This prevents systemtap and dtrace being picked up from the host as
reported on the Yocto mailing list by Andre Haupt <andre@bitwigglers.org>
(From OE-Core rev: 0d883b5df25635fbad45191d297cbdf78a6c1fe0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Conflicts:
meta/recipes-core/glib-2.0/glib.inc
This fixes the network configuration for qemumips & qemuppc to match the
other qemu* machines.
(From OE-Core rev: cb181eb4dc2c20a70153f9d69d732978566ba4f7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base-files version is horribly outdated too.
[YOCTO #924]
(From OE-Core rev: f61df1f1e4a191ed3dd3d71aa78a479c615b14d1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes [YOCTO #780]
Handle the input/output data with different endian-ness correctly
Also fix the definition of LD_SO for cross environment
And remove the older 2.5 version of ldconfig-native recipe
(From OE-Core rev: 694db055f3729662e0e0193a31f2098be599877f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Introduces a variable HALTARGS which specifies the arguments sent to
halt and reboot, and sets the default value to "-d -f", dropping the
previous -i (shut down all network interfaces before halt/reboot, which
causes a freeze with NFS root.)
Fixes [YOCTO #997].
(From OE-Core rev: ace183894a5319cd73c94fd2653bbe52f29dca0b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows "umount -f -a -r" in our initscripts to actually do something.
(From OE-Core rev: 578c938968857976f888f708f1f57cf862c7b3c4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* add task to remove the GPLv3 lscpu code
* Add patch to remove the reference to lscpu in Makfiles
(From OE-Core rev: ebd181cf6ce3fe233b61aef3af093228aa925f4d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new patch:
coreutils-6.9/fix_for_manpage_building.patch
And the target recipe now depends on the native recipe for the manpage
generation.
Similar fix may be needed to the GPLv3 version of this recipe.
(From OE-Core rev: 543577c25b5a4e89a3ab15ee28e754b71c2a43d5)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #908] Added CPPFLAGS into the environment file and added
--sysroot to it.
(From OE-Core rev: 360daf019101d9b4d08ab1e3d279b08c02e9749e)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds a couple of new patches for handling various autoconf
and autolocal issues. It also hardcodes a GETTEXT_MACRO_VERSION
to 0.17 to match the native gettext.
(From OE-Core rev: e897103a58ad672cc87d2bab3ec45501ef09f8f1)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix rotate passwd check logic which will write data into un-allocated
memory.
This fixes [YOCTO #735]
(From OE-Core rev: 4499beb9ef70d207e0d1f60eae77634a77fc44c3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uuidgen is needed by zypper and we don't want to drag in everything else
in util-linux, so split it out to a separate package.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
One of ncurses's patch has been removed from its original repo
location, use autobuilder cache location instead.
Comment out the original patch address instead of removing it
since we may still need that address when upgrade the recipe later.
This fixes [BUGID #709].
[sgw: fixed having comment embedded in SRC_URI]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
I have a number of platforms which have no realtime clock
(i.e. no sense of what day/time it is). On these platforms,
poky dutifully tries to keep somewhat sane with stored
time stamps that are saved on reboot and restored early
on during initialization. A fair compromise.
However, before that code runs, the udev script tries to
restore well known devices using tar. This will often
lead to messages such as these since the kernel has no
way to set the time:
tar: dev/pts: implausibly old time stamp 1970-01-01 00:00:00
tar: dev/char/3:134: time stamp 1970-01-01 00:00:09 is 0.435041705 s in the future
The attached patch filters these messages out as they don't
convey anything useful and indeed are worrisome to more naive
users.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
>From a6773d3e00dbd168817730fff1c3fc7e1b6950f5 Mon Sep 17 00:00:00 2001
From: Gary Thomas <gary@mlbassoc.com>
Date: Thu, 17 Feb 2011 11:30:18 -0700
Subject: [PATCH] Suppress messages about bad time stamps during initial device setup
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
moving common code between populate_sdk.bbclass and meta-environment.bb
into toolchain-script.bbclass.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
A number of the recipes did not properly label their pre and post
actions, causing the actions to occur in all split packages. This
was corrected by defaulting to _${PN} in most cases.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
A recent busybox change added a "second" initscript to the main busybox
package. This however is not supported by the update-rc.d.bbclass.
