fixed
by going to the update-alternatives class instead of trying to create
the steps directly in the recipe.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This might have been useful for building development packages with
the pre-built binaries for deployment elsewhere, but there are
better ways to do this and these are no longer consumed. Remove
this packaging step.
Signed-off-by: Andrew Davis <afd@ti.com>
This might have been useful for building development packages with
the pre-built binaries for deployment elsewhere, but there are
better ways to do this and these are no longer consumed. Remove
this packaging step.
Signed-off-by: Andrew Davis <afd@ti.com>
Early boot of remote processors from SPL stage of bootloader requires
the remoteproc firmware to be present in the boot partition. Deploy this
rproc IPC firmware so that it can be copied to the boot partitions of
the wic images.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Add a SECURITY file with hints for security researchers and other
parties who might report potential security vulnerabilities.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
This IPC example is no longer supported nor recommended for new designs.
The documentation is no not available either (was on Processors Wiki).
Remove this example.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There was a change to the return value for a function pointer in the
kernel v6.11. This patch adapts the module to the kernel change.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Last user was dspdce-fw which is removed. Remove this now unused
support library.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This was an attempt to run the DCE server firmware on the DSP instead
of on the IPU M4 cores. Not widely used and not used at all anymore,
remove the firmware for this.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Remove openmp-rtos component as deprecated and not maintained.
This used to provide OpenMP DSP runtime components for legacy devices.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
omapzoom has been down since a long time. Point the repository to the
mirror in git.ti.com
Reported-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
A compile error has apperaed when building againt the v6.10 kernel.
git/debugss_module/debugss-mod/debugss_kmodule.c:1149:34: error: array type has incomplete element type 'struct of_device_id'
1149 | static const struct of_device_id dra7xx_debugss_of_match[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~
The easy fix is just to add an include for the header that defines the
missing struct.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The gdbc6x debugger might be able to be updated for the reproducible
build effort. While we continue to explore what is possible, we will
disable the check so that we can continue to maintain our code for
releases.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The ti-cgt6x compiler is a custom TI compiler for the TI C6000
Digital Signal Processor(DSP) platform. It does not currently
support reproducible builds and is provided via a binary blob
download that we cannot patch in the recipe to address the
issue.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The ti-cgt6x compiler is a custom TI compiler for the TI C6000
Digital Signal Processor(DSP) platform. It does not currently
support reproducible builds and is provided via a binary blob
download that we cannot patch in the recipe to address the
issue.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The ti-cgt6x compiler is a custom TI compiler for the TI C6000
Digital Signal Processor(DSP) platform. It does not currently
support reproducible builds and is provided via a binary blob
download that we cannot patch in the recipe to address the
issue.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Installer log contains absolute paths and is not really needed.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
A newly enabled check in master is causing errors with this package:
ERROR: QA Issue: Architecture did not match (ARM, expected x86-64)
Adding arch to the INSANE_SKIP variable disables that check for this
recipe.
Suggested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
- Update SRCREV for jailhouse which incorporates makefile changes for
scarthgap.
- To handle ${ARAGO_IMAGE_SUFFIX}, add * wherever JH_RAMFS_IMAGE is used in
do_install (install or copy) so to pick correct inmate image for RT build.
- Skip QA checks for usrmerge and buildpath. This is required to package
jailhouse in image.
- Update FILES:${PN}.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Download and install the cc33xx firmware and binaries
to be used with the cc33xx drivers.
FW Version: 1.7.0.120
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
cc33calibrator is a tool provided by TI to manually control the
radio frontend of the cc33xx device. This tool can also be used
for production line testing of the radio.
Documentation for this tool is provided within the following link:
https://www.ti.com/tool/CC33XX-SOFTWARE
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
cc33conf is a tool provided by TI to configure
cc33xx WLAN devices. It can be used to change
the RF parameters and other features of the target.
Documentation for this tool is provided within the following link:
https://www.ti.com/tool/CC33XX-SOFTWARE
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
MACHINE_KERNEL_PR is a remnant of the early OE days and hasn't been
needed for quite some time. Let's finally remove it completely.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This upgrade contains the following changes:
* updated hostapd path in ap_start.sh
* ap_stop.sh removes wlan1 interface
* hostapd.conf updated to work seamlessly with hostapd 2.10
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update SRCREV for jailhouse recipe which will add changes for Out of Box
demo and also a new application to test whether the linux inmate cell has
crashed or not.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This patch moves the jailhouse recipe general variables to a
ti-jailhouse.inc file along with fetch and compile task.
Jailhouse repo also contains some demo applications which can
be packaged alone in filesytem and does not require packaging
jailhouse module, firmware and tool.
So add a new recipe jailhouse-inmate which can be used to only
package those demos. The existing jailhouse recipe will contain
variables and other dependencies needed for do_install task for
jailhouse module, tools, demos etc. The do_install of jailhouse
inmate recipe will only package demo applications.
This new recipe(jailhouse-inmate) will be added to a new image
in meta-arago. The new image will be used for jailhouse second
linux instance or cell.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
