1
0
mirror of https://git.yoctoproject.org/poky synced 2026-05-08 05:09:24 +00:00
Commit Graph

63420 Commits

Author SHA1 Message Date
Bruce Ashfield fda534a735 linux-yocto/5.13: update to v5.13.13
Updating linux-yocto/5.13 to the latest korg -stable release that comprises
the following commits:

    7aeadb5bb82a Linux 5.13.13
    2ff626b14003 fs: warn about impending deprecation of mandatory locks
    a57b2a703e44 io_uring: fix xa_alloc_cycle() error return value check
    515b6124df6a hugetlb: don't pass page cache pages to restore_reserve_on_error
    371fb63d0926 kfence: fix is_kfence_address() for addresses below KFENCE_POOL_SIZE
    9690e6ffac0b mm/hwpoison: retry with shake_page() for unhandlable pages
    59e5c9ecdeb0 mm,hwpoison: make get_hwpoison_page() call get_any_page()
    e4e8c58cc78e mm: memcontrol: fix occasional OOMs due to proportional memory.low reclaim
    2d1704c3fe30 riscv: Fix a number of free'd resources in init_resources()
    8c5beac92d0e ASoC: intel: atom: Fix breakage for PCM buffer address setup
    8f4eb032a019 ALSA: hda/realtek: Limit mic boost on HP ProBook 445 G8
    59734f7eaaa4 PCI: Increase D3 delay for AMD Renoir/Cezanne XHCI
    00609919ec4d powerpc/32s: Fix random crashes by adding isync() after locking/unlocking KUEP
    33bd5804ac66 powerpc/32s: Refactor update of user segment registers
    efe40fdb6d30 powerpc/32s: Move setup_{kuep/kuap}() into {kuep/kuap}.c
    534a0bc7c87a usb: typec: tcpm: Fix VDMs sometimes not being forwarded to alt-mode drivers
    21d6e237bcc2 s390/pci: fix use after free of zpci_dev
    fe2edb82e5be ALSA: hda/via: Apply runtime PM workaround for ASUS B23E
    41f0262ffb44 tracing: Apply trace filters on all output channels
    f7c707f8ec18 btrfs: prevent rename2 from exchanging a subvol with a directory from different parents
    ddd7fff18986 mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711
    f41b4c30fb73 mmc: sdhci-iproc: Cap min clock frequency on BCM2711
    70063522ee90 opp: Drop empty-table checks from _put functions
    30392f88dace ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9510 laptop
    da8495661fe9 io_uring: only assign io_uring_enter() SQPOLL error in actual error case
    501449420a42 io_uring: fix code style problems
    606f36948a9a ipack: tpci200: fix memory leak in the tpci200_register
    d09bfebbdf22 ipack: tpci200: fix many double free issues in tpci200_pci_probe
    c1001de019ef slimbus: ngd: reset dma setup during runtime pm
    c8f6e68a95c2 slimbus: ngd: set correct device for pm
    28b55e58b864 slimbus: messaging: check for valid transaction id
    e0e46e209e9d slimbus: messaging: start transaction ids from 1 instead of zero
    65a4722bb931 tracing / histogram: Fix NULL pointer dereference on strcmp() on NULL event name
    0ce48083d843 tracing: define needed config DYNAMIC_FTRACE_WITH_ARGS
    2152ee71c164 ALSA: hda - fix the 'Capture Switch' value change notifications
    8681e95da50b cfi: Use rcu_read_{un}lock_sched_notrace
    82d1ea87b9d5 arm64: clean vdso & vdso32 files
    03c33905ee88 clk: qcom: gdsc: Ensure regulator init state matches GDSC state
    95e5238a2fba clk: imx6q: fix uart earlycon unwork
    2fcb62673120 mmc: sdhci-msm: Update the software timeout value for sdhc
    87762c77c39f mmc: mmci: stm32: Check when the voltage switch procedure should be done
    fffcf7fc898a mmc: dw_mmc: Fix hang on data CRC error
    7179eac5556e iommu/dma: Fix leak in non-contiguous API
    b89542f4a60b net: dpaa2-switch: disable the control interface on error path
    5d547d83abb2 Revert "flow_offload: action should not be NULL when it is referenced"
    260b1eb312a0 iavf: Fix ping is lost after untrusted VF had tried to change MAC
    ea1cf8a6d966 i40e: Fix ATR queue selection
    1d9d64cad2fe PCI/sysfs: Use correct variable for the legacy_mem sysfs object
    f21adfddafdf r8152: fix the maximum number of PLA bp for RTL8153C
    5809f8d9b7c0 r8152: fix writing USB_BP2_EN
    dedbf29c6b36 mptcp: full fully established support after ADD_ADDR
    828c3a32238c mptcp: fix memory leak on address flush
    11c79e1615a4 net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port
    751f4b539afb drm/amd/display: Use DCN30 watermark calc for DCN301
    e0f2d91e0869 drm/i915: Tweaked Wa_14010685332 for all PCHs
    678b67771cef drm/i915: Skip display interruption setup when display is not available
    936eca018fee iommu/vt-d: Fix incomplete cache flush in intel_pasid_tear_down_entry()
    4e4f3cb41d68 net: usb: asix: refactor asix_read_phy_addr() and handle errors on return
    cf4c1661c40e ovs: clear skb->tstamp in forwarding path
    9581895b37fe net: mdio-mux: Handle -EPROBE_DEFER correctly
