This was not compiled for x86_64 when previously testing aarch64
so some tests were missed.
(From OE-Core rev: c2cb8827dc5bdeadd78f462398630c05e5a9ebb7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dependency on systemd-systemctl-native is only needed if _both_
systemd and sysvinit are in play.
(From OE-Core rev: 3ea08f4b24f8a49c3d5039b62b39d6419cfe234c)
Signed-off-by: Jonas Bonn <jonas@norrbonn.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will let AUH test-build the proposed upgrades made by devtool.
(From OE-Core rev: 4f93e037357be63253bdf060afedb2f35afc4bfa)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
u-boot mainline supports menuconfig, this patch enables menuconfig for
u-boot using cml1.
u-boot recipe in OE-core handles multi configuration of u-boot using
UBOOT_CONFIG. Since we cannot determine on which u-boot config the
menuconfig should run, the patch limits when UBOOT_CONFIG is not
defined.
(From OE-Core rev: 11278e3b2c75be80645b9841763a97dbb35daadc)
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport a patch that helps with this error which is found
by gcc9
(From OE-Core rev: 93419fb569b827056a422614d3dc29cd41b2b6bb)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
MACHINE = "beaglebone-yocto"
KERNEL_CLASSES += "kernel-fitimage"
KERNEL_IMAGETYPE_beaglebone-yocto = "fitImage"
UBOOT_MACHINE_beaglebone-yocto = "am335x_boneblack_vboot_config"
UBOOT_MKIMAGE_DTCOPTS = "-I dts -O dtb -p 2000"
UBOOT_SIGN_KEYDIR = "${TOPDIR}/conf"
UBOOT_SIGN_KEYNAME = "dev"
UBOOT_SIGN_ENABLE = "1"
IMAGE_INSTALL_remove = "kernel-image-zimage"
$ cd conf
$ openssl genrsa -F4 -out dev.key 2048
$ openssl req -batch -new -x509 -key dev.key -out dev.crt
$ cd ../
$ bitbake u-boot linux-yocto
$ grep signature tmp/deploy/images/beaglebone-yocto/*.dtb
Binary file tmp/deploy/images/beaglebone-yocto/u-boot-beaglebone-yocto-2018.07-r0.dtb matches
Binary file tmp/deploy/images/beaglebone-yocto/u-boot-beaglebone-yocto.dtb matches
Binary file tmp/deploy/images/beaglebone-yocto/u-boot.dtb matches
And there would be no signature info when rebuild from sstate:
$ bitbake u-boot linux-yocto -cclean
$ bitbake u-boot linux-yocto
$ grep signature tmp/deploy/images/beaglebone-yocto/*.dtb
No result
This s because kernel directly edit ${DEPLOY_DIR_IMAGE}/u-boot.dtb, (Note, it
is global ${DEPLOY_DIR_IMAGE}, not recipe's DEPLOYDIR), so that the modified
info is not in sstate, and would be lost when rebuild from sstate.
There are other problems in previouse code:
- The u-boot.dtb is provided by u-boot, but edited by kernel during signing, so
it should be deployed by kernel rather than u-boot.
- The u-boot.do_concat_dtb directly install files to global ${DEPLOY_DIR_IMAGE},
this is incorrect, the ${DEPLOY_DIR_IMAGE} should be installed by do_deploy.
- It seems that it assumes do_deploy depends on do_install according the comments,
but they have no relationships:
# do_concat_dtb is scheduled _before_ do_install as it overwrite the
# u-boot.bin in both DEPLOYDIR and DEPLOY_IMAGE_DIR.
- The do_concat_dtb should be run after do_compile, but it doesn't have this
dependency.
Make u-boot install u-boot.dtb to ${datadir}, kernel copies u-boot.dtb from
${STAGING_DATADIR} to ${B} and deploy it can fix the problem.
[YOCTO #12112]
Reported-by: Christian Andersen <c.andersen@kostal.com>
(From OE-Core rev: 493f70cfb177f1d452a13329647a38642bf2b161)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It uses sandbox_defconfig to produce u-boot tools. But EFI is only
supported by arm and x86, then it fails to run task do_compile on other
arches:
| include/config_distro_bootcmd.h:267:3: error: #error "sandbox EFI
| support is only supported on ARM and x86"
Only enable EFI support for u-boot-tools on x86 and arm to fix the issue.
