The 5.0.2 poky release (Yocto Project 1.0.2) required that the
manual history tables be updated.
(From yocto-docs rev: 784e000b9b381e63b453d2b461876611a047ba72)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added an entry to represent the Yocto Project 1.0.1 Release into
the manual history table for all of the manuals except the Yocto
Project Quick Start, which does not have a table.
(From yocto-docs rev: 5260548a799b4d11942ee0539903f4ea85569894)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes fix the following issues:
1. Multiple Makefiles. There really is no need for this.
2. Unable to maintain more than one version of the docs on the webserver.
This is a quick fix to enable the above.
In order to build the documentation, at the top level, issue a:
make all DOC=<doc directory name>
make all DOC=kernel-manual
Also, some changes need to occur on the webserver to fully
incorporate these fixes.
http://www.yoctoproject.org/documentation/
The docs are now published to:
http://www.yoctoproject.org/docs/<Release MM.mm>/<doc name>
The main page should be changed to point not only to the current doc release,
but also to the prior releases. This will enable us to maintain prior release
documentation without stomping over it when we publish new docs. Also, we'll
need to repoint the yocto-quick-start link to yocto-project-qs. Or rename
documentation/yocto-project-qs/* to support the website naming.
(From yocto-docs rev: b5cb0801691dbedfa9d3733a6b62450c8a674fa0)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This figure is not used in the manual. I removed it.
(From yocto-docs rev: 44cab823ee4b5b1d298d2b99eea847b62a2fbe07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The web server directory structure for the post 1.0 releases was changed.
Also, the creation of a new 1.0 area in the web structure was retroactively
created. this broke the five make files for publishing documents to the web.
I fixed all five files so they now push to the 1.0 area only. The fix included
hard-coding the 1.0 directory structure. I also set them up to be a little more
generic.
(From yocto-docs rev: d2cd8f1165b0cc995fc322a7d836de0902da7614)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the publish statement so that the HTML and PDF files will
be published to the Yocto Project website.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Substituted 'pokylinux.org' with 'yoctoproject.org' in an URL
to locate the OProfile viewer and server.
(From OE-Core rev: 6e2553b07be5f06a68f0967775111d7598d9404f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a stray "0.9" in an URL for the Yocto source downloads.
I changed it to 1.0.
(From OE-Core rev: 82890a85c0422aa6b081497be394aa756da567b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note in the "Installing the ADT" section (2.1) saying that
if you need to build the ADT tarball you can use
'bitbake adt-installer'. I also changed the location of the
toolchain from '...yocto-0.9' to '...yocto-1.0'. Finally,
I changed the host sub-directory in the toolchain directory
from 'i586' to i686'.
(From OE-Core rev: 18124c5065fc570e672d068e915e0f476d20379c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the revision history box for the manual to state the release
and the release date.
(From OE-Core rev: 15f5307f78899a10358ef426cadf5bc792d11d88)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jessica flip-flopped on the need for the Autotools plug-in that was
removed from the manual. I have re-inserted the instructions for adding
this plug-in in as part of the Eclipse set up.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section 4.1.3.4 discusses custom options for when you want to run
a QEMU image. Jessica felt that we needed to stress the fact that
the options "serial", "nographic", and "kvm" must all appear outside
of the angled brackets.
(From OE-Core rev: 845770e12b6ed51db3179f42de6b8deacdff5093)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section 4.1.2 lists plug-ins that need to be installed prior to installing
the Yocto Plug-in for Eclipse. I removed the Autotools plug-in
requirement per Jessica Zhang's instructions.
(From OE-Core rev: 94e3971c95e0549a0857f07e1a38d7b7628f0022)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the initial draft of the Using the Command Line chapter.
(From OE-Core rev: 76bbb867d6e4e9c49c9d4a2d9c453d0cdf692c44)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file is the initial XML file for the chapter on optionally
customizing the development packages installation.
(From OE-Core rev: 2e3d29d493d6a3be006e80e75e41a0ff9ad29564)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit is the initial draft of the preparation chapter (chapter 2).
(From OE-Core rev: c32b215eb37828cd31c0c9ba288c2216fcd034de)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit is the initial text for the introduction chapter.
(From OE-Core rev: 7c0899aa6d712e373bd1a2df1fb52dcf3a87b2fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The .aurthorgroup style uses a 'background-image' item to add the
book title image. This had to be changed to 'figures/adt-title.png'
from 'figures/kernel-title.png' since it is for the ADT manual.
(From OE-Core rev: 4c9dda2ac52139f67dc8e461c9f68a5d97d4690f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initial chapters were failing to make due to duplicate section
identifiers that were created when I copied in the original files.
I gave each of the five chapter files (adt-command.xml, adt-eclipse.xml,
adt-intro.xml, adt-package.xml, and adt-prepare.xml) unique identifier
tags.
(From OE-Core rev: d30460c835c51dcc9301bcd848ceda29ba9ceeb6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits take the Makefile from the version I copied over from
the Kernel manual to create the initial version for the ADT Manual.
(From OE-Core rev: 50c61a4fe2f4ad65d6934a3ec3799e6a64709ed3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the initial file that the Makefile calls. The changes in this
commit reflect edits taking it from the copied kernel manual version.
(From OE-Core rev: a7c2c126e4ab12e4ba13cd4cfad70b6556739bc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the title PNG file and removed the existing (copied)
kernel title PNG file.
(From OE-Core rev: a4a9c47c1bd1e53652f73cc76f781f1c5df8adcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have added a new directory to documentation named adt-manual.
This directory holds a Figures folder, and the 9 files needed
for the ADT manual. The book consists of five chapters:
adt-intro, adt-prepare, adt-package, adt-eclipse, and adt-command.
There is also a adt-manual.xml file called by the Makefile.
There is also a style.css file. And finally, a adt-manual-customization.xsl
file to control numbering.
(From OE-Core rev: ac2c8848bbefcf7d24192573904baaef87c67382)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Beth Flanagan