    b2973b87ba11 net: mdio-mux: Don't ignore memory allocation errors
    0e805b74cd13 sch_cake: fix srchost/dsthost hashing mode
    ac161cf77818 ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
    7af09aeddbae net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
    39af3583c8fb mac80211: fix locking in ieee80211_restart_work()
    0de9c4de5ca1 virtio-net: use NETIF_F_GRO_HW instead of NETIF_F_LRO
    9213ce667258 vrf: Reset skb conntrack connection on VRF rcv
    a5607b1d8e34 bnxt_en: Add missing DMA memory barriers
    020761f49efb bnxt_en: Disable aRFS if running on 212 firmware
    1a2798f36805 ptp_pch: Restore dependency on PCI
    010d7ad77e2d net: 6pack: fix slab-out-of-bounds in decode_data
    47d43f06fd87 soc: fsl: qe: fix static checker warning
    5eb70221eb03 bnxt: count Tx drops
    40c767494e15 bnxt: make sure xmit_more + errors does not miss doorbells
    781279257968 bnxt: disable napi before canceling DIM
    7edc1a0deca8 bnxt: don't lock the tx queue from napi poll
    a89ba11b263b bpf: Clear zext_dst of dead insns
    3d7f5031f870 drm/mediatek: Add component_del in OVL and COLOR remove function
    e5f25a6ea31a drm/mediatek: Add AAL output size configuration
    88e35118e7c9 vdpa/mlx5: Fix queue type selection logic
    c903a1fd0968 vdpa/mlx5: Avoid destroying MR on empty iotlb
    29236481a883 vDPA/ifcvf: Fix return value check for vdpa_alloc_device()
    080d65ba644f vp_vdpa: Fix return value check for vdpa_alloc_device()
    434887c6ac41 vdpa_sim: Fix return value check for vdpa_alloc_device()
    83f6738578b3 vhost: Fix the calculation in vhost_overflow()
    dcd6c72344f3 bus: ti-sysc: Fix error handling for sysc_check_active_timer()
    8a821b88b1a6 vhost-vdpa: Fix integer overflow in vhost_vdpa_process_iotlb_update()
    6caaf9fcb7b4 virtio: Protect vqs list access
    b380dfb298da dccp: add do-while-0 stubs for dccp_pr_debug macros
    5238de0459c0 cpufreq: armada-37xx: forbid cpufreq for 1.2 GHz variant
    ed6b6c758b67 soc: fsl: qe: convert QE interrupt controller to platform_device
    b39db8c4397d mtd: rawnand: Fix probe failure due to of_get_nand_secure_regions()
    dd53a5f93b2e mt76: fix enum type mismatch
    c442bd5a0e20 arm64: dts: qcom: sdm845-oneplus: fix reserved-mem
    ae19ca1cb3f0 arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem
    1c4678cb01ee cpufreq: arm_scmi: Fix error path when allocation failed
    731825e59e1d iommu: Check if group is NULL before remove device
    02491c3d81ef arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping
    aa9cac63e49c arm64: dts: qcom: msm8992-bullhead: Remove PSCI
    6fed550393b8 arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x
    73bb2572339d mtd: rawnand: Add a check in of_get_nand_secure_regions()
    85f5d3d0bc2e kyber: make trace_block_rq call consistent with documentation
    a6488cc30f01 drm/amd/display: workaround for hard hang on HPD on native DP
    a4ebe05cd99e drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1X
    5fd92907a473 spi: cadence-quadspi: Fix check condition for DTR ops
    d6080ac32e3e perf/x86: Fix out of bound MSR access
    cae49c93c71c net: usb: lan78xx: don't modify phy_device state concurrently
    d45f37c6120e net: usb: pegasus: Check the return value of get_geristers() and friends;
    e5f45fdefd8d ARM: dts: nomadik: Fix up interrupt controller node names
    56dcfd2e0145 qede: fix crash in rmmod qede while automatic debug collection
    0620a81e8040 drm/amdgpu: fix the doorbell missing when in CGPG issue for renoir.
    c6751ce1a2a4 scsi: core: Fix capacity set to zero after offlinining device
    87820c748fda scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
    7bbfccc78e0e scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()
    f57f3722788e scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
    fa3c19ceaa8b scsi: pm80xx: Fix TMF task completion race condition
    c589360bd3a9 dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available
    d09867c795c3 ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
    38df50afe852 net: xfrm: Fix end of loop tests for list_for_each_entry
    1718285e1419 spi: spi-mux: Add module info needed for autoloading
    7c6e26d59bfb dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()
    fcd998a0536e dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfers
    d9aee1535e7b USB: core: Fix incorrect pipe calculation in do_proc_control()
    08fb58a2c3dc USB: core: Avoid WARNings for 0-length descriptor requests
    261d195d5fe6 io_uring: Use WRITE_ONCE() when writing to sq_flags
    e8daa0dd99c9 mtd: cfi_cmdset_0002: fix crash when erasing/writing AMD cards

