Move the do_savedefconfig task definition from u-boot and kernel to
cml1.bbclass. There are more recipes which use the kbuild framework and
benefit from a do_savedefconfig task.
(From OE-Core rev: 2b2ed48903e09196ee20da7f66b1d3689e4a4473)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we are using 'ld-is-gold' as DISTRO_FEATURE, the U-Boot Makefile has
mechanisms to ensure that we use BFD as linker. However, this does not
work for the GCC when it is used as linking tool.
To support that, we added explicit BFD use whenever we have the
DISTRO_FEATURE feature enabled.
(From OE-Core rev: d36ee7a87c0d89b2820eea4bfcdae342adc75019)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The looping logic for handling (and not handling) UBOOT_CONFIG has led
to the various do_* functions to be large and unwieldy. In order to
modify one of the functional blocks inside of a loop (or in the else
condition) means you either have to replace the function entirely, or
append the function and undo something it did and then do what you need
for your change.
This refactor breaks out all of the inner loops and else clauses into
new functions that themselves can be overridden without needing to
worry about the bulk of the looping logic.
It should not break any existing recipes doing prepends, appends, or
overrides. None of the functional blocks were changed, just refactored
out into new functions.
(From OE-Core rev: 937bcc229502fcc154cc676b4fcc93c561873def)
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If i or j have not been unset in do_deploy:prepend functions, images are not correctly
copied to DEPLOYDIR.
(From OE-Core rev: 5a0764eaac90bd62dac4a387eed5eb68f556412f)
Signed-off-by: Florian Amstutz <florian.amstutz@scs.ch>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace references of WORKDIR with UNPACKDIR and B for U-Boot script
and variable UBOOT_ENV_BINARY, for example for boot.scr.
(From OE-Core rev: 62ff94ff40e823065178318133d54e44a3d8a46d)
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace references of WORKDIR with UNPACKDIR where it makes sense to do
so in preparation for changing the default value of UNPACKDIR.
(From OE-Core rev: 1f18b9a512800860d5153d89eb82b56388efad6f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we want to be able to stop unpacking to WORKDIR, correct the WORKDIR
references in recipe do_compile/do_install tasks to use UNPACKDIR in the
appropraite places instead.
(From OE-Core rev: d73595df69667fe9d12ecd407b77a0b8dae2109c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mkeficapsule is a tool provided by U-Boot (as part of the tools-only
targets) for generating UEFI capsule update archives.
Install mkeficapsule into a u-boot-tools-mkeficapsule package.
(From OE-Core rev: ab9380cd969cc0762a55e5e2c7a8ea6b697e3ae1)
Signed-off-by: Peter Hoyes <peter.hoyes@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
externalsrc only monitors files listed in CONFIGURE_FILES environment
variable to know if it should trigger a rebuild of do_configure. By
default it is unset, but the defconfig from U-Boot should be listed
otherwise an old defconfig may be used even though the change is
technically detected by the do_compile logic later in the process.
Because U-Boot recipe uses `make oldconfig` when no defconfig is passed,
monitor .config for that special case.
This fixes U-Boot recipes not detecting defconfig changes when
devtool'ed.
Reported-by: Iskander Amara <iskander.amara@theobroma-systems.com>
Cc: Quentin Schulz <foss+yocto@0leil.net>
(From OE-Core rev: fef517b5f978cf848b9cc40e8ce6bb2762681182)
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit cc6c3e31526d ("u-boot: Move definitions to common locations") moved
UBOOT_INITIAL_ENV to uboot-config.bbclass, but it should be kept at u-boot.inc
because it encodes ${PN} in it, which should be set by the U-Boot recipe.
Currently, whatever inherits uboot-config bbclass will fill-in its own PN,
which would change the content of UBOOT_INITIAL_ENV per-package.
Cc: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Cc: Marek Vasut <marex@denx.de>
Fixes: cc6c3e31526d ("u-boot: Move definitions to common locations")
(From OE-Core rev: 0b0c4b37d318b86f100512476ffd861e0ce1f47e)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid:
u-boot-1_2024.01-r0 do_package_qa: QA Issue: File /boot/u-boot-qemuriscv64-2024.01-r0.elf in package u-boot contains reference to TMPDIR [buildpaths]
by ensuring the compiler has the prefix mapping options passed in to it
to correctly remap the source paths and avoid the warning.
(From OE-Core rev: 85c6b06da641fdaf09f2cfe7066e0cf1185c7969)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade to U-Boot 2023.10.
The U-Boot 2023.10 tag is in the master branch, so switch the branch
back to master.
(From OE-Core rev: 6fce7f99ff5bacf7ad4b1816f462260fe41b38ee)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade to U-Boot 2023.07.02.
The U-Boot 2023.07.02 tag is not in the master branch, so switch the branch
from master to u-boot-2023.07.y.
(From OE-Core rev: 687d105ada21c6e0d9efe3acf6f4aa1c844d3d30)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch to fix the mkimage path length error has landed in
U-Boot upstream.
