mirror of
https://git.yoctoproject.org/meta-ti
synced 2026-07-17 06:48:07 +00:00
18ff66cb77
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
460 lines
16 KiB
Diff
460 lines
16 KiB
Diff
From ab34edbd04746da7916e720ae1f07a981ab5a298 Mon Sep 17 00:00:00 2001
|
|
From: Benoit Cousson <b-cousson@ti.com>
|
|
Date: Sun, 10 Jul 2011 05:56:31 -0600
|
|
Subject: [PATCH 081/149] OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros
|
|
|
|
The RSTCTRL register was accessed using an absolute address.
|
|
The usage of hardcoded macros to calculate virtual address from physical
|
|
one should be avoided as much as possible.
|
|
The usage of an offset will allow future improvement like migration from
|
|
the current architecture code toward a module driver.
|
|
|
|
Update prm_xxx accessors, move definition to the proper header file and
|
|
update copyrights.
|
|
Change the s16 register offset parameter to u16.
|
|
|
|
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
|
|
Cc: Paul Walmsley <paul@pwsan.com>
|
|
Cc: Rajendra Nayak <rnayak@ti.com>
|
|
[paul@pwsan.com: use '_prminst_' in function names that are part of the
|
|
prminst44xx.c file]
|
|
Signed-off-by: Paul Walmsley <paul@pwsan.com>
|
|
---
|
|
arch/arm/mach-omap2/omap_hwmod.c | 19 ++++--
|
|
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 16 ++--
|
|
arch/arm/mach-omap2/prm44xx.c | 93 +-------------------------
|
|
arch/arm/mach-omap2/prm44xx.h | 4 -
|
|
arch/arm/mach-omap2/prminst44xx.c | 93 +++++++++++++++++++++++++-
|
|
arch/arm/mach-omap2/prminst44xx.h | 10 +++-
|
|
arch/arm/plat-omap/include/plat/omap_hwmod.h | 3 +-
|
|
7 files changed, 125 insertions(+), 113 deletions(-)
|
|
|
|
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
|
|
index d21f49b..a0f7d31 100644
|
|
--- a/arch/arm/mach-omap2/omap_hwmod.c
|
|
+++ b/arch/arm/mach-omap2/omap_hwmod.c
|
|
@@ -149,6 +149,7 @@
|
|
#include "cminst44xx.h"
|
|
#include "prm2xxx_3xxx.h"
|
|
#include "prm44xx.h"
|
|
+#include "prminst44xx.h"
|
|
#include "mux.h"
|
|
|
|
/* Maximum microseconds to wait for OMAP module to softreset */
|
|
@@ -1187,8 +1188,10 @@ static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
|
|
return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
|
|
ohri.rst_shift);
|
|
else if (cpu_is_omap44xx())
|
|
- return omap4_prm_assert_hardreset(oh->prcm.omap4.rstctrl_reg,
|
|
- ohri.rst_shift);
|
|
+ return omap4_prminst_assert_hardreset(ohri.rst_shift,
|
|
+ oh->clkdm->pwrdm.ptr->prcm_partition,
|
|
+ oh->clkdm->pwrdm.ptr->prcm_offs,
|
|
+ oh->prcm.omap4.rstctrl_offs);
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
@@ -1223,8 +1226,10 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
|
|
if (ohri.st_shift)
|
|
pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
|
|
oh->name, name);
|
|
- ret = omap4_prm_deassert_hardreset(oh->prcm.omap4.rstctrl_reg,
|
|
- ohri.rst_shift);
|
|
+ ret = omap4_prminst_deassert_hardreset(ohri.rst_shift,
|
|
+ oh->clkdm->pwrdm.ptr->prcm_partition,
|
|
+ oh->clkdm->pwrdm.ptr->prcm_offs,
|
|
+ oh->prcm.omap4.rstctrl_offs);
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
@@ -1259,8 +1264,10 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name)
|
|
return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
|
|
ohri.st_shift);
|
|
} else if (cpu_is_omap44xx()) {
|
|
- return omap4_prm_is_hardreset_asserted(oh->prcm.omap4.rstctrl_reg,
|
|
- ohri.rst_shift);
|
|
+ return omap4_prminst_is_hardreset_asserted(ohri.rst_shift,
|
|
+ oh->clkdm->pwrdm.ptr->prcm_partition,
