* Remove the RDEPENDS for the am33x-cm3-initscript package since
the latest kernel source use the hotplug functionality to load
the firmware.
* Updated the SRCREV to the latest kernel sources which include
the hotplug fix.
* Bump the MACHINE_KERNEL_PR for the am335x and am437x devices
which are affected.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The VPE firmware should only be added for the dra7xx-evm
machine type since that is the device with the VPE IP.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Kernel source migration from git.ti.com to omapzoom.org. The development
tree is shared between the Linux and Android teams.This enables a common
kernel development platform for both the teams for better alignment.
* Add support for VIP and VPE
* Add wilink/wlan support
* Enable rpmsg/remoteproc driver for multimedia
Signed-off-by: Mrinmayee Hingolikar <mrinmayee@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Use SOC family value for am437x instead of machine name for DTB files.
* This mimics the current approach taken for am335x.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The PM for TI parts was merged in
* Platform and connectivity got updated
* Since we now have separate DTB for BeagleBone Black, install it too
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Set up the run-time dependency on the package with devicetree files to be
installed in /boot directory of the rootfs. The new U-boot prefers to load
them from /boot directory of the rootfs instead of the separate boot partition.
Also, there are some specific requirements for naming DTB files in /boot
directory (like no extra prefixes), but that should be addressed separately.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Essentially, machine_kernel_pr.bbclass does this one line assignment, but
introduces a new unnecessary dependency on meta-openembedded/meta-oe layer.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Many machines are supported by newer 3.x kernel recipes
* Few old platforms are still supported by 2.6.37 recipes
* Some platforms are not supported in meta-ti, like Crane, Touchbook, Overo
* For any platform still requiring this outdated kernel, the recipe can be picked
up from Danny or Denzil
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Hawkboard platform is not supported in meta-ti.
* Since there no new revs of the kernel, the old recipe can be picked up from
Danny or Denzil.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Beagleboard is supported by newer 3.2 and 3.3.7 kernel recipes.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
This adds a new mandatory dependency on meta-openembedded layer. While we are
still trying to resolve an existing optional dependency, not bring a new one.
The MACHINE_KERNEL_PR requirement will need to be handled differently.
This reverts commit 1450f19380.
* MACHINE_KERNEL_PR was originally defined in the kernel class located in
meta-oe which overrode the version of the class in oe-core.
* Some time ago kernel.bbclass was removed from meta-oe and a separate class
machine_kernel_pr was created to add support for MACHINE_KERNEL_PR.
* Since this variable is used significantly in both meta-ti and meta-arago make
sure all the kernel recipes directly or indirectly inherit this new class.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
We rely on kernel-base having run-time dependency on kernel-image, which
normally would pull uImage/zImage into /boot directory of rootfs.
Thanks to Chase for pointing me in the right direction by noticing that our
addition of cm3 firmware breaks that dependency for ti33x.
The reason for that is RDEPENDS is being conditionally assigned with ?=
in kernel.bbclass and using += with machine-override clears that value due
to the order of processing. Hence _append should be used instead of += to
process it after the machine-override takes place.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
* DTB for OMAP5 sEVM was removed upstream, drop it from the recipe
* Don't mask the default preference to be picked up normally by supported machines
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Some kernel versions (and corresponding u-boot) may still need to set uImage,
as preferred image type, since the machine config changes preference to zImage
for newer kernels - keep that for ti33x and omap-a15 stuck on 3.2 and 3.8.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
* Add patch that enables Smart Reflex on new PG 2.x boards.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Patches have been added to fix some USB with DMA.
* Enable support for this by default by removing the patch that disabled it.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Machine compatible with only omap-a15 devices.
* The TI Staging tree will not be used to maintain K3.8. Instead,
this new tree is set up as a production tree. Pending features
for 3.8 will be implemented on this tree.
- Backported features from linux mainline
- Backported bug-fixes from linux mainline and linux-stable.
- Features implemented by the GLSDK team which maybe product
specific.
This is the tree on which GLSDK kernel releases will be made.
* This recipe is based off the Core SDK 2013.04.02 released kernel
recipe - recipes-kernel/linux/linux-ti-staging_3.8.bb
Signed-off-by: Siddharth Heroor <heroor@ti.com>
cc: Mrinmayee Hingolikar <mrinmayee@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the DTB entries for the dra7xx-evm machine type
* Update to the latest git sources which have dra7xx-evm support.
* Update the PV to match the latest source version
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* 3.8+ kernels use an init script to load the cm3 firmware.
* 3.2 kernel require the cm3 firmware during compile time therefore no init
script is needed.
* Separate the init script from the main package and place it in its own
package.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Sam Nelson
Denys Dmytriyenko
Chase Maupin
Mrinmayee Hingolikar
Franklin S. Cooper Jr
Siddharth Heroor