Update the Upstream-Status accordingly.
(From OE-Core rev: 9e4e728a03f69d0f42d22820926e056f2db09c21)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, uboot do_menuconfig task is breaking when UBOOT_CONFIG is
chosen rather than UBOOT_MACHINE, it simply fails with the following
errors:
| make: *** No rule to make target 'menuconfig'. Stio.
| Command failed.
| Press any key to continue...
this is due to the work directory of do_menuconfig is set to ${B} but
not ${B}/$config.
We should distinguish two situations:
1) When there is only one config item in UBOOT_CONFIG, do_menuconfig
should work just like how it works for UBOOT_MACHINE.
2) When there are multiple config items in UBOOT_CONFIG, do_menuconfig
should print out some information saying it's not supported other
than just failing.
This patch mainly aims to fix that by introducing a extra variable
KCONFIG_CONFIG_ENABLE_MENUCONFIG, it would be set to 'false' for
situation 2), and when it's set to 'true', then set
KCONFIG_CONFIG_ROOTDIR correctly in uboot-config.bbclass to let
do_menuconfig task work.
DEVTOOL_DISABLE_MENUCONFIG could be replaced by this new variable
KCONFIG_CONFIG_ENABLE_MENUCONFIG.
(From OE-Core rev: f9e834e317880cf47dbb4f8285bc36d743beae5e)
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While arm64 is a valid UBOOT_ARCH (according to mkimage -A) u-boot
keeps arm64 specific dts under 'arch/arm' directory.
As the result the recipe tries to install arch/arm64 (if UBOOT_DTB
was specified) and fails with [1]. Remapping "arm64" to "arm" to fix this
issue.
[1]
| install: cannot stat '.../u-boot/1_2023.01-r0/build/arch/arm64/dts/u-boot.dtb': No such file or directory
(From OE-Core rev: 3ca99403d5f320c6d7ae59b107f3b3bf183b4089)
Signed-off-by: Pavel Zhukov <pavel@zhukoff.net>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch to fix the tools-only_defconfig error has landed in
U-Boot upstream.
Update the Upstream-Status accordingly.
(From OE-Core rev: f0facfbebcc5e4d74f70740c920df4c7c0824086)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade to U-Boot 2023.01.
Remove the two patches that are now upstream:
e67f34f778ba ("riscv: support building double-float modules")
1dde977518f1 ("riscv: Fix build against binutils 2.38")
And add a patch that fixes u-boot-tools build.
(From OE-Core rev: ec69f295552d6dd4de755bb4562a007158cf660e)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To be able to use /boot files, like UBOOT_ENV_BINARY, in other
recipes, like kernel-fitimage.bbclass.
(From OE-Core rev: 5ed129c4e793c76e2ce9c762cc67c4c2232df447)
Signed-off-by: Fabre Sébastien <sebastien.fabre@actia.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The U-Boot signing code is a bit of a mess. The problem is that mkimage
determines the public keys to embed into a device tree based on an image
that it is signing. This results in all sorts of contortions: U-Boot has to
be available to the kernel recipe so that it can have the correct public
keys embedded. Then, the signed U-Boot has to be made available to U-Boot's
do_deploy. This same dance is then repeated for SPL. To complicate matters,
signing for U-Boot and U-Boot SPL is optional, so the whole process must be
seamlessly integrated with a non-signed build.
The complexity and interdependency of this process makes it difficult to
extend. For example, it is not possible to install a signed U-Boot binary
into the root filesystem. This is first because u-boot:do_install must run
before linux:do_assemble_fitimage, which must run before u-boot:do_deploy.
But aside from infrastructure issues, installing a signed U-Boot also can't
happen, because the kernel image might have an embedded initramfs
(containing the signed U-Boot).
However, all of this complexity is accidental. It is not necessary to embed
the public keys into U-Boot and sign the kernel in one fell swoop. Instead,
we can sign the kernel, stage it, and sign the staged kernel again to embed
the public keys into U-Boot [1]. This twice-signed kernel serves only to
provide the correct parameters to mkimage, and does not have to be
installed or deployed. By cutting the dependency of
linux:do_assemble_fitimage on u-boot:do_install, we can drastically
simplify the build process, making it much more extensible.
The process of doing this conversion is a bit involved, since the U-Boot
and Linux recipes are so intertwined at the moment. The most major change
is that uboot-sign is no longer inherited by kernel-fitimage. Similarly,
all U-Boot-related tasks have been removed from kernel-fitimage. We add a
new step to the install task to stage the kernel in /sysroot-only. The
logic to disable assemble_fitimage has been removed. We always assemble it,
even if the final fitImage will use a bundled initramfs, because U-Boot
will need it.
On the U-Boot side, much of the churn stems from multiple config support.
Previously, we took a fairly ad-hoc approach to UBOOT_CONFIG and
UBOOT_MACHINE, introducing for loops wherever we needed to deal with them.