|
|
+ oh->clkdm->pwrdm.ptr->prcm_offs,
|
|
+ oh->prcm.omap4.rstctrl_offs);
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
|
|
index 00d7130..6a190f5 100644
|
|
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
|
|
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
|
|
@@ -1144,7 +1144,7 @@ static struct omap_hwmod omap44xx_dsp_c0_hwmod = {
|
|
.rst_lines_cnt = ARRAY_SIZE(omap44xx_dsp_c0_resets),
|
|
.prcm = {
|
|
.omap4 = {
|
|
- .rstctrl_reg = OMAP4430_RM_TESLA_RSTCTRL,
|
|
+ .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
|
|
},
|
|
},
|
|
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
|
|
@@ -1161,7 +1161,7 @@ static struct omap_hwmod omap44xx_dsp_hwmod = {
|
|
.prcm = {
|
|
.omap4 = {
|
|
.clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET,
|
|
- .rstctrl_reg = OMAP4430_RM_TESLA_RSTCTRL,
|
|
+ .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
|
|
},
|
|
},
|
|
.slaves = omap44xx_dsp_slaves,
|
|
@@ -2526,7 +2526,7 @@ static struct omap_hwmod omap44xx_ipu_c0_hwmod = {
|
|
.rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c0_resets),
|
|
.prcm = {
|
|
.omap4 = {
|
|
- .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL,
|
|
+ .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
|
|
},
|
|
},
|
|
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
|
|
@@ -2542,7 +2542,7 @@ static struct omap_hwmod omap44xx_ipu_c1_hwmod = {
|
|
.rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c1_resets),
|
|
.prcm = {
|
|
.omap4 = {
|
|
- .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL,
|
|
+ .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
|
|
},
|
|
},
|
|
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
|
|
@@ -2559,7 +2559,7 @@ static struct omap_hwmod omap44xx_ipu_hwmod = {
|
|
.prcm = {
|
|
.omap4 = {
|
|
.clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET,
|
|
- .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL,
|
|
+ .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
|
|
},
|
|
},
|
|
.slaves = omap44xx_ipu_slaves,
|
|
@@ -2726,7 +2726,7 @@ static struct omap_hwmod omap44xx_iva_seq0_hwmod = {
|
|
.rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_seq0_resets),
|
|
.prcm = {
|
|
.omap4 = {
|
|
- .rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL,
|
|
+ .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
|
|
},
|
|
},
|
|
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
|
|
@@ -2742,7 +2742,7 @@ static struct omap_hwmod omap44xx_iva_seq1_hwmod = {
|
|
.rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_seq1_resets),
|
|
.prcm = {
|
|
.omap4 = {
|
|
- .rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL,
|
|
+ .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
|
|
},
|
|
},
|
|
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
|
|
@@ -2759,7 +2759,7 @@ static struct omap_hwmod omap44xx_iva_hwmod = {
|
|
.prcm = {
|
|
.omap4 = {
|
|
.clkctrl_offs = OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET,
|
|
- .rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL,
|
|
+ .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
|
|
},
|
|
},
|
|
.slaves = omap44xx_iva_slaves,
|
|
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
|
|
index a2a04bf..faec860 100644
|
|
--- a/arch/arm/mach-omap2/prm44xx.c
|
|
+++ b/arch/arm/mach-omap2/prm44xx.c
|
|
@@ -1,7 +1,7 @@
|
|
/*
|
|
* OMAP4 PRM module functions
|
|
*
|
|
- * Copyright (C) 2010 Texas Instruments, Inc.
|
|
+ * Copyright (C) 2011 Texas Instruments, Inc.