Instead we split the package so that each initscript gets it's own split.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Fixes [BUGID #693]
The init-live.sh script starts udevd in init-live.sh:early_setup(),
but doesn't account for the possibility that the root device may have
already been registered by the kernel before udevd starts up.
If the device is detected after udevd starts up, everything's fine -
udevd gets the 'add' uevent for the device, the root image shows up at
e.g. /media/sda/rootfs.img, and the boot continues.
If however the device is detected before udevd starts up, udevd misses
the 'add' uevent and the root image never shows up, causing it to stay
in the 'waiting for removable media' loop forever.
The 'udevadm trigger' command is meant to be used to avoid this
situation, but init-live.sh doesn't use it. Furthermore, since the
default was changed in udev 152 from 'add' to 'change', the command
needs to explicity name 'add' as the action.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Add the mount lock patch that moves the lock file from the potentially R/O
/etc, to the R/W /var/lock directory.
This resolves a problem when mounting when / (and /etc) is mounted R/O.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Add a number of bug fixes, mostly imported from Fedora and Wind River
Linux.
cp-i-u: fix unnecessary prompting
fix-install: Fix installing to a dangling symlink
i18n: li18nux/lsb compliance
ls-x: Fix incorrect output
overflow: Fix potential overflow in who command
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
When the kernel is started using ip=dhcp, we want a way to be able to run
the udhcp client within busybox and not reset the interface.
When using the '-D' option to udhcpc, the defconfig script will be skipped
allowing the refresh without changing the network settings.
Also provide an initscript that can be used to detect ip=dhcp on the
kernel command line, if detected it will refresh the lease and set the
proper resolve.conf and related files, but not reset the interface.
Original code in Wind River Linux by Greg Moffatt <greg.moffat@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Move the populate_sdk task out of meta-toolchain. Made it more generic
to support rpm/deb package format.
This commit is dependant on a series of commit:
2ea0406e4516fc59dff86cb4adc35c82cb774c2f
7ffa45b7cfea24dae1b51f40cfc807bf78b21b66
bf201a74c243942af3fcae6f174496bdd819dbc0
3d29933f2925efe8a84f10efdf50396031c33ae4
3d29933f2925efe8a84f10efdf50396031c33ae4
9c724dbf57e610a9e06bbdce38383dee3ac49281
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
BBCLASSEXTEND dbus to nativesdk for meta-toolchain-qte, and disable the
dependency on libsm when building in this context (thus avoiding a number of
sub-dependencies).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
these two are useful in the development environment, and also required
by two LTP test cases (ld and ldd).
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
now the PATH for root user defined in a problematic way
PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin:
from eglibc:
/* Two adjacent colons, or a colon at the beginning or the end
of `PATH' means to search the current directory. */
that means current directory is always searched as the last path,
which could generate undesired behavior.
One example is found in LTP cron_deny01 test, which always complains
"sh: cron_deny01 not found"
cron_deny01 is a shell script which setups the initial test preparation
and then invokes itself for real test under a different user:
su $TEST_USER1 -c "$0"
'su' doesn't inherit PATH into the sub-shell, and thus $0 has to
be an absolute path to have right script found.
ltp appends the path of cron_deny01 to $PATH before running the test:
export PATH="${PATH}:${LTPROOT}/testcases/bin"
In ideal way "${LTPROOT}/testcases/bin/cron_deny01" is found and becomes
$0, which works well.
However due to the ending colon in original PATH:
PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin::${LTPROOT}/testcases/bin
$0 becomes 'cron_deny01' w/o leading path which makes sub-shell under 'su'
failed to locate cron_deny01.
remove ending colon then fixes this problem.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Change the name from toolchain-sdk to toolchain-gmae,
which is more accurate to what meta-toolchain-sdk generates
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Apply a couple of best practices to the recipe:
1) use the gettext class to ensure the right versions of gettext are
used for the recipe variants (target, native, etc).
2) use layout variables rather than absolute paths in the package FILES_
definitions.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Joshua Lock
Paul Eggleton
Richard Purdie
Nitin A Kamble
Tom Zanussi
Qing He
Tom Rini
Saul Wold
Lianhao Lu
Dongxiao Xu
Gary Thomas
Mark Hatle
Jingdong Lu
Kevin Tian
Jessica Zhang