I took out the sections at the end of the manual that talked
about the yocto-kernel tool. This tool is no longer maintained
and there is no equivalent tool. I also fixed the yocto-bsp
tool to be the bitbake-layers tool. This involved some
consolidation of sections.
I fixed some links in the kernel-dev and toaster-manual.
(From yocto-docs rev: 20cda99b301b6327d816c4a4cfb3511ad25c987c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated this section with minor edits.
(From yocto-docs rev: 1bc1dcda5fbab4a66737653164222f4fc5a7289c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section had several out-of-date items. They are all up
to date now.
(From yocto-docs rev: 247f3eceeccc645a1b556aea433d4cf66399e962)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made changes to sync the raspberrypi BSP example to what is
really in the source directories. It was pretty out of date.
Made some minor edits to the sections describing the framework
of the BSP.
(From yocto-docs rev: b222d0988cb365cb1943ee1857e5cfd6b9fe173a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some edits to make the section more up-to-date. Dumped
minnow as a BSP example for raspberrypi.
(From yocto-docs rev: a40515bad28d07d736e1ddd1832c19b074749d53)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more relevant information around the discussion of BSP
layers.
(From yocto-docs rev: 8ca439b0bbfdcf390edb723fd12e8a00d90024e3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that creates a layer using bitbake-layers had old
output. Updated it.
(From yocto-docs rev: c58d738a59f113f8fffe0fc40b22e06b9d96cb6f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reference to tools to help upgrade now exists with the
creation of the section in the dev-manual that talks about how to
upgrade recipes. I converted the bullet item here in the QS to
point to the actual section.
(From yocto-docs rev: b3d8895fefb99799a7c06abff5cc1604530ee36a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did some rewriting to add some references to other sections
in the manual set. Did some other minor clean up.
(From yocto-docs rev: 7e7be31e96a0e73e230b8596b2431716f254e027)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the devtool add -h output.
Updated the devtool --help output.
Fixed wording for the "attic" file associated with the figure
of the workspace area.
(From yocto-docs rev: bc53d9a1236ba2545c112256e886729b08b507de)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided a bit of rationale on why and when you use this command.
Put in several links to help the reader get to related areas where
command use is explained.
(From yocto-docs rev: 7b30f29bfa15dd15f1388bb856e2047be55e7fb9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section covers AUH, devtool and manual. Still need to add
manual.
(From yocto-docs rev: 56f04b1fcc8673e20df6d8f5c65120b03cad31e7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to update the umbrella YP figure and the Poky figure. The
figures changed on the website so this gets them back in sync.
(From yocto-docs rev: f7f1a689a847ab4a01106eadacfccb4bec6c4b01)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old heading was dangerously close to a heading in the
previous chapter. I altered this heading to target more
specifically the content.
(From yocto-docs rev: 797bef2256308531f02e35dc0ef8b1d9cbaff935)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to call out that using the include file is actually
using a MACHINE configuration file in this case.
(From yocto-docs rev: b33838d4711e0c55c6cf78e7491ce97bc9fd519f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This document is not a manual. We are not going to list it as
a full-blown manual. It does not need the "Manual Notes" part
in the title page.
(From yocto-docs rev: 23267dea9a90dda33d646fcfc3e8b7a1c919adea)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section briefly introduces layers but leaves the real
explanation to the section in the getting-started manual,
which this section references.
(From yocto-docs rev: 9b3957a5d7c3a2f6b41ec26205ae31f3b2d05643)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this figure had been being referred to as the YP build process.
However, it is really more of the OpenEmbedded build system process.
Basically, what goes on during a build. I changed the way the
general figure is referred to.
(From yocto-docs rev: 1cb79b04182bd660b37637d9cec7d6edf33fc292)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is for the brief-yoctoprojectqs article.
(From yocto-docs rev: 7237c9a36e855eee9056650455a4b6f3d2412961)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have created an brief article in the form of current YP docs
that is a pared down version of the Quick Start (pre 2.5 release).
The article fills a gap for a short (2-page), process-oriented
article that steps the user through an initial build using YP.
I had to make changes to the Makefile to support building the new
article.
(From yocto-docs rev: 47aace60cea4a892ae1efabb050b240c6abdaec9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This topic was deemed unfit for concepts so I moved it to the
dev-manual and rewrote it to be "Using Virtual Providers".
(From yocto-docs rev: df7d48ac4fcf7ece75681ccf0bbb5699f7ff5ea6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided more details in the explanation and fixed a link to the
section on using virtual providers.
(From yocto-docs rev: ace74e24f001b83c9177266b0a6f15ce96dd04b0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #11525]
Created a note for more explanation for how the
mount program understands the PARTUUID syntax
used with --use-uuid. Added four missing options.
(From yocto-docs rev: d8adf537d305dd55e841dd993c36ee60b5896adb)
Signed-off-by: Kristi Rifenbark <kristi@buzzcollectivemarketing.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had split up the section on x32 into a concept piece and a "how-to"
piece earlier in order to satisfy outside pressure to isolate all
"how-to" stuff in the dev-manual. Doing this put a "conceptual" blurb
about x32 in the new concepts-manual. It has been decided that x32
is not a concept. It really does not fit into the ref-manual either.
So, I have re-combined the intro blurb of the x32 stuff back as the
beginning piece of the "Usingt x32 psABI" section in the dev-manual.
(From yocto-docs rev: 6e8240cc1a90a8d78ff456d3138c525eceea3ee3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided a better flow and a bit more explanation of what Bmaptool
provides.
(From yocto-docs rev: 9a02cd7281038031fc4cdea98f114b9c318947a7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the path to not list "build/" as the example assumes
the user is already in that directory.
(From yocto-docs rev: c3ab6a9e53f48005de73977238c8af3e2061db8b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section to describe the key nature of the host development system
and its role and preparation requirements for use in the Yocto
Project development environment.
(From yocto-docs rev: 379659af343ba84f9c8fc2f47474659e06219c53)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section contains some fundamental terms people decided were
important enough to have in this getting-started manual.
(From yocto-docs rev: 42bfa0d8fc0a61c26f6b2f4b9e285c06255e8b8d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Kristi Rifenbark