|
|
* Copyright (C) 2010 Nokia Corporation
|
|
* Benoît Cousson
|
|
* Paul Walmsley
|
|
@@ -24,12 +24,6 @@
|
|
#include "prm44xx.h"
|
|
#include "prm-regbits-44xx.h"
|
|
|
|
-/*
|
|
- * Address offset (in bytes) between the reset control and the reset
|
|
- * status registers: 4 bytes on OMAP4
|
|
- */
|
|
-#define OMAP4_RST_CTRL_ST_OFFSET 4
|
|
-
|
|
/* PRM low-level functions */
|
|
|
|
/* Read a register in a CM/PRM instance in the PRM module */
|
|
@@ -94,91 +88,6 @@ u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 reg)
|
|
return omap4_prm_rmw_inst_reg_bits(bits, 0x0, inst, reg);
|
|
}
|
|
|
|
-/**
|
|
- * omap4_prm_is_hardreset_asserted - read the HW reset line state of
|
|
- * submodules contained in the hwmod module
|
|
- * @rstctrl_reg: RM_RSTCTRL register address for this module
|
|
- * @shift: register bit shift corresponding to the reset line to check
|
|
- *
|
|
- * Returns 1 if the (sub)module hardreset line is currently asserted,
|
|
- * 0 if the (sub)module hardreset line is not currently asserted, or
|
|
- * -EINVAL upon parameter error.
|
|
- */
|
|
-int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift)
|
|
-{
|
|
- if (!cpu_is_omap44xx() || !rstctrl_reg)
|
|
- return -EINVAL;
|
|
-
|
|
- return omap4_prm_read_bits_shift(rstctrl_reg, (1 << shift));
|
|
-}
|
|
-
|
|
-/**
|
|
- * omap4_prm_assert_hardreset - assert the HW reset line of a submodule
|
|
- * @rstctrl_reg: RM_RSTCTRL register address for this module
|
|
- * @shift: register bit shift corresponding to the reset line to assert
|
|
- *
|
|
- * Some IPs like dsp, ipu or iva contain processors that require an HW
|
|
- * reset line to be asserted / deasserted in order to fully enable the
|
|
- * IP. These modules may have multiple hard-reset lines that reset
|
|
- * different 'submodules' inside the IP block. This function will
|
|
- * place the submodule into reset. Returns 0 upon success or -EINVAL
|
|
- * upon an argument error.
|
|
- */
|
|
-int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift)
|
|
-{
|
|
- u32 mask;
|
|
-
|
|
- if (!cpu_is_omap44xx() || !rstctrl_reg)
|
|
- return -EINVAL;
|
|
-
|
|
- mask = 1 << shift;
|
|
- omap4_prm_rmw_reg_bits(mask, mask, rstctrl_reg);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-/**
|
|
- * omap4_prm_deassert_hardreset - deassert a submodule hardreset line and wait
|
|
- * @rstctrl_reg: RM_RSTCTRL register address for this module
|
|
- * @shift: register bit shift corresponding to the reset line to deassert
|
|
- *
|
|
- * Some IPs like dsp, ipu or iva contain processors that require an HW
|
|
- * reset line to be asserted / deasserted in order to fully enable the
|
|
- * IP. These modules may have multiple hard-reset lines that reset
|
|
- * different 'submodules' inside the IP block. This function will
|
|
- * take the submodule out of reset and wait until the PRCM indicates
|
|
- * that the reset has completed before returning. Returns 0 upon success or
|
|
- * -EINVAL upon an argument error, -EEXIST if the submodule was already out
|
|
- * of reset, or -EBUSY if the submodule did not exit reset promptly.
