The old heading was dangerously close to a heading in the
previous chapter. I altered this heading to target more
specifically the content.
(From yocto-docs rev: 797bef2256308531f02e35dc0ef8b1d9cbaff935)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to call out that using the include file is actually
using a MACHINE configuration file in this case.
(From yocto-docs rev: b33838d4711e0c55c6cf78e7491ce97bc9fd519f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This document is not a manual. We are not going to list it as
a full-blown manual. It does not need the "Manual Notes" part
in the title page.
(From yocto-docs rev: 23267dea9a90dda33d646fcfc3e8b7a1c919adea)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section briefly introduces layers but leaves the real
explanation to the section in the getting-started manual,
which this section references.
(From yocto-docs rev: 9b3957a5d7c3a2f6b41ec26205ae31f3b2d05643)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this figure had been being referred to as the YP build process.
However, it is really more of the OpenEmbedded build system process.
Basically, what goes on during a build. I changed the way the
general figure is referred to.
(From yocto-docs rev: 1cb79b04182bd660b37637d9cec7d6edf33fc292)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is for the brief-yoctoprojectqs article.
(From yocto-docs rev: 7237c9a36e855eee9056650455a4b6f3d2412961)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have created an brief article in the form of current YP docs
that is a pared down version of the Quick Start (pre 2.5 release).
The article fills a gap for a short (2-page), process-oriented
article that steps the user through an initial build using YP.
I had to make changes to the Makefile to support building the new
article.
(From yocto-docs rev: 47aace60cea4a892ae1efabb050b240c6abdaec9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This topic was deemed unfit for concepts so I moved it to the
dev-manual and rewrote it to be "Using Virtual Providers".
(From yocto-docs rev: df7d48ac4fcf7ece75681ccf0bbb5699f7ff5ea6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided more details in the explanation and fixed a link to the
section on using virtual providers.
(From yocto-docs rev: ace74e24f001b83c9177266b0a6f15ce96dd04b0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #11525]
Created a note for more explanation for how the
mount program understands the PARTUUID syntax
used with --use-uuid. Added four missing options.
(From yocto-docs rev: d8adf537d305dd55e841dd993c36ee60b5896adb)
Signed-off-by: Kristi Rifenbark <kristi@buzzcollectivemarketing.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had split up the section on x32 into a concept piece and a "how-to"
piece earlier in order to satisfy outside pressure to isolate all
"how-to" stuff in the dev-manual. Doing this put a "conceptual" blurb
about x32 in the new concepts-manual. It has been decided that x32
is not a concept. It really does not fit into the ref-manual either.
So, I have re-combined the intro blurb of the x32 stuff back as the
beginning piece of the "Usingt x32 psABI" section in the dev-manual.
(From yocto-docs rev: 6e8240cc1a90a8d78ff456d3138c525eceea3ee3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided a better flow and a bit more explanation of what Bmaptool
provides.
(From yocto-docs rev: 9a02cd7281038031fc4cdea98f114b9c318947a7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the path to not list "build/" as the example assumes
the user is already in that directory.
(From yocto-docs rev: c3ab6a9e53f48005de73977238c8af3e2061db8b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section to describe the key nature of the host development system
and its role and preparation requirements for use in the Yocto
Project development environment.
(From yocto-docs rev: 379659af343ba84f9c8fc2f47474659e06219c53)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section contains some fundamental terms people decided were
important enough to have in this getting-started manual.
(From yocto-docs rev: 42bfa0d8fc0a61c26f6b2f4b9e285c06255e8b8d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New section called "The OpenEmbedded Build System Workflow".
This section presents the tried and true flow block figure
that shows what happens when you fire off a build.
(From yocto-docs rev: 5b4313ba87a2ccd139f2b980f4cf097700421cf4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the new section "Reference Embedded Distribution (Poky)"
section to the getting-started manual. The new section required
a new figure. I had to add the figure to the figures folder of
both the getting-started and mega-manual books. Updates to the
Makefile to include the new figure as part the tarfiles created
for each book.
(From yocto-docs rev: e5f44e17d4c1e55b6f229cc3745727e439b5bcb7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is Pock-ee with the emphasis on Pock.
(From yocto-docs rev: fd0accf40a9324060562b75ba9d3b078daf458f6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section introduces the ways a developer can use the Yocto
Project. They can use BitBake from a Linux shell, they can
got through CROPS, they can use Toaster, and they can use the
Eclipse IDE. The section overviews these possibilities.
(From yocto-docs rev: 95af6303364f94f91c94fd0bd1890b4e6351048e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New content that leverages off the same information from the new
website.
(From yocto-docs rev: 1d5bf1501a1d0efe388dc5f4a7f741a272c6301c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This involved removing the general information about layers from
the dev-manual and incorporating it into the new section of the
getting-started manual.
(From yocto-docs rev: 26438b03751948661f48fb0c023e393101b80e19)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created content for "What is the Yocto Project" section.
Involved a new figure that had to be shared in the mega-manual
figures folder.
(From yocto-docs rev: 72c18abd11587f4d78848afb8a71ff7f4a0e76d0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have added a chapter to the getting-started manual that will
introduce the YP. Just the framework exists at this point.
Changes to the mega-manual.xml file were made to include the
new chapter in that manual as well.
(From yocto-docs rev: 8a52156ac02d9a9a97c5f0cd8dce5f70d2be68d0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section that provides a closer look into the build system has
moved from the getting-started manaul to the concepts-manual.
I fixed all the links, provided some coded formatting of the
entire section, and made general updates.
The other manuals had links that needed fixed due to the move.
(From yocto-docs rev: b83a5619f56ebd9879fdcadcf474859e68b26d58)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list of *.png files included in the TARBALL variable setting
changed due to figures moving from the getting-started manual to
the concepts-manual.
(From yocto-docs rev: 1439fa9f22a2b2746aa8e8303205f5ec33c7f67b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figures from the deeper look of the build section got moved
to the concepts manual. Removed these unused figures.
(From yocto-docs rev: 13175a89b6d7bf79a86f4ac45d5f2cd78ba02108)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to move these figures from the getting-started manual to
the concpets manual.
(From yocto-docs rev: ba221db465a7535197d9e29f5136ef2d3a6e3171)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section on BitBake syntax appeared in the Getting Started
manual. I decided that it should live with the section on
writing a new recipe.
(From yocto-docs rev: 8d83ce3e11405b2f12f27cdd117a19c4af52146a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed redundant links, changed some wordings. This was a general
scrub of the prose.
(From yocto-docs rev: 2c0ff0af7df3aa46fc05aaf28039a2ffb380424a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Kristi Rifenbark