(From OE-Core rev: f79039497a6bb8521d5dc076924b6eb2626607c5)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This upgrades U-Boot to 2018.11 release and drop the backported
security fixes which are now included upstream.
(From OE-Core rev: 04469ab5b7f0446404b4cb55a15595678581ab26)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since commit 709c603dec19 ("v86d: Accept aarch64 as build host") we
support cross compilation on aarch64 host in addition to x86 host.
However building on hosts different than two above will fail.
Make cross compilation support more generic by checking for TARGET_ARCH
in v86d configure script with fallback to `uname -m` when not present in
environment and pass TARGET_ARCH explicitly in do_configure().
Cross build for x86 tested on IBM Power 8 machine with RHEL7. Should
work on aarch64 and rest too.
(From OE-Core rev: 69f7579eb36c00b557225377e1a3cc61b103be23)
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Integer overflow in src/zm.c:zsdata() causes crash in sz and can leak
information to receiver."
Take a patch from Fedora to resolve CVE-2018-10195.
(From OE-Core rev: a7b50fcee9a295de57f743fa3637905992da722e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Asus EEEPc hardware is well obsolete, upstream repo is now gone.
(From OE-Core rev: 2ac9d94a4d9b88d56ac6af1dd4d7f3d383439a12)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This removes some extra spaces.
(From OE-Core rev: 146ebbc71183e432905b17a127162aba0b464b50)
Signed-off-by: Alexander Hedges <ahedges@ethz.ch>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PCMCIA is pretty rare these days, so now that the recipe is in meta-oe we can
remove it from oe-core.
(From OE-Core rev: 0f8dcb9c717201c4b1edf4fa55880b432bfb7723)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
u-boot attempts to build a Python library called pylibfdt. By default,
u-boot would attempt to use the build host's Python interpreter, which
causes numerous problems, not least of which is that it fails if the
host doesn't have the Python development package installed (complaining
about not being able to find Python.h)
Rectify this situation by including the proper build time dependencies
for pylibfdt and passing the proper arguments to make.
[YOCTO #12867]
(From OE-Core rev: 3b0b16300b351878790729d6270cd113bca73eff)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade to 010.
usbutils uses libusb1 not the older libusb-compat library.
Refresh (and submit upstream) the bashism removal for usb-devices.
Fix LICENSE as lsusb.py is GPLv2 or v3, and set per-package LICENSE fields as
appropriate. The actual license texts are missing from the 010 tarball (fixed
in git) so point at the SPDX statements in the source files instead.
Remove FILES_${PN}-dev as usbutils.pc doesn't exist anymore.
Remove lsusb.py hashbang change as this doesn't cause any problems now
(installed hashbang is /usr/bin/env python3).
Remove spurious zlib build dependency that isn't required.
Remove spurious RDEPENDS_${PN}-ptest, which doesn't exist.
(From OE-Core rev: 889a86d8c044c0a9c6064a542f25e7fecef48234)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub-efi support on arm is enabled as below
commit:
commit 65f9fb788371a9a08e3b0e6febecb9cc2aaeefe7
Author: Kristian Amlie <kristian.amlie@northern.tech>
Date: Tue Jul 10 16:07:12 2018 +0200
grub-efi: Provide target architecture for 32-bit ARM.
* But it fails on arm as below:
| grub-mkimage: error: cannot open `./grub-core//serial.mod': No such file or directory.
Set GRUBPLATFORM_arm = "efi" to fix the above error
(From OE-Core rev: 6ad431974d96aec29d12079be8b94c479b91c446)
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As I will be leaving Intel, this address will no longer be valid,
so swap it for my personal one for now.
(From OE-Core rev: 08c9db07560b85dc24f27e2aa1542b17101751e5)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the recipe specific over-ride for ASNEEDED into the recipe to
make it more apparent that the over-ride is being applied (and that
it should be re-checked on version updates, etc).
(From OE-Core rev: b7b63b2681a1de0ecb0e09612913370cb9934d38)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add missing target and image for aarch64, as the current revision is
already fully compatible with ARMv8.