|
|
- */
|
|
-int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift)
|
|
-{
|
|
- u32 mask;
|
|
- void __iomem *rstst_reg;
|
|
- int c;
|
|
-
|
|
- if (!cpu_is_omap44xx() || !rstctrl_reg)
|
|
- return -EINVAL;
|
|
-
|
|
- rstst_reg = rstctrl_reg + OMAP4_RST_CTRL_ST_OFFSET;
|
|
-
|
|
- mask = 1 << shift;
|
|
-
|
|
- /* Check the current status to avoid de-asserting the line twice */
|
|
- if (omap4_prm_read_bits_shift(rstctrl_reg, mask) == 0)
|
|
- return -EEXIST;
|
|
-
|
|
- /* Clear the reset status by writing 1 to the status bit */
|
|
- omap4_prm_rmw_reg_bits(0xffffffff, mask, rstst_reg);
|
|
- /* de-assert the reset control line */
|
|
- omap4_prm_rmw_reg_bits(mask, 0, rstctrl_reg);
|
|
- /* wait the status to be set */
|
|
- omap_test_timeout(omap4_prm_read_bits_shift(rstst_reg, mask),
|
|
- MAX_MODULE_HARDRESET_WAIT, c);
|
|
-
|
|
- return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
|
|
-}
|
|
-
|
|
void omap4_prm_global_warm_sw_reset(void)
|
|
{
|
|
u32 v;
|
|
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
|
|
index 6e53120..3732e02 100644
|
|
--- a/arch/arm/mach-omap2/prm44xx.h
|
|
+++ b/arch/arm/mach-omap2/prm44xx.h
|
|
@@ -755,10 +755,6 @@ extern u32 omap4_prm_set_inst_reg_bits(u32 bits, s16 inst, s16 idx);
|
|
extern u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 idx);
|
|
extern u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
|
|
|
|
-extern int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift);
|
|
-extern int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift);
|
|
-extern int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift);
|
|
-
|
|
extern void omap4_prm_global_warm_sw_reset(void);
|
|
|
|
# endif
|
|
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
|
|
index a303242..35e02aa 100644
|
|
--- a/arch/arm/mach-omap2/prminst44xx.c
|
|
+++ b/arch/arm/mach-omap2/prminst44xx.c
|
|
@@ -2,6 +2,7 @@
|
|
* OMAP4 PRM instance functions
|
|
*
|
|
* Copyright (C) 2009 Nokia Corporation
|
|
+ * Copyright (C) 2011 Texas Instruments, Inc.
|
|
* Paul Walmsley
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
@@ -53,7 +54,7 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
|
|
|
|
/* Read-modify-write a register in PRM. Caller must lock */
|
|
u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
|
|
- s16 idx)
|
|
+ u16 idx)
|
|
{
|
|
u32 v;
|
|
|
|
@@ -64,3 +65,93 @@ u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
|
|
|
|
return v;
|
|
}
|
|
+
|
|
+/*
|
|
+ * Address offset (in bytes) between the reset control and the reset
|
|
+ * status registers: 4 bytes on OMAP4
|
|
+ */
|
|
+#define OMAP4_RST_CTRL_ST_OFFSET 4
|
|
+
|
|
+/**
|
|
+ * omap4_prminst_is_hardreset_asserted - read the HW reset line state of
|
|
+ * submodules contained in the hwmod module
|
|
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
|
|
+ * @shift: register bit shift corresponding to the reset line to check
|
|
+ *
|
|
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
|
|
+ * 0 if the (sub)module hardreset line is not currently asserted, or
|
|
+ * -EINVAL upon parameter error.
|
|
+ */
|
|
+int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
|
|
+ u16 rstctrl_offs)
|
|
+{
|
|
+ u32 v;
|
|
+
|
|
+ v = omap4_prminst_read_inst_reg(part, inst, rstctrl_offs);
|
|
+ v &= 1 << shift;
|
|
+ v >>= shift;
|
|
+
|
|
+ return v;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * omap4_prminst_assert_hardreset - assert the HW reset line of a submodule
|
|
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
|
|
+ * @shift: register bit shift corresponding to the reset line to assert
|
|
+ *
|
|
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
|
|
+ * reset line to be asserted / deasserted in order to fully enable the
|
|
+ * IP. These modules may have multiple hard-reset lines that reset
|
|
+ * different 'submodules' inside the IP block. This function will
|
|
+ * place the submodule into reset. Returns 0 upon success or -EINVAL
|
|
+ * upon an argument error.