(From OE-Core rev: 1dc896275f31df9b620f22c94fc478252e24c514)

Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie 92d1ba8dbb Revert "default-distrovars.inc: Set BBINCLUDELOGS to empty to disable printing failed task output multiple times"
There are fixes in bitbake which should now allow this to operate as expected.

(From OE-Core rev: b7f9980a5b2d29ac289b8cfde67779c11fda41d3)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Joshua Watt d584f9c6bd bitbake: cooker: Allow upstream for local hash equivalence server
The hash equivalence server has had the option to support a read-only
upstream server for some time now when launched as a standalone program,
but there was no way to set the upstream when using a locally started
server. Add a new variable called BB_HASHSERVE_UPSTREAM that can be used
to specify an upstream server when a local hash equivalence server is
used (e.g. BB_HASHSERVE is "auto")

(Bitbake rev: 250fa17f1391ff1ee01ab9b51d2a4f9aa35c1d1e)

Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie 15c87c405f bitbake: runqueue: Clean up task stats handling
When we parallelised normal and setscene tasks, the task stats
handling was left separate pending further thought. We had to remove
handling of the setscene tasks from the UI in order to maintain
consistent task numbering.

Currently, "0 of 0" tasks can be shown as setscene tasks execute
until the first normal task runs.

The only use left for sq_stats is in the active task numbers which
we can use the length of sq_ive for instead. We can therefore
drop it and return stats in all cases. This removes the "0 of 0" task
problem since the stats in all normal and setscene tasks matches.

[YOCTO #14479]

(Bitbake rev: eae6e947e37e18cded053814bd2a268b44fb25cd)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie e75e89b418 bitbake: cookerdata: Show error for no BBLAYERS in bblayers.conf
If there is no BBLAYERS set in bblayers.conf show a more helpful
error and exit.

[YOCTO #14340]

(Bitbake rev: 97183e10faf9862b5d9489d6e2c27ac77c3b697d)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie 38deb04a38 bitbake: cookerdata: Improve missing core layer error message
If the core layer is missing from bblayers.conf, the message the user sees is
hard to understand. Improve it.

[YOCTO #14340]

(Bitbake rev: 5815a7258ebb8a989e0c6f5798853559d9413f02)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie 433cff7297 bitbake: fetch2: Add recursion guard
Users sometimes put ${S} references in ${SRC_URI} without realising this can be
problematic. Improve the error messages if they accidentally do.