(From OE-Core rev: 43dc32aa00c87f62dcf9a857d4e32469ce27c9e9)
Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
lsusb can also be provided by busybox (CONFIG_LSUSB), so use
update-alternatives to handle the conflict.
(From OE-Core rev: 3c9ab895f937a7e232780c7cb697e102b5f9aaa8)
Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch tool will apply patches by default with "fuzz", which is where if the
hunk context isn't present but what is there is close enough, it will force the
patch in.
Whilst this is useful when there's just whitespace changes, when applied to
source it is possible for a patch applied with fuzz to produce broken code which
still compiles (see #10450). This is obviously bad.
We'd like to eventually have do_patch() rejecting any fuzz on these grounds. For
that to be realistic the existing patches with fuzz need to be rebased and
reviewed.
(From OE-Core rev: 7e8273cb55df71eaaf2cd50db076b73229ef7566)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch tool will apply patches by default with "fuzz", which is where if the
hunk context isn't present but what is there is close enough, it will force the
patch in.
Whilst this is useful when there's just whitespace changes, when applied to
source it is possible for a patch applied with fuzz to produce broken code which
still compiles (see #10450). This is obviously bad.
We'd like to eventually have do_patch() rejecting any fuzz on these grounds. For
that to be realistic the existing patches with fuzz need to be rebased and
reviewed.
(From OE-Core rev: 7d56245a4859727f85dc5ae6f881d0783dee1ce1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch tool will apply patches by default with "fuzz", which is where if the
hunk context isn't present but what is there is close enough, it will force the
patch in.
Whilst this is useful when there's just whitespace changes, when applied to
source it is possible for a patch applied with fuzz to produce broken code which
still compiles (see #10450). This is obviously bad.
We'd like to eventually have do_patch() rejecting any fuzz on these grounds. For
that to be realistic the existing patches with fuzz need to be rebased and
reviewed.
(From OE-Core rev: 856a70cf6ca9137d5c07c2aa9ef447032589504d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has been fixed upstream since 008, albeit slightly differently so the patch
continued to apply.
(From OE-Core rev: e65ec7a68de6a0d409a5750b2fbd7ebca9acf5a3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This way we could theoretically support multiple bootloaders, and we
keep the convention of boot(x64|ia32).
(From OE-Core rev: 8d158bb4382fd4ef31d37ea5558e07d5eb33145e)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since /boot/ will be recipe/package controlled now we can't just deploy.
(From OE-Core rev: f9c3405a99f3c0fd922d21bea7bb0bd0dd3a2ab2)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes use of the grub-efi-cfg bbclass that was split out to create
a grub.cfg file just like the old one.
(From OE-Core rev: eff14ba3e49d77bfc8167a19a0f58563270f2a51)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dtc is used when generating images which use Device Tree and we
must use the OE version to avoid relying on the host one.
Reported-by: Renato Caldas <rm.santos.caldas@gmail.com>
(From OE-Core rev: 14ee34e85f2b4768fb4488f8e708e678b0e23d5d)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pretty-printing "lsusb.py" script shipped by usbutils is currently
useless, as it doesn't runtime depend on python, and has unversioned
python in the shebang.
Avoid adding a python dependency to current configurations with usbutils
buy splitting lsusb.py into a usbutils-python package, and make it
runtime depend on python3-core.
Make the script usable by replacing the shebang with a direct call to
${bindir}/python3.
(From OE-Core rev: 42af9fedd31ecf5c6210d2f85f20540f85da59f4)
Signed-off-by: Martin Hundebøll <mnhu@prevas.dk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa
Khem Raj
Zang Ruochen
Marek Vasut
Jonas Bonn
Alexander Kanavin
Yi Zhao
Manjukumar Matha
Robert Yang
Kai Kang
Otavio Salvador
Alexey Brodkin
Serhey Popovych
Ross Burton
Changqing Li
Alexander Hedges
Maxin B. John
Joshua Watt
Mingli Yu
Kristian Amlie
Christopher Larson
Alexander Kanavin
Andre McCurdy
Ricardo Salveti
California Sullivan
Martin Hundebøll