However, I have chosen to use a much more structured approach. Each task
which needs to use the build directory uses the following pseudocode:
do_mytask() {
if ${UBOOT_CONFIG}; then
for config, type in zip(${UBOOT_CONFIG}, ${UBOOT_MACHINE}); do
cd ${config}
mytask_helper ${type}
done
else
cd ${B}
mytask_helper ""
fi
}
By explicitly placing the work in mytask_helper, we make it easier to
ensure that everything is covered, and we also allow bbappends files to
more easily extend the task (as otherwise they would need to reimplement
the loop themselves).
[1] It doesn't particularly matter what we sign. Any FIT will do, but I
chose the kernel's because we already went to the trouble of setting it up
with the correct hashes and signatures. In the future, we could create a
"dummy" image and sign that instead, but it would probably have to happen
in the kernel recipe anyway (so we have access to the appropriate
variables).
(From OE-Core rev: 5e12dc911d0c541f43aa6d0c046fb87e8b7c1f7e)
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add savedefconfig task which U-Boot supports (unfortunately not all
consumers of cml1 support this).
(From OE-Core rev: efc54f1f836651c8ef27a683a9e5d583c8ce87a6)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Splitting u-boot-configure.inc out of the base left duplicate
cml1.bbclass in the base include.
Fixes: fc9a17ad38 ("u-boot: Split do_configure logic into separate file")
(From OE-Core rev: 286f91f7659307bcdf0ba541b8d6b56db5604ceb)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+= allows custom layers to change the SRC_URI e.g. when
updating the whole recipe to newer u-boot version.
With :append, there is no way to change the variable
from a bbappend.
(From OE-Core rev: be96b384ce964ff14536d3bc40c89851a12dfb60)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pkg-config is used by the Makefiles, and thus pkgconfig needs to be
inherited.
(From OE-Core rev: 6148ac9bc5d3e0d0ffdbbd6695acd96ca1836b78)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An automated conversion using scripts/contrib/convert-spdx-licenses.py to
convert to use the standard SPDX license identifiers. Two recipes in meta-selftest
were not converted as they're that way specifically for testing. A change in
linux-firmware was also skipped and may need a more manual tweak.
(From OE-Core rev: ceda3238cdbf1beb216ae9ddb242470d5dfc25e0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure right ABI and march is used which matches OE core settings
(From OE-Core rev: 17cd727f333580c6fd7ff20c90ede9ccce9ef60b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some auxiliary u-boot recipes may need u-boot properly configured
(including *.cfg additions via bbappends) but aren't necessarily
building u-boot itself; to support such situations, here we split the
u-boot do_configure() out of u-boot.inc and into its own
u-boot-configure.inc.
(From OE-Core rev: e55e6fb4983a41f74c0e457bf54bd8dfa5608daa)
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is uncertainty about the default branch name in git going forward.
To try and cover the different possible outcomes, add branch names to all
git:// and gitsm:// SRC_URI entries.
This update was made with the script added to contrib in this patch which
aims to help others convert other layers.
(From OE-Core rev: b51c405faf6f8c0365f7533bfaf470d79152a463)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A previous commit (a3d3c2d4ac) introduced
support for compiling a U-Boot boot script, but the logic contained a
syntax error which was only visible in the build log. Fix the error by
using separate []s for each expression in the if statement.
(From OE-Core rev: e33994157abbea897ceaf465f9d2a99a9c8212b1)
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add extra SRC variables to uboot-config.class for source cmd file
* Add DEPENDS on u-boot-mkimage-native if UBOOT_ENV_SUFFIX is scr
* Compile cmd -> scr in do_compile if UBOOT_ENV_SUFFIX is scr
(From OE-Core rev: 0ea02ca5c1fc4e15f640b1c26c0a5ce34fc08c05)
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the u-boot binary name configurable. Use the existing variable
UBOOT_BINARYNAME which is evaluated from the UBOOT_BINARY.
(From OE-Core rev: e588cde6aed1e699a055e3481df0f3dc719c9774)
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the SPL suffix configurable via SPL_SUFFIX variable to support SPL
binaries with suffix. The suffix is optional and empty per default. The
delimiter in front of the suffix is added automatically if the suffix
is not empty. A new variable SPL_BINARYFILE contains the binary file
name inclusive optional delimiter and suffix and the old variable
SPL_BINARYNAME contains only the name of the binary without directory,
delimiter and specified suffix. This behavior is backward compatible
with empty SPL_SUFFIX variable.
(From OE-Core rev: e4cfec633c20d6406523da905530e887b853f7ed)
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adrian Freihofer
Otavio Salvador
Ryan Eatmon
Fabio Estevam
Florian Amstutz
Leon Anavi
Richard Purdie
Wang Mingyu
Peter Hoyes
Quentin Schulz
Mingli Yu
Stefano Babic
Ming Liu
Pavel Zhukov
Xiaotian Wu
Fabre Sébastien
Sean Anderson
Alex Kiernan
Mikko Rapeli
Alexander Kanavin
Peter Kjellerstedt
Khem Raj
Zev Weiss
Marek Vasut
Stefan Herbrechtsmeier