[YOCTO #11593]

(Bitbake rev: 89e0b19ec0b245a6cd414088904c91808e8814ab)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie d0389d202c bitbake: data_smart: Improve error display for handled exceptions
We don't need tracebacks for BBHandledException. Reduces confusing output like:

ERROR: /meta/recipes-core/images/core-image-tiny-initramfs.bb: Circular task dependencies as do_image_complete depends itself via the chain do_image_complete -> do_packageswu -> do_image_qa -> do_image -> do_image_cpio
ERROR: ExpansionError during parsing /meta/recipes-core/images/core-image-tiny-initramfs.bb
Traceback (most recent call last):
  File "/bitbake/lib/bb/build.py", line 1050, in follow_chain(task='do_image_qa', endtask='do_build', chain=['do_image_complete', 'do_packageswu', 'do_image_qa', 'do_image', 'do_image_cpio']):
                     if task in deps:
    >                    follow_chain(othertask, endtask, chain)
             chain.pop()
  File "/bitbake/lib/bb/build.py", line 1050, in follow_chain(task='do_image', endtask='do_build', chain=['do_image_complete', 'do_packageswu', 'do_image_qa', 'do_image', 'do_image_cpio']):
                     if task in deps:
    >                    follow_chain(othertask, endtask, chain)
             chain.pop()
  File "/bitbake/lib/bb/build.py", line 1050, in follow_chain(task='do_image_cpio', endtask='do_build', chain=['do_image_complete', 'do_packageswu', 'do_image_qa', 'do_image', 'do_image_cpio']):
                     if task in deps:
    >                    follow_chain(othertask, endtask, chain)
             chain.pop()
  File "/bitbake/lib/bb/build.py", line 1038, in follow_chain(task='do_image_complete', endtask='do_build', chain=['do_image_complete', 'do_packageswu', 'do_image_qa', 'do_image', 'do_image_cpio']):
             if task in chain:
    >            bb.fatal("Circular task dependencies as %s depends itself via the chain %s?!" % (task, " -> ".join(chain)))
             chain.append(task)
  File "/bitbake/lib/bb/__init__.py", line 165, in fatal:
         mainlogger.critical(''.join(args), extra=kwargs)
    >    raise BBHandledException()

to the real error:

ERROR: /media/build1/poky/meta/recipes-core/images/core-image-tiny-initramfs.bb: Circular task dependencies as do_image_complete depends itself via the chain do_image_complete -> do_packageswu -> do_image_qa -> do_image -> do_image_cpio

(Bitbake rev: 551d4c0576a0a0c3406000029df9238b312f2263)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie 3a8cb949a9 bitbake: build: Catch and error upon circular task references
If there are circular task references, error on them rather than show
a recursion error. A simple reproducer is:

"""
do_packageswu () {
       :
}

addtask do_packageswu after do_image_complete before do_image_qa
"""

into image_types.bbclass. There is code in runqueue to detect these but
we never get that far with the current codebase.

[YOCTO #13140]

(Bitbake rev: 339d4d6be515a71311b81fb9e99742af0d8a5130)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie 3a737a783c bitbake: data_smart: Make ExpansionErrors more readable
This adds context to ExpansionError messages which show the variable chain for which
expansion is being attempted. This should allow users to debug the issues more easily
than the current message (the first line alone below). Example output from a
SRC_URI which references ${S}:

bb.data_smart.ExpansionError: Failure expanding variable PV, expression was 0.1+git${SRCPV} which triggered exception RecursionError: maximum recursion depth exceeded while calling a Python object
The variable dependency chain for the failure is: PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV -> PV -> WORKDIR -> S -> SRC_URI -> SRCPV
-> PV -> BP -> FILESPATH

which is more useful that no output. We could truncate at repetition but I suspect
this makes this clearer as it stands so there is little value in complicating the code.

(Bitbake rev: 699634bec47964fa7ab18689dc23db6f0bc22fb3)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie f49854c1f7 bitbake: build: Avoid duplicating logs in verbose mode
With "bitbake -v", for task failures you'd see the log output twice. Avoid
this by using the existing "did we print info" switch.

(Bitbake rev: e2c1afda4cb8023ed4ffeb5dc5bee4f0055659a8)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie ba4a61e69c bitbake: process: Don't include logs in error message if piping them
If the caller is piping the logs, they likely don't want them in the error exception
as well. This removes duplicate output from the build output allowing the UI level
controls on whether to show logs to work correctly.

(Bitbake rev: fc58ad84a9deb2620ad90611684dad65dafedb11)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie c2b40b0f6d bitbake: build: Handle SystemExit in python tasks correctly
If a python task fails with sys.exit(), we currently see no TaskFailed event.
The high level code does detect the exit code and fail the task but it can
leave the UI inconsistent with log output.

