This string is now being presented as "bsp_root_name" in the YP
manual set. A BSP name is essentially "meta-bsp_root_name".
It was being presented in the manual set as "meta-bsp_name",
which is not technically correct.
(From yocto-docs rev: 9ad25836b2b3ca79aa3430be014871f50205cf9e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the way we refer to a BSP name. It is really
"meta-<bsp_root_name>" rather than "meta-<bsp_name>". The
name is the whole string and not just the root name.
Also added a tip on ordering the layers in the BBLAYERS
variable in the bblayers.conf file. Order is important.
(From yocto-docs rev: 9c56238295f5631c496377616ea98b860253e6f7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a layer that contains other layers
(From yocto-docs rev: 0cd1881c18e8a63d5f2f078b03fe4e89fd9c75b5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reality dictates that the YP does not treat layer naming consistently.
Layers are talked about as the "meta-whatever" layer and never the
"whatever" layer. However, the tooling sometimes appends or uses
just the "whatever" part of the layer name. A good example is the
meta-yocto-bsp configuration file. All the variables in there use
just the root name of a layer's name. In the manuals, I had been
distinguishing the layer name as just the "whatever" part sans
"meta-". I talked about the convention of using "meta-" in front
of layer names, etc. Well, this is confusing in light of how everyone
says a layer's name is "meta-whatever". So, I fixed all this up.
(From yocto-docs rev: 79e52f6ccf4246fc69a460ce9d3a4a18720a9442)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split this section into two sections: one for creating the layer
using bitbake-layers create-layer and one for adding the layer
to bblayers.conf using bitbake-layers add-layer.
Needed to update some references in the yocto-project-qs and
kernel-dev manuals.
(From yocto-docs rev: 741a29b0cbeaaeaa0ac9155036ace2623938aee3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #12419]
In the section on runtime package management, I created a "Tip"
box to tell the user about using a location for the package
index information outside of the "deploy" area of the hosts
build directory.
(From yocto-docs rev: 2aee814d3d3ed4052fca332693d5416907ae640e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided some key links to help clarify content.
(From yocto-docs rev: 8d27b9946dad89729d30497bcc4de26b9a5c87d9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #12419]
This section was unclear and needed some work. I added text to
help clear things up.
(From yocto-docs rev: 54358a39a5710dbd0cbcfe8dafd2f641ec3863ef)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the fact that this variable is really optional. If you
don't use it then you are setting up a package feed URI that
will include all supported arcchitectures for the package.
Using it means you are setting up specific URIs for specific
architectures.
Added a "Tip" note box to show how you can use the variable
to whitelist architectures.
(From yocto-docs rev: 009f3551aa61aaf6459fd24105a2e06511b59da3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I created a two-bullet "Caution" note to highlight the stuff a
user needs to be aware of that can cause problems.
(From yocto-docs rev: 553bc13e5fd350adb15400afe170e587965929db)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I took out the sections at the end of the manual that talked
about the yocto-kernel tool. This tool is no longer maintained
and there is no equivalent tool. I also fixed the yocto-bsp
tool to be the bitbake-layers tool. This involved some
consolidation of sections.
I fixed some links in the kernel-dev and toaster-manual.
(From yocto-docs rev: 20cda99b301b6327d816c4a4cfb3511ad25c987c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated this section with minor edits.
(From yocto-docs rev: 1bc1dcda5fbab4a66737653164222f4fc5a7289c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section had several out-of-date items. They are all up
to date now.
(From yocto-docs rev: 247f3eceeccc645a1b556aea433d4cf66399e962)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made changes to sync the raspberrypi BSP example to what is
really in the source directories. It was pretty out of date.
Made some minor edits to the sections describing the framework
of the BSP.
(From yocto-docs rev: b222d0988cb365cb1943ee1857e5cfd6b9fe173a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some edits to make the section more up-to-date. Dumped
minnow as a BSP example for raspberrypi.
(From yocto-docs rev: a40515bad28d07d736e1ddd1832c19b074749d53)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more relevant information around the discussion of BSP
layers.
(From yocto-docs rev: 8ca439b0bbfdcf390edb723fd12e8a00d90024e3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that creates a layer using bitbake-layers had old
output. Updated it.
(From yocto-docs rev: c58d738a59f113f8fffe0fc40b22e06b9d96cb6f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reference to tools to help upgrade now exists with the
creation of the section in the dev-manual that talks about how to
upgrade recipes. I converted the bullet item here in the QS to
point to the actual section.
(From yocto-docs rev: b3d8895fefb99799a7c06abff5cc1604530ee36a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did some rewriting to add some references to other sections
in the manual set. Did some other minor clean up.
(From yocto-docs rev: 7e7be31e96a0e73e230b8596b2431716f254e027)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the devtool add -h output.
Updated the devtool --help output.
Fixed wording for the "attic" file associated with the figure
of the workspace area.
(From yocto-docs rev: bc53d9a1236ba2545c112256e886729b08b507de)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided a bit of rationale on why and when you use this command.
Put in several links to help the reader get to related areas where
command use is explained.
(From yocto-docs rev: 7b30f29bfa15dd15f1388bb856e2047be55e7fb9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section covers AUH, devtool and manual. Still need to add
manual.
(From yocto-docs rev: 56f04b1fcc8673e20df6d8f5c65120b03cad31e7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to update the umbrella YP figure and the Poky figure. The
figures changed on the website so this gets them back in sync.
(From yocto-docs rev: f7f1a689a847ab4a01106eadacfccb4bec6c4b01)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old heading was dangerously close to a heading in the
previous chapter. I altered this heading to target more
specifically the content.
(From yocto-docs rev: 797bef2256308531f02e35dc0ef8b1d9cbaff935)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to call out that using the include file is actually
using a MACHINE configuration file in this case.
(From yocto-docs rev: b33838d4711e0c55c6cf78e7491ce97bc9fd519f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This document is not a manual. We are not going to list it as
a full-blown manual. It does not need the "Manual Notes" part
in the title page.
(From yocto-docs rev: 23267dea9a90dda33d646fcfc3e8b7a1c919adea)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section briefly introduces layers but leaves the real
explanation to the section in the getting-started manual,
which this section references.
(From yocto-docs rev: 9b3957a5d7c3a2f6b41ec26205ae31f3b2d05643)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this figure had been being referred to as the YP build process.
However, it is really more of the OpenEmbedded build system process.
Basically, what goes on during a build. I changed the way the
general figure is referred to.
(From yocto-docs rev: 1cb79b04182bd660b37637d9cec7d6edf33fc292)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is for the brief-yoctoprojectqs article.
(From yocto-docs rev: 7237c9a36e855eee9056650455a4b6f3d2412961)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have created an brief article in the form of current YP docs
that is a pared down version of the Quick Start (pre 2.5 release).
The article fills a gap for a short (2-page), process-oriented
article that steps the user through an initial build using YP.
I had to make changes to the Makefile to support building the new
article.
(From yocto-docs rev: 47aace60cea4a892ae1efabb050b240c6abdaec9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Kristi Rifenbark