|
|
+ */
|
|
+int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
|
|
+ u16 rstctrl_offs)
|
|
+{
|
|
+ u32 mask = 1 << shift;
|
|
+
|
|
+ omap4_prminst_rmw_inst_reg_bits(mask, mask, part, inst, rstctrl_offs);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
|
|
+ * wait
|
|
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
|
|
+ * @shift: register bit shift corresponding to the reset line to deassert
|
|
+ *
|
|
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
|
|
+ * reset line to be asserted / deasserted in order to fully enable the
|
|
+ * IP. These modules may have multiple hard-reset lines that reset
|
|
+ * different 'submodules' inside the IP block. This function will
|
|
+ * take the submodule out of reset and wait until the PRCM indicates
|
|
+ * that the reset has completed before returning. Returns 0 upon success or
|
|
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
|
|
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
|
|
+ */
|
|
+int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
|
|
+ u16 rstctrl_offs)
|
|
+{
|
|
+ int c;
|
|
+ u32 mask = 1 << shift;
|
|
+ u16 rstst_offs = rstctrl_offs + OMAP4_RST_CTRL_ST_OFFSET;
|
|
+
|
|
+ /* Check the current status to avoid de-asserting the line twice */
|
|
+ if (omap4_prminst_is_hardreset_asserted(shift, part, inst,
|
|
+ rstctrl_offs) == 0)
|
|
+ return -EEXIST;
|
|
+
|
|
+ /* Clear the reset status by writing 1 to the status bit */
|
|
+ omap4_prminst_rmw_inst_reg_bits(0xffffffff, mask, part, inst,
|
|
+ rstst_offs);
|
|
+ /* de-assert the reset control line */
|
|
+ omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs);
|
|
+ /* wait the status to be set */
|
|
+ omap_test_timeout(omap4_prminst_is_hardreset_asserted(shift, part, inst,
|
|
+ rstst_offs),
|
|
+ MAX_MODULE_HARDRESET_WAIT, c);
|
|
+
|
|
+ return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
|
|
+}
|
|
diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h
|
|
index 02dd66d..c14ae29 100644
|
|
--- a/arch/arm/mach-omap2/prminst44xx.h
|
|
+++ b/arch/arm/mach-omap2/prminst44xx.h
|
|
@@ -2,6 +2,7 @@
|
|
* OMAP4 Power/Reset Management (PRM) function prototypes
|
|
*
|
|
* Copyright (C) 2010 Nokia Corporation
|
|
+ * Copyright (C) 2011 Texas Instruments, Inc.
|
|
* Paul Walmsley
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
@@ -18,8 +19,15 @@
|
|
extern u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx);
|
|
extern void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
|
|
extern u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
|
|
- s16 inst, s16 idx);
|
|
+ s16 inst, u16 idx);
|
|
|
|
extern void omap4_prm_global_warm_sw_reset(void);
|
|
|
|
+extern int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
|
|
+ u16 rstctrl_offs);
|
|
+extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
|
|
+ u16 rstctrl_offs);
|
|
+extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
|
|
+ u16 rstctrl_offs);
|
|
+
|
|
#endif
|
|
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
|
|
index fc54355..9ef4424 100644
|
|
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
|
|
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
|
|
@@ -2,6 +2,7 @@
|
|
* omap_hwmod macros, structures
|
|
*
|
|
* Copyright (C) 2009-2011 Nokia Corporation
|
|
+ * Copyright (C) 2011 Texas Instruments, Inc.
|
|
* Paul Walmsley
|
|
*
|
|
* Created in collaboration with (alphabetical order): Benoît Cousson,
|
|
@@ -361,7 +362,7 @@ struct omap_hwmod_omap2_prcm {
|
|
*/
|
|
struct omap_hwmod_omap4_prcm {
|
|
u16 clkctrl_offs;
|
|
- void __iomem *rstctrl_reg;
|
|
+ u16 rstctrl_offs;
|
|
u8 submodule_wkdep_bit;
|
|
};
|
|
|
|
--
|
|
1.7.2.5
|
|
|