Fix this be intercepting SystemExit explicitly. This makes python
task failures consistent with shell task failures.

(Bitbake rev: 9eee9fd4f2f96789ad2b037e74d561bdc1426856)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie 444592b763 bitbake: build: Match markup to real function name
The point of the injected text is to identify where the function comes from. Using
the correct function name would therefore be better.

(Bitbake rev: 30c6ff8551c235254ab90663ab88f66bb0c71edb)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-11 22:39:19 +01:00
Richard Purdie ad0ffb6f9f bitbake: parse_py: Drop deprecated function reference
This is now used from bb.parse everywhere so drop this long deprecated reference.

(Bitbake rev: aaa5292ef96ea27f505bc5c5a4b1eb4f497ed061)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:26:04 +01:00
Richard Purdie 81f47730b3 bitbake: persist_data: Drop deprecated/unused function
This class has long since been deprecated and is unused, drop it. I'd love
to get rid of the rest of persist_data but it is still used by the fetcher,
sadly.

(Bitbake rev: 1c574aae8c8ec427f27ab0d68bac9e7483016f18)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:26:04 +01:00
Quentin Schulz 855334b0f7 bitbake: doc: bitbake-user-manual-fetching: S should be set to WORKDIR/git for git fetcher
Document that S has to be set to "${WORKDIR}/git" in order for the
recipe to work if the git fetcher is fetching the main source of code
for the recipe.

(Bitbake rev: c394f34437686c2f57a27f0c06d7aeb3268bfd41)

Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:26:04 +01:00
Richard Purdie b063499763 pseudo: Update with fcntl and glibc 2.34 fixes
Pull in the following changes:

* ports/linux/guts: Add closefrom support for glibc 2.34
* pseudo_client: Make msg static in pseudo_op_client
* ports/linux/guts: Add close_range wrapper for glibc 2.34
* pseudo_client: Do not pass null argument to pseudo_diag()
* test-openat: Consider device as well as inode number
* test: Add missing test-statx test case
* fcntl: Add support for fcntl F_GETPIPE_SZ and F_SETPIPE_SZ

(From OE-Core rev: 71b549924a7fa7973a8e03e11f3db45fdc29889d)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:25:39 +01:00
Hsia-Jun(Randy) Li 73967f5e6f cross-canadian: make android pass target sys check
We could build an Android toolchain but its triple should
always contain the string android or clang can't link
the right object files for it.

(From OE-Core rev: e9527164cfd628cfd3def2077cc19e75add06db8)

Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:25:38 +01:00
Alexander Kanavin 714f11a72d core-image-ptest-all: bump RAM requirement to 4G
/tmp is half that, and lttng-ptest writes just under 1G there
(and just over 1G on aarch64), so let's have a safe margin.

(From OE-Core rev: ef39039cac5819b2e1d65838367ff2be69eab4c2)

Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:25:38 +01:00
Alexander Kanavin 84e0778f0a lttng: update 2.12 -> 2.13.0
Drop 0001-tests-regression-disable-the-tools-live-tests.patch
(mass-disabling of ptests) and replace that with more targeted fixes:

- a patch that adds explicit sleeps where races due to too tight timings
were observed (not a proper fix; upstream needs to figure out how
to sync explicitly and reliably)

- LD_LIBRARY_PATH so that helper binaries are able to find their
custom libraries they're linked with (we strip rpath from them
for reproducibility)

- set pgrep location explicitly as it used unconditionally
on target, but auto-detected (incorrectly) on the host

- enable kmod as it is available in target images

- correct various missing scripts, binaries, and inhibit stripping
where that is expected.

License-Update: license info consolidated in LICENSE
(From OE-Core rev: 750d640f12b5c6804af51a67e23d4aca93564b79)

Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:25:38 +01:00
Ross Burton d42e12a0bd create-spdx: handle CLOSED license
The special CLOSED license means that this is closed source code with
no other licensing assertions.  It's not a generic license in oe-core,
and not a SPDX license, so transform it to NONE explicitly.

