These are some fixes suggested by Jason Kridner to fix the PMIC
instabilities we've been seeing over USB power.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Cc: Jason Kridner <jdk@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Gerald has said his supply of 2GB SD cards for BeagleBone has
gone away, so we are back to 4GB cards. No more need for this
exeption:
Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Networking:
CONFIG_NETFILTER=* - were enabled as modules in beagle xM
Enabled options for ARP and IP tables as modules for the bone kernel.
CONFIG_NET_SCH= - networking schedulers, enabled as modules
IR:
Infrared and dongle support, enabled as modules.
Made RFSwitch subsystem as a module
USB:
Added support for usb-serial and miscellaneous devices as modules.
I also used the kernel .config we used for the -xM for comparison purposes.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
This change is required to get GPIO 1_6 working for bone test init purposes
These 2 lines were dropped from the original patch.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
This has 2 problems:
1) | Warning: partition 1 does not end at a cylinder boundary
|
| sfdisk: I don't like these partitions - nothing changed.
2) CCCCCCCCC on the beaglebone, the ROM code doesn't accept it after fixing 1) with --force
This reverts commit ed09701ebe.
Fixes:
* 100% CPU usage when no test is running
* Turn on USB host session before checking for usb-serial device
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Align partitions for SD card performance/wear optimization. For more
details, please see:
http://sakoman.com/OMAP/a-script-for-partitioningformatting-a-bootable-sdmicrosd-card.html
# Modifications to align partitioning by Steve Sakoman
# based on work by Arnd Bergmann
# Align partitions for SD card performance/wear optimization
# FAT partition size is 131072 sectors (64MB) less:
# MBR - 1 sector
# padding to align to the page size of the underlying flash - 127 sectors
# so we start the first partition at sector 128 and make it 131072 - 128 = 130944 sectors
# second partition starts at 131072 and continues to fill the card
Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Added:
- Output test status to USB serial port
- Made more verbose
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Enable the PL2303 usb-to-serial driver required for serial output
from the beaglebone tester.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Acked-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Updated to latest SRCREV and bump PR.
Added following patches being submitted to PSP currently:
* EEPROM patches required to get EEPROM working correctly on BBB without
breaking support for EVM.
* omap_mux_init_signal patch to safe guard against incorrectly setting up pinmux.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
This patch fixes the case where the EEPROM is programmed but we still use the
fall back case to detect the bone board. Now that EEPROMs are programmed, we should
correctly detect the bone board instead of relying on fall back to bone mode.
PR bumped
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Koen Kooi
Joel A Fernandes
Jason Kridner
Andreas Müller
Denys Dmytriyenko
Khem Raj