(From OE-Core rev: b71bfba1b5076ad1b9a10c08ef0e3393ccbed92a)

Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:25:38 +01:00
Robert Yang dbac3e8432 assimp: Remove it
Remove it since it has license issues:

* scripts/StepImporter/schema_ifc2x3.exp
Copyright by: International Alliance for Interoperability, 1996-2005 All rights
reserved. No part of this documentation may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, without the prior
written permission of the owner

* test/models-nonbsd/X/dwarf-Read-Me.txt
RESTRICTIONS: This model pack is available for use in freeware, shareware,
commercial games/software with the following restrictions:- **You may not
sell/re-sell this model pack or claim it as your own. ***You may not
redistribute this pack in some other model pack through a website or on a
compilation CD of any kind, without my written consent. Psi
http://www.psionic3d.co.uk

* test/models-nonbsd/B3D/turtle.source.txt
Copyright 2004, Psionic Design e-mail: psionic@blueyonder.co.uk Used with
permission. RESTRICTIONS: This model pack is available for use in freeware,
shareware, commercial games/software with the following restrictions:- **You
may not sell/re-sell this model pack or claim it as your own. ***You may not
redistribute this pack in some other model pack through a website or on a
compilation CD of any kind, without my written consent.

And no recipes depend on it, so remove it.

(From OE-Core rev: 92719e01a90f2a80f5cceb2f98a48c49f0c24f1c)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:25:38 +01:00
Quentin Schulz ea71f54102 conf/mips: mips16e: prepend override to MACHINEOVERRIDES
Add the tune specific override to MACHINEOVERRIDES and not OVERRIDES as
is done for all other tune include files.

Also prepend it instead of appending so that it's among the leftmost
overrides in MACHINEOVERRIDES and has a lower precedence compared to
other MACHINEOVERRIDES added later (which usually are added via a =.
(prepend)).

(From OE-Core rev: c1d524cae8ba5aa1e30e4a66937b8af3d4a67531)

Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:25:38 +01:00
Richard Purdie fa811bef85 oeqa/oescripts: Fix after tar recipe changes
(From OE-Core rev: d8862f5b85266b2f8592cb1efe23e377c10c7b7d)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:25:38 +01:00
Mingli Yu 966365a6a3 tar: add pkgconfig for selinux
Add pkgconfig setting for selinux.

(From OE-Core rev: 348ce6f8d5f5f3f598d01d8db55d575a972fe847)

Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:25:38 +01:00
Mingli Yu f47964be45 findutils: add pkgconfig for selinux
Add pkgconfig setting for selinux.

(From OE-Core rev: 7cc66fcdf8c2cec16533a4d7a6032ea2986b9079)

Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:25:38 +01:00
Mingli Yu 2c97f0e299 coreutils: add pkgconfig for selinux
Add pkgconfig setting for selinux.

(From OE-Core rev: ee48a2dbfb9e79225774c69a08a92a88dc9ac1d9)

Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-10 09:25:38 +01:00
Richard Purdie fd9c3a5a14 bitbake: runqueue: Fix issues with multiconfig deferred task deadlock messages
In multiconfig builds with large numbers of identical tasks, builds were
deadlocking after recent runqueue changes upon rebuilds where there was
heavy sstate usage (i.e. on second builds after a first completed).

The issue was that deferred tasks were being left indefinitely on
the deferred list. The deadlock handler was then "breaking" things
by failing tasks that had already succeeded, leading to the task
being on both covered and not covered lists, giving a further error.

The fix is to clean up the deferred task list when each setscene task
completes. I'd previously been hoping to avoid iterating that list
but it appears unavoidable.

[YOCTO #14342]

(Bitbake rev: ae24a0f2d2d8b4b5ec10efabd0e9362e560832ea)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-08 15:33:14 +01:00
Richard Purdie 7e599a1feb bitbake: runqueue: Avoid deadlock avoidance task graph corruption
If the deferred task deadlock avoidance code triggers, it could mark an executed
task as failed which leads to "covered and not covered" error messages. Improve
the logic so if the deadlock code is triggered, it doesn't cause the errors.

(Bitbake rev: 51bdd6cb3bd9e2c02e261fb578bb945b86b82c75)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-08 15:33:14 +01:00
Saul Wold 745bc89574 create-spdx: remove trailing comma
The trailing comma turns ref_id into an object instead of a string
when added to the relationship table.

(From OE-Core rev: ec20e1a0e0ba61a7615b361bfc9d9dc58a91f9b3)

Signed-off-by: Saul Wold <saul.wold@windriver.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-08 15:32:55 +01:00
Scott Weaver 7de1e4cd7a bitbake: bitbake: tests/fetch: add and fix npm tests
This adds one new test that verifies the use of a specific filename
when defined in PREMIRRORS.

bb.tests.fetch.NPMTest:
	- test_npm_premirrors_with_specified_filename

While testing bz#13039, it was found that test_npm_registry_alternate
fails with ENOTFOUND. This was corrected by using npmjs's public mirror.

The change to fetch2 for bz#13039 highlighted an issue with the
test_npm_premirrors test where the created file:// mirror was using the
downloadfilename rather than the tarball that is defined by the npm url.

(Bitbake rev: 5ba191a0407af9e652e3b86302dce3e952d6b587)

Signed-off-by: Scott Weaver <weaverjs@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-07 21:54:39 +01:00
Scott Weaver 3b58b1fc1c bitbake: bitbake: tests/fetch: add downloadfilename tests
This adds three new tests which evaluate different use cases of the
downloadfilename property.

bb.tests.fetch.FetcherNetworkTest:
	- test_fetch_specify_downloadfilename
	- test_fetch_premirror_specify_downloadfilename_regex_uri
	- test_fetch_premirror_specify_downloadfilename_specific_uri

(Bitbake rev: 61db3e96530d650e098436fd086f0182d32998f7)

Signed-off-by: Scott Weaver <weaverjs@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-07 21:54:39 +01:00
Scott Weaver 4939a41982 bitbake: bitbake: fetch2: fix premirror URI when downloadfilename defined
When downloadfilename is defined in a recipe's SRC_URI and PREMIRRORS is also
defined using the same URI, the downloadfilename is appended to the mirror
URI and it should not be.

[YOCTO #13039]

(Bitbake rev: 8a3ff9f3eaf19d4258eb070c5dc230dface269b2)

Signed-off-by: Scott Weaver <weaverjs@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-07 21:54:39 +01:00
Randy MacLeod 77ee567007 tcmode-default: add rust to the default toolchains
Remove the rust_versions.inc file and put it's content
in tcmode-default.inc is done for other toolchains.

Rename RUST_VERSION to RUSTVERSION to adhere to the
naming format used for other languages.

(From OE-Core rev: e56c4e0dca3ca6187271031d4f30c76a42879639)

Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-07 21:54:11 +01:00
Robert P. J. Day abeb2e95c6 systemd: '${systemd_unitdir}/system' => '${systemd_system_unitdir}'
Repo-wide replacement to use newer variable to represent systemd
system unitdir directory.

(From OE-Core rev: 5ace3ada5c54500c71becc8e0c6eddeb8bc053e3)

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-07 21:54:11 +01:00
Robert P. J. Day 3a70262357 image_types_wic.bbclass: alphabetize list of WICVARS
It's way easier to scan a list of variables if they're sorted one per
line.

(From OE-Core rev: aec6fcb98c7dabf16779efb333be09d73d9f4ee0)

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-07 21:54:11 +01:00
Richard Purdie 1ad2ae0497 go: Exclude CVE-2021-29923 from report list
Upstream don't believe it is a signifiant real world issue and will only
fix in 1.17 onwards. Therefore exclude it from our reports.

https://github.com/golang/go/issues/30999#issuecomment-910470358

(From OE-Core rev: 5bd5faf0c34b47b2443975d66b71482d2380a01a)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-07 21:54:11 +01:00
Richard Purdie 8632de2d7a flex: Add CVE-2019-6293 to exclusions for checks
CVE is effectively disputed - yes there is stack exhaustion but no bug and it
is building the parser, not running it, effectively similar to a compiler ICE.
Upstream no plans to address and there is no security issue.

https://github.com/westes/flex/issues/414

(From OE-Core rev: 0cae5d7a24bedf6784781b62cbb3795a44bab4d1)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-07 21:54:11 +01:00
Richard Purdie 23d95eb656 utils: Drop obsolete oe_machinstall function
This function does something similar to the bitbake fetcher file search
paths and is an old remnant of how this could have once been handled. There
are no users in OE-Core and we'd always prefer the fetcher to handle this now
as it handles signatures correctly. The direct OVERRIDES reference would
likely break any user of the function. Remove it to be safe and ensure it
isn't being used anywhere.

(From OE-Core rev: d49ba0243e3d28672d16cd02753eb7e85d91bbab)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-07 21:54:11 +01:00
Richard Purdie 8914bc77b4 utils: Drop unused variable staging_install from oe_libinstall
Remove unused variable/code.

(From OE-Core rev: 76ade5a2a55eda2975dfa5d6a30ac4cb74421567)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-07 21:54:11 +01:00
Quentin Schulz 7c1215e821 bitbake: doc: bitbake-user-manual-execution: remove mention to long-gone BBHASHDEPS variable
BBHASHDEPS was removed from bitbake in April 2014, with the following
commit:
92526eadd09d "bitbake-worker: Drop BBHASH variables"

so let's remove mentions from the docs.

(Bitbake rev: 7816a8de70adc3806a3739384cf08b281b4ee401)

Signed-off-by: Quentin Schulz <foss@0leil.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-06 10:19:03 +01:00
Michael Opdenacker 0c16f67afe bitbake: bitbake-user-manual: replace "file name" by "filename"
There are many more instances of "filename" or "filenames" than
of "file name" or "file names".

The winner takes it all!

(Bitbake rev: dcd115176f63256f10db0b24b563683c4bdf8f96)

Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-06 10:07:53 +01:00
Khem Raj cb73383fb9 vim: Add packageconfig for sound notification support
vim uses libcanberra to implement sound, currently its ok for target
since we have captured dependencies in recipe sysroot but things go a
bit out of control when building vim-native, where configure starts to
poke at host system and if it find libcanberra then silently enables it
lets make it consistent

(From OE-Core rev: 7bf11ce14336eff07a4e7216fb485f98757088ed)

(From OE-Core rev: 70de1dbb660461bdf0613494f53ec4c78738ae2a)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-06 09:49:50 +01:00
Kristian Klausen 73384ac936 wic: Add extra-space argument
This allows extra space to be added after the last partition and is
especially useful when free space is needed for ex: adding partitions on
first boot with ex: systemd-repart[1] and the image is tested in QEMU.

[1] https://www.freedesktop.org/software/systemd/man/systemd-repart.html

(From OE-Core rev: f81b188bcf5aa18746fd622eb7b5c0dcb0b5c93d)

Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-06 09:49:50 +01:00
Peter Kjellerstedt f97a29af63 common-licenses, licenses.conf: Remove duplicate licenses
This removes BSD-0-Clause, Nauman, tcl and vim and adds mappings for
them to their SPDX counterparts (0BSD, Naumen, TCL and Vim).

It also removes FreeType, which already had a mapping to FTL.

(From OE-Core rev: 35d699c479b6ce6acafbf75fb003618aaad094d7)

Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-06 09:49:50 +01:00
Kristian Klausen d5f2b5b7ec systemd: Add homed PACKAGECONFIG
If systemd is built with fdisk support[1] and the openssl and cryptsetup
PACKAGECONFIG are enabled, systemd-homed[1] is automatically enabled.
The org.freedesktop.home1.conf file was forgotten, so this commit adds
the file and make enabling homed a explicit choice.

systemd-homed.service and systemd-homed-activate.service have a Also= on
each other, so "systemctl" has been fixed to handle the circular
dependency.

userdb isn't strictly speaking needed for homed but "systemctl" can't
handle the missing unit file and upstream recommend enabling both[3].

[1] Automatically enabled if the fdisk dependency is installed which it
    is as util-linux is pulled in by systemd
[2] https://www.freedesktop.org/software/systemd/man/systemd-homed.service.html
[3] https://github.com/systemd/systemd/commit/871dc8d644eef7542a5330f84c25b1db2617317c

(From OE-Core rev: fff339b5bd7789db5d0c024fc84490ac17fa4fe9)

Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-06 09:49:50 +01:00
Richard Purdie f2728d3ec8 build-appliance-image: Update to master head revision
(From OE-Core rev: ffb886497390d4de2631bda671f2f631bc0bc7be)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
3.4_M3
2021-09-04 08:54:55 +01:00
Robert P. J. Day 98dcd17a5c README: update manual list and names, online docs URL
Minor tweaks to top-level README:
  - add missing line for overview manual
  - correct manual names to match their *actual* names
  - point reader at docs.yoctoproject.org for online docs

(From yocto-docs rev: 0ce9097728dbdca926fdf7065490207d09a34cb0)

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-04 08:46:35 +01:00
Robert P. J. Day a24f1db1b3 ref-manual: update SYSROOT_DIRS_* variable entries
Both SYSROOT_DIRS and SYSROOT_DIRS_BLACKLIST have more current
values.

(From yocto-docs rev: 750ae3fca42e273cd533f9c8b678c2e144164191)

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-by: Quentin Schulz <foss@0leil.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2021-09-04 08